Tim C
-
Posts
433 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Gallery
Store
Everything posted by Tim C
-
I saw a thing on TV a couple years ago and they said them F1 cars idle at about 7000 RPM and rev to about 18000 RPM. There wouldn't be much left to them engines when they blow - it would be like a bomb going off
-
The dial-a-jet goes onto the carb - not into the air filter.
-
Maxxis IRazr - it was a whole different bike after I put them on - incrediable traction
-
How much for the A-arms
-
Why buy two sets of pipes - one for before porting and one set after. I have CPI's and no porting and they work fine
-
Ya it the 4 original members - they've been on tour now for a year
-
Any Motley Crue fans on here? I'm going to see them tomorrow night - I got front row seats and I can't wait......I saw them in Montreal last April and it was the best concert I ever been to
-
That seal can be changed easily - pry it out with a screw driver and put the new one in. The seal is only a few dollars. I usually drive the screw driver through the old seal and pry it out that way so I don't nick the case where the seal sits
-
Here: http://www.bansheesuperstore.com/www/bansheesuperstore/
-
Don't buy the Bandit XC (steel belted version) go with the AT's because the XC's is hard as a rock. I had both sets and I hated the XC's - every little rut it would jurk the bars because the tire had absolutely no flex to it at all - you'd think they were solid rubber by they way they drove.
-
Check out this forum - you might find what your looking for http://www.planetsand.com/ubbthreads/ubbthreads.php/Cat/0
-
I have the Trail Tech lights and I really like them - they're alot brighter then the stock lights
-
Buy a cable luber (about $8) and keep the cable lubed - it will help some
-
Nice bike...........maybe I'll see ya there
-
They're just a few small pits............definitly not worth driving from Ontario for
-
You get what your pay for
-
Hey Banshee_LE Do you ever go to the sand pits in Rogersville
-
Miramichi ..........where do you live
-
Raptor pegs will bolt on but will be back a bit so you might have to shorten your shifter and rear brake lever Here's a link to mine - it's two sets of Raptor pegs on a backing plate I made http://www.bansheehq.com/forums/index.php?...&cmd=si&img=473
-
I'm from New Brunswick
-
what does everybody do for a living?
Tim C replied to bansheeman1974's topic in General Banshee Discussion
Civil Engineering Technician for the Dept. of Transportation -
Buy directly from Elka - they set them up specifically for you and they have fast service - I had mine in a week
-
You will gain noticable power with Vito's SS pistons
-
Why waste money on race gas if you don't need it
-
I run 21cc domes with my timing advanced and Vito's SS pistons at sealevel (no porting) on pump gas (91 octane). I have about 150 - 155 lbs of compression so its getting close - I usually dump a little octane booster in