Jump to content

Tim C

Members
 View Profile  See their activity

  • Posts

    433

  • Joined

  • Last visited

 Content Type 

Everything posted by Tim C

  1. Tim C
    I've had 3 sets of Bandits and the wear great but they don't hook up anything like the I-Razr's I've got now
  2. Tim C
    I have Maxxis I-Razr and I love them
  3. Tim C
    Where in New Brunswick do you plan going to
  4. Tim C
    Here - OMF Beadlocks with IRazr's http://www.bansheehq.com/forums/index.php?...&cmd=si&img=475
  5. Tim C
    I run the the Super Stock Pistons and like them. You will see quite a difference in power but I'm sure they don't compare to a good port job.
  6. Tim C
    Yamaha's site says the new model intro will be Sunday June 12 at 9 PM Pacific
  7. Tim C
    I seen that done before - I think it was on Duncan Racing's Banshees for the 12 hour Pont Du Vaux race in France
  8. Tim C
    You adjust the dial-a-jet to fine tune the jetting by turning the dial. So you don't have to go through the bother of changing main jets
  9. Tim C
    You put a smaller main jet in and then the dial-a-jet puts the rest in to the carb. It sucks fuel from the bowl up to the dial-a-jet. I have Vito's version of it and it works good.
  10. Tim C
    Put the tires in water and look for bubbles - you should be able to find the leak this way
  11. Tim C
    Maxxis IRazr - hook up great
  12. Tim C
    I've had a Cascade grill for 10 years now and I love it and it still looks great. They are a good company to deal with also.
  13. Tim C
    I just put a set of Maxxis IRazrs on my bike and they hook up really good. They are the best I've tried - where my others would spin these things stand the bike on end.
  14. Tim C
    When I had FMF's I had to space the silencer out a bit to keep from hitting my DG grab bar
  15. Tim C
    ATV Sport magazine did a dyno comparision between a bunch of pipes about 3 years ago and the Graydon Prolines were pretty good - right there with Pro Circuits and LRDs and a little more power then FMF -SST's.
  16. Tim C
    They usually update their site in June with the '06 models because they are released late summer/early fall. Dealer told me yesterday there is a new Grizzley coming out in '06 but they won't know any details on it until probably next month.
  17. Tim C
    Try these guys: http://alba.buyol.com/Virtual/VirtualPages...8P37O57CWYTL1IH The Patriot graphics kit would match good
  18. Tim C
    Try these guys: http://www.quadpro.ca/en/index-accueil.html
  19. Tim C
    Spray white heat (manifold) paint inside. I read this somewhere and tried it last year with my CPI's and they still look new never blued at all.
  20. Tim C
    Have you tried both pipes? - I have and the Toomey's never impressed me any more then the FMF's did
  21. Tim C
    What do you mean there is no comparison? njbanshee - both pipes work good, I'm sure you would notice very little difference between the two pipes
  22. Tim C
    I've run Vito's SS pistons for 3 or 4 years now with no complaints. You will definitly see a noticible power gain.
  23. Tim C
    Try greesing the bushings in the bottom of the front shocks - I had this happen to me a few times and it anoying as hell. Take the shocks off and take the bushing out of the bottom and clean and greese it good.
  24. Tim C
    I used acetelene torch so propane will definitly take longer but still should get hot enough. The shit will just start squirting out when its hot enough then remove the u-joint the same way any other u-joint.
  25. Tim C
    Check the steering stop near the bottom of the steering stem. Some time the stop gets bent out and allows the ears on the stem to turn past and once it turns so sharp the steering locks. I beat mine back into place and welded a gusset on it to keep it from bending out again.

BHQ Quick Links

×
×
  • Create New...