Jump to content

Building my First

Members
 View Profile  See their activity

  • Posts

    498

  • Joined

  • Last visited

 Content Type 

Everything posted by Building my First

  1. Building my First
    Even if the bore is true, at .05 mm of wear you are going to get some blow by and probably loss in compression not to mention those new pistons will get slapped up faster. .03 is the max I would let it go.
  2. Building my First
    Kicker is a little sloppy. If you want it $15 shipped.
  3. Building my First
    I have the adjuster and nut, not sure about the lock washer. $12 shipped?
  4. Building my First
    I have some good spindles and hubs. $57 shipped. Also have calipers and lots of other parts, PM me if interested.
  5. Building my First
    Cases, Headlights, Carbs, & CDI Box SOLD. Still alot of good parts left.
  6. Building my First
    If either of you wants another stock fuel valve, I have one. $25 shipped
  7. Building my First
    If the clutch actuator will not pull out and you have the clamp off, the rod must be welded to the actuator. I've never had that problem. It seems like you should be able to turn the actuator back and forth till the spot weld breaks and then you should be able to pull it out. If you end up needing an actuator and rod PM me I have a nice set for cheap. Not sure if I have an extra ball, I'll have to look.
  8. Building my First
    Stator and pickup coil SOLD
  9. Building my First
    Spray some carb cleaner in the rod channel to clean the excess oil away, let it evaporate.I used an old rod that was screwed up, take some gum that you've been chewing on all day and stick it to the old rod and let is sit for a minute. After it sits for a minute it will stay on the old rod instead of coming off in the channel, stick it in the channel and you'll feel it smush against the good rod, hold it there for about 10 seconds and pull it out slowly.
  10. Building my First
    Rear Brake Caliper & Master Cylinder SOLD
  11. Building my First
    I have good inner hub and pressure plat for cheap, if thats mainly what you need. The outer basket has dogging and the cushions are worn.
  12. Building my First
    J arms SOLD
  13. Building my First
    It is the older round plug cdi.
  14. Building my First
    PM sent Shipping label printed, I'll send out first thing tomorrow.
  15. Building my First
    I have an excellent oem crank. $160 shipped http://www.bansheehq.com/forums/index.php?showtopic=115511
  16. Building my First
    $12 shipped. http://www.bansheehq.com/forums/index.php?showtopic=115511
  17. Building my First
    I have some good Razr's 20X11X9 $50 + shipping or pickup. http://s636.photobucket.com/albums/uu89/aj...e%20Part%20Out/
  18. Building my First
    I have a nice pair, $50 shipped. http://s636.photobucket.com/albums/uu89/aj...e%20Part%20Out/
  19. Building my First
    Sorry no rear hubs.
  20. Building my First
    Get em while their hot! Parts will be hitting ebay on Monday. I will combine shipping for multiple items.
  21. Building my First
    Wire harness SOLD
  22. Building my First

    wanted

    Building my First replied to UTYFZ350's topic in Wanted

    You looking for just the plastic guards or the nerfs too? I have a stock set in decent shape, I think one of the little plastic nipples is broke but still work good. $65 shipped. Or I have an old DG pair in the for sale section.
  23. Building my First
    I want to sell them together for now.
  24. Building my First
    I have some fronts not listed, race cut and uncut. I can't decide what route I want to go. PM me if interested. http://www.bansheehq.com/forums/index.php?showtopic=115511
  25. Building my First
    I know I have a brand new set, one is broke by the hole. Headlights are in my listing. http://www.bansheehq.com/forums/index.php?showtopic=115511

BHQ Quick Links

×
×
  • Create New...