digger Posted February 8, 2006 Report Posted February 8, 2006 i've heard a lot of people say that they run a 32:1 mixture, is this a safe thing to do, i am new to banshee's and i dont want to lean it out too much and blow it up. right now i run it 24:1 like the manufacture sugests. Quote
ellison445 Posted February 8, 2006 Report Posted February 8, 2006 I run 32:1, and Welcome to the HQ Quote
banshee tuner Posted February 8, 2006 Report Posted February 8, 2006 Welcome to the hq, I run 40:1 and run 50:1 for years with no problem. Run what your oil suggest on the back of the bottle. Quote
bigboybanshee Posted February 8, 2006 Report Posted February 8, 2006 Welcome to the HQ! A lot depends on the type of oil you're running as to which premix is best. Some oils don't require you to run as much oil in the mix as others do, it's always a good idea to see what the back of the bottle suggests, as mentioned above. Right now, I run Maxima 927 @ 32:1 Typically, the 24:1 premix is only used during break in Quote
midnite Posted February 8, 2006 Report Posted February 8, 2006 I use golden spectro @ 42:1 like the bottle recomends. Thinking about trying castor 927 @ 40:1. Quote
PUSH THE THROTTLE Posted February 8, 2006 Report Posted February 8, 2006 80:1, but I'm running Amsoil. It all depends on your oil. Quote
icecold_shee Posted February 8, 2006 Report Posted February 8, 2006 32:1 klotz benol, smells real good Quote
FIRST BANSHEE Posted February 8, 2006 Report Posted February 8, 2006 I've always have run 32-1 with no problems. klotz r 50 Quote
r2n2d Posted February 8, 2006 Report Posted February 8, 2006 I am running 50:1 amsoil Dominator Quote
knight_ripper Posted February 8, 2006 Report Posted February 8, 2006 32:1 Bel-Ray H1R Synthetic. 50-50 VP110-91 pump. Quote
fastbanshee4u Posted February 10, 2006 Report Posted February 10, 2006 Different mixtures cause this-24:1 creates a thicker gas,therefore less gas gets through those little jets.40:1 is a thinner gas that flows through the jets faster.So the more the oil in your gas your actually leaning your motor down.Pick a good oil and mixture and stick with it.Also the less oil in your gas,the less your crank bearings get lubricated.You could also base your mixture on how hard you ride.Race-32:1 ,trail ride 40:1. Quote
Ducman Posted February 13, 2006 Report Posted February 13, 2006 40:1 with Maxima Castor 927. One bottle per 5 gallons, keeps it simple. Quote
Shee-Male Posted February 13, 2006 Report Posted February 13, 2006 32:1 for life! I've used Motul and Bellray H1R & SI7, same results but I find the SI7 burns cleaner. Quote
Hilarious Posted February 13, 2006 Report Posted February 13, 2006 Another 927 @ 32:1 here with no problems........ yet! Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.