differentstrokes

I've got a set of blue rears that are cut if anyone's interested.

Sorry man, the 2 into 1 was the first thing I sold. The cable is gone too.

I'm chilling at the house and already downed 5 Weiser's. Bad thing is that I've got to work tomorrow, oh well...I'm making serious bank so far this year.

Sorry bro, the kicker is gone. All I have is the front brake system and master cylinder, swingarm, steering stem, baedlocks and hubs, front 21x7x10 razrs, wiring harness, frame, and the radiator and hoses...this thing sold fast as hell, but it was all clean stuff. Hit me up if you need anything.

Thanks for the feedback, even though I parted the Banshee I'll still be around. Hit me up if you need help with the light wiring. Jared

PM sent, as for the partout...I honestly have zero time here lately and have thought about selling the shee for awhile. I've got my other bike, plus I have 2 small kids wanting daddy's attention all the time. This was really the only way to get what I wanted out of it, I'm not hurting for the money by any means but I just can't keep up with all my toys and the family. I did buy a ton of shit for my Honda, though. haha, flexx bars, gt thunder suspension, you name it...I'll still be riding. Wait till you see this badboy... Jared

Thanks bro, glad you're satisfied with everything. Hit me up if you need anymore help. Jared

I've got what you need as far as the shroud. It's blue and in great shape...$25 shipped

I've got a set of LRD RFX pipes. The expansion chambers are perfect, one silencer has weld where the stinger tube enters the silencer but it's not visible when on the bike. Comes with billet hangers. $380 shipped. Listen to them run... http://www.youtube.com/watch?v=7wrNqN7difA

Shocks are on ebay, the link is in a post in this thread.

Clutch lever and steel cable SOLD to clunker. I need this stuff gone, anybody interested in some Hella 500's with mounting bar? If not they're going on ebay. Got some rear polished Douglas beadlocks with 1 ride on them...perfect shape. 10X10 and have the 4/156 bolt pattern but I will include the hubs to fit so you can just slide them on to your current axle. These work on all Yamaha ATV axles. Take them off my hands. I also have some iRazrs to fit these with 90% tread at least (1 trail ride on them and some play time around the house). I've also got a pair of 21x7x10 regular Maxxis Razr fronts with around 85% tread on them in the garage that need to go. One has a plug but holds air perfectly. Make an offer. Got a stock stem, linkage, radiator, wiring harness, coil pack...you name it, just haven't taken the motor apart.

Clutch lever is still for sale, like new condition and retails for around $40-45... I'll take $25 shipped. Streamline steel braided clutch cable with only one ride on it... $20 shipped New aftermarket stock style clutch cable... $12 shipped Moose bar type aluminum brush/handguards, need one bolt from the hardware store...$20 shipped I've got a bunch of other stuff, email me for pics

A-Arms are sold to floydfan_90 pending payment. If you want something you don't see, speak up cause I need this stuff out of my garage now that it's in pieces.

Just thought I'd simplify everything since I have alot of things on ebay, click the link to see what I've posted so far and if you don't see what you need just hit me up. http://motors.search.ebay.com/_W0QQsassZ2strokenewbie

Yeah, I haven't even listed them on ebay yet. They're LRD RFX pipes. The expansion chambers are perfect, no flakes, rust, discoloration or anything. The billet hangers come with them. One silencer had a brass weld where the stinger enters the back of the silencer. This is not visible with rear fenders and is completely fixed (zero leaks). The silencers are high polished, not brushed aluminum and the packing is good. Comes with springs too and the o-rings in the expansion chambers are fresh too. All you need is clamps. By the way, I sent your stuff out this morning USPS priority so it'll reach you by the middle of next week. Click on my sig link to hear the pipes. Make me a reasonable offer.

I've got 3 sets of bars that need to go... 7/8 Renthal cr low bend (I think) in aluminum color without a barpad, okay shape/no bends 7/8 Azonic deluxe wall bars cr hi in aluminum w/ injection molded barpad and spider grips installed (very nice, these are what was on my bike and I paid almost $80) 1 1/8 Trail Tech X bars in gold color (fat bars) in good shape Rox 1 1/4" billet block risers (perfect) fits standard 7/8 bars comes with stainless socket head bolts to fit, paid $45 new Graydon Proline polished billet bar clamp (dogbone) Hit me up and I'll get some pics if anyone's interested, really just taking offers first

Throttle is sold, make me an offer I can't refuse on the shocks.

Kicker and clamps are sold pending payment, not sure on the proflow so make me an offer.

All PM's returned, 2 INTO 1 CARB SETUP IS SOLD!

Also have the billet Devol kicker in my signature pic, I'll take $45 shipped, doesn't rattle either. Exhaust clamps in my sig pic too, $30 shipped.

I have the key switch and 2 keys, stock throttle with billet cover and tors plug removed, not sure what you mean by receptical? I don't have a stock bumper. Shoot me some offers.

I've got the frame, just need to pull some stuff from it still. It's a 2004 like the title says, it has 1 hole where the grab bar mounts that needs to be rethreaded. I've been running a smaller bolt through the hole with a nut on the other side. Everything else about it is straight, no bends and hasn't been wrecked.

I'm parting out my 2004 Banshee, I'm just starting to take it apart so if you need something just hit me up. This stuff is going on ebay also, but if the offers are good I'll end early. I'm trying to sell the motor as a whole, so I won't have any motor parts just yet. 35mm PWK 2 into 1 w/ adapter and UNI clamp on Elka Rec series shocks, dual rate 180-200lbs XC, valved for +2 arms but will work with stock arms too Pro Design Proflow plate and K&N filter w/Outerwear, has 1 ride on it and was just cleaned VForce 2 reed valves, perfect petals GYTR cdi, perfect shape and ready to plug in Blingstar Ironcross bumper, a few minor nicks with no bends Complete with seat with like new Ceet gripper cover http://i45.photobucket.com/albums/f82/Jare...123/ebay010.jpg IMS 5.6 gallon tank, "natural" color with petcock and gas cap, motion pro fuel line, and mounting hardware http://i45.photobucket.com/albums/f82/Jare...123/ebay011.jpg MSR Raptor shorty clutch lever, forged and has the "adjust on the fly" Streamline braided clutch cable, perfect shape and only has 1 trail ride on it

I've got some ASR fully adjustable +2,+1 arms with tie rods and all. Great shape, they have a few small places that have peeled. These also have heims. Make an offer.

I'm all about the angle grinder and cutoff disc (I use electrical tape), then use a razor or utility knife to take the melted edge pieces off. Sand them smooth with fine grit paper (filing the edge a little doesn't hurt either) and use the torch to finish them off.