BenBB

I'm gettin' Stan a Hansen CD fer X-mas

For work I've got a Motorola 120t, Plateau is the carrier. Pretty decent phone, doesn't like water. Has withstood abuse pretty well for a cheap phone, my only complaint is having to answer the damn thing (free minutes cell to cell so there's always some dumbass co-worker or boss calling). Hafta lock the keys or it will do some funky stuff on it's own. For home I've got an Audiovox, not sure the model but has a color screen, we use Cellular One. Had a Motorola 120c before that, same as above, not bad for a cheap phone. The Audiovox has held up so far, LOUD ringer/ringtones, good standby time, good in-use battery time, survived a few drops on concrete, good mic/speaker (a little too good at times; I've gotten some looks from others as my wife was bitchin' me out for something). Cellular One had no reception in Dumont but everywhere else in Vegas, AZ & NM I had no probs. Still waiting for the Samsung "Matrix" phone...

Few things I've been crankin' lately: Lostprophets Korn Godsmack Adema hed(p.e.) Nappy Roots Ludacris Saliva Drowning Pool Cold Black Label Society Seether AC/DC and the mighty Zep I could go on and on but that's what I've caught myself headbanging to and butchering the lyrics...

Naw, wish I had more pics, I always forget to take 'em and rarely have someone else to get 'em (guess if I was smarter I'd have a 'lil moto-babe running the cam, heh). Email that flyer and I'll post it D34.

Yep Stan, I got the "discount", heh. I was a little surprised they were that cheap, I mean I got every bolt in SS SOHC and every nut for the motor, thought it woulda cost more but I wasn't payin' for it. They've been real competitive on standard hardware tho, at least compared to the other games in town.

Erbilabuc is right on, mine did the same and I had to reinforce it. Just be careful not to make it any wider than stock; not sure what's worse, having the wheels lock and you can't move 'em back or not being able to correct enough in a fast powerslide...

Right on dogboystoy, I measured every bolt outta my RZ and this is what I got: Stator cover: 3-6mmx55mm 1.0 (thread pitch) 4-6mmx15mm 1.0 Clutch cover: 8-6mmx30mm 1.0 1-6mmx40mm 1.0 Clutch round inner cover: 3-5mmx12mm or 13mm 0.75 Water pump inner cover: 5-6mmx15mm 1.0 Water pump outer cover: 3-6mmx20mm 1.0 And a bunch of others like case & PV stuff, but I got SS SOHC bolts from Fastenal for the whole motor (except the funky RZ head nuts) for like $27...

I wish, for sure I'll be at Brashear for the National, trying to make Twin Creeks & Paducah but hafta see what happens... I was probably there at the same time you were last year; I raced Open Am, on both ST & TT. First time I got 14th in TT and like 17th in ST, the second one I finished 3rd in TT and 4th or 5th in ST; there were some seriously fast guys there. First time I'd ever been on a "real" track like that, or any ST for that matter. That sucks you gotta miss Orville, closest I've been is seeing it on Quatros Locos & Huevos Grandes, looks like an awesome track (nothing like around here, heh). Hopefully I'll see ya in TX in a few months.

Yes Proquad101, I went to Brashear last year...June and August , had alot of fun and ran with some damn fast quads. Mark did an awesome job I think. Kind of a long haul for me so October will probably be the only one I get to. Are you going to all the Nats?

You don't hafta drain the oil, just flip the quad up on the right side. Even if you don't flip it up, you won't lose hardly any oil when you pull that plastic peice. It just covers the end of the shift drum (only used as a neutral indicator on RZ's), the white plastic part has an o-ring seal on it... BTW on my case saver, the plastic type, you don't even need to pull the white plastic thing off, just remove the bolts, set the case saver in place OVER the white thing, and use the longer bolts. I also had to shave the stator cover slightly at the top rear to clear the case saver. Good luck.

I think the rider's meeting is at 7:30am Sunday, they'll announce the race order then. Prerun is 11am-4pm Saturday, I should be there between 2 and 3...

Hey Yamahammer! You and evil consider doing Coalfest shirts? Thread here: http://www.bansheehq.com/forums/index.php?showtopic=24662 I could start another thread if you need a certain number of preorders to get 'em done, just to find out if there's enough interest to make it worthwhile...

HELL YES!! I love that show! Vic Romano and Kenny Blankenship are the shit! Fucking hilarious, if you haven't seen it I highly recommend you check it out, I think Thursday 4/1 is gonna be another all-day marathon of MXC... On a side note I'm kinda pissed tha Sci-Fi channel quit running Mystery Science Theater 3000, that was another classic.

Sent you a PM "thenewguy", I'm interested.

Sounds like the stator is shot, red to green is the ignition part of the stator, it should be 13.7-20.5 Ohms. I would recommend a Ricky Stator, stock ones all tend to fail eventually...

I had the same problem, installed a locknut from Alloyspecialties.com and haven't had it come loose since. It also has two allen bolts, looks and works great.

Bring back the first one!!

Led how was LS? Where's the pix?

Up at the top of the page click on "My Controls", then on the left of the page find "avatar"...

I agree with zep; no rejet. Everything you wanted to know about rejetting (well almost) is in the Jetting FAQ in my sig below...think Lee has it on the main HQ page too now...

Allright ABM & Ridingorhiding, I'll be at the Rio Puerco next weekend. Hope you can make it too Labarraca_Baca, Chris sez it's a nice fast course...

Funny how the pix & avatars match, heh. Nice ones guys!

Brashear, TX for sure on October 16 & 17, not sure if I can make Paducah & Twin Creeks or not yet...

Congratulations Scott!

Here's mine earlier this year...