vulvafan537240

congrats man. i know youve been looking for one for a while now. nice to see you finally got one.

take the oil to the closest oil change place (walmart, jiffy lube etc.) they will dispose it for you. they might take your antifreeze too.

sounds like a plan to me. what if you scratch out a nice, neat rectangle exposing the vin and maybe tape it off and hit it with some automotive clear coat? it should be highly visible then.

x2. wire it up before the switch so its on even with the lights off

man i just found out you are my long lost brother! :laugh:

i coiled mine around the wire but the readings were off. i called trail tech and they told me to tape it to the plug wire. dont wrap it, just tape directly to it. worked fine ever since.

my mph wasnt accurate with the tire measurement method so i set it with a hand held gps. cant go wrong with it that way.

quit bein a wuss and cut em! jk :biggrin:

wow i didnt know that jcwhitney sold 4 wheeler stuff. i guess you learn something new everyay. good deal too!

ive heard alot of good stuff about the one from f.a.s.t. call jeff.

do a plug chop when you get em on

i agree. start rich and work your way down. 27.5 pilot should be fine also.

dont run it lean. less fuel = less lube = ruined top end and possibly rods, crank etc ( i didnt do a plug chop on mine and i let my brother ride the day after i got it and i found out it was running lean the hard way :: ). 21 or 22cc domes should be good for pump gas and yes ditch the boost bottle and put the crossover tub back on. everybody on this site will chastise you pretty bad for even admitting to having a boost bottle. :thumbsup:

start at 300 main, 27.5 pilot and needle in the middle and welcome to the hq! :thumbsup:

frame looks good. i like the black and blue. i also recommend the 4mill. get an agressive dune or drag port if you "wanna go fast". also kehin if you want 35s.

ive seen em at sears. check em out. they look really heavy. the ad said its more power than most 4stroke weedeaters but it looked like a 90cc motor lol.

64.5mm is .020 over. wiseco makes up to .100 over but "big bore" pistons are 68mm and up.

elevation finder :thumbsup:

looks pretty good. x2 on the headlight covers.

i would pay 1200 for it if i didnt already have one. itll probably sell on ebay.

and welcome to the hq! :beer:

get an adjustable timing plate and set the timing to +4. that should help some. also k&n pods. just watch out for big water puddles.

do it! do it! do it! do it! :beer:

its definately different

idk too much about fatties, but ive got some pro circuits and i like em.