SAVAGE420

From left (Rich as all hell) all the way to the very right one (Perfecto). http://i27.photobucket.com/albums/c164/savage_420/plugchops.jpg Doing it the PROPER WAY http://www.dfn.com/benkaren/plugchop.html

Of course. Just make sure you get your jugs ported for a 4mill. If its already ported for a stock stoke you "might" not be able to get it ported for a 4mill, if alot of cutting was done. So keep that in mind when you make the decision.

It goes in front of the lever. With the screw make sure you put a dab of Blue lock tight on them, then screw them down till they bottom out then a good 1/4 turn more and your good to go. Pic to show you >>> http://www.bikebandit.com/houseofmotorcycles/showschematic/m6965sch106007

Read this TWO times out loud to yourself. http://www.dfn.com/benkaren/plugchop.html When you warm the bike up completely on the OLD PLUGS and get to the exact spot you can do a long 6th gear pull, then shut it down and quickly put the NEW ONES in and start it and instantly go WTFO into 6th for a bit. THEN hit the kill switch and pull in the clutch. Then coast to a stop and what not. Take the NEW PLUGS out and stick the OLD ONES in and ride home and chop the NEW PLUGS that you just ONLY did a WTFO pull with. Dont idle for more then a couple seconds with the new plugs you want to chop and check. Do the steps to a "T" to get the results you want. Mess with a step then it wont work, follow me?

No

Of course. Just im too damn far away.

Thats getting sorta low. Did you check with 2 gauges back to back to make sure the one your using is spot on? The cyls could be outa round (egg shaped) now and the rings could be getting worn also. Check with another gauge to be sure. Hell when i was on my stock bore stock pistons few years back, i ran it all summer and she was tired and only kicked 87psi per side and still started 2-3 kicks and ripped really hard still. I say rip on it this summer until you want to go the next bore up with new pistons/rings and gaskets man. Very cheap and easy as hell to do.

Well if i got some, ill give them too you man. But if i don't just snag a lil piece of 1/8" aluminum and cut two 2-1/2" long strips 3/4" wide and drill a 1/4" hole in the top and bottom. Then round the edges and corners off nice and clean then polish them up nice. Also use some lil bushings or o-rings so there NOT solid mounted. Don't solid mount the fronts ether. Unless you like to weld your pipe tabs later down the road. Just basically measure up how long and wide you want them then go and cut. But i think the length above will be perfect man. Hell and look good too and serve its purpose!

What kind Aman? I will have a look in some boxes for ya.

WHOLLY fuck, thats no good. Hope your dad get better soon Chad man. Thoughts are with your family bro.

5lbs right here. 5lbs more in the fridge lol HELL YA. Proly fill my dehydrator 10 times or more ..shit will last till summer i bet and i eat alot of this stuff. http://i27.photobucket.com/albums/c164/savage_420/Funny/BEEFJERKYMMMMMMMMMMMMMMMM002.jpg http://i27.photobucket.com/albums/c164/savage_420/Funny/BEEFJERKYMMMMMMMMMMMMMMMM001.jpg http://i27.photobucket.com/albums/c164/savage_420/Funny/BEEFJERKYMMMMMMMMMMMMMMMM003.jpg How can i go wrong for 10LBS trimmed and cut for 35 bux a time..... Making 4 diff flavors this time around.

Welcome back from wherever lol. Hell just buy Garys 250R, shits loaded and a good deal man.

Well im doing 10LBS right now of some MOO MOO Spicy Peppered Teriyaki stuff. But its ALL mine lol. God damn does it ever smell so damn good in here right now. But i have a free deer roasts in the freezer though. Maybe i will do some up of that one day here and let you a sack of it. Any flavor i guess also... don't matter to me.Just need the time to get it all cut and soaking and what not...Trade for parts haha just kidding i don't need anything..

http://bansheehq.com/forums/index.php?showtopic=92579

No effin kidding. If people don't know how to post a pic or 2 using the site or ever easier using Photobucket. Well they should just sell there computer and fail like they already have! Pm or email for pics is fucking stupid..yes thats right i said it. fucking stupid. Post a pic or GTFO, in my opinion anyways.

I moved the pics but here is a thread i started a while ago. http://bansheehq.com/forums/index.php?showtopic=120396&view=&hl=rockets&fromsearch=1 IMO, i wouldn't run some unless you got quite a bit of work done and all the bolt ons. If i didn't i would have kept the T5's. Have a few pics in my gallery if you need to see for some reason. http://bansheehq.com/forums/index.php?app=gallery&module=user&user=19938&do=view_album&album=1052 So whats wrong with my Avatar

Yeah, pingle helps a bit. But its not a big deal without one. Even after a long ass ride or few good pulls my rockets cool off pretty damn quick and its not like you have to turn the fuel off seconds afer you stop your bike for the day anyways. It isn't needed but if you have girly hands and need the fuel off right away for some reason, well then spend the $80 and get a pingle. Or wear your gloves to turn the pet cock off. I don't mind the pingle though.

Amsoil Interceptor. 50:1.......

Your lean as all hell. Atleast on the top. Get on that before you melt the pistons. Read the link posted and also do a Proper plug chop after you richen it up. Always start rich and work your way down. If you cant do it by feel or experience, well then do this too the "T" and don't miss or mess with any of the steps. http://www.dfn.com/benkaren/plugchop.html

I agree! Hell, i dont think ive ever seen a Banshee that is or hasn't in the past had the steering stem hoop bent. Even just a quick roll over lightly will bend it for sure. Shit is cheap as hell made from the factory. Mines all gusseted up now so its strong as all hell.

Yo mofo.

If you trying to get the ball joints to pop outa the spindles just give the spindles a good couple wacks with a hammer lightly till she pops out. Or if shees really tight, just thread the castle nuts on so that the top of the nut is Flush with the top of the threaded part of the ball joint. Then smack the top of the nut with a hammer and she will pop free. It works quick. Good luck

Yippee for the email.