finishing my long serval build

[special06shee]

I cant tell ya that, only ran oem ones before i cut them off. But i would suspect they would use oem mounts...

[RagunCajun]

Rear silencers bolt to lower sub frame rail.. Right behind the rear fender mount.

http://i240.photobucket.com/albums/ff111/raguncajun/DSC01897-2_zpsptczhfuw.jpg

 

#5 ?

 

and i see where the heel guard bolts to in this googled image

http://www.can-amtalk.com/forums/uploads/monthly_07_2012/post-17987-1342030161302.jpg

[special06shee]

Stock silencers bolt to #5. Make sure you clean that part up. Imo, too many peps(including myself once) overlook that and its just a plain eye sore.

[Bennett131]

I almost forgot those myself. Glad I removed them though. Might want to think about welding gussets on the steering stem stop.

[RagunCajun]

thanks guys. I grinded both stock exhaust(expansion chamber) parts off. My grinding wheel was finished. So that was all for today. I will finish the rest after work.

[rjdgriff]

http://i240.photobucket.com/albums/ff111/raguncajun/DSC01897-2_zpsptczhfuw.jpg

 

#5 ?

 

and i see where the heel guard bolts to in this googled image

http://www.can-amtalk.com/forums/uploads/monthly_07_2012/post-17987-1342030161302.jpg

Looks like cock and balls being drawn on your bike Ahahahaha

[RagunCajun]

I have most of the brackets off. I will finish up tomorrow if it doesnt rain and i have time. Are you guys using some sort of sand paper to make the grind areas more smooth? I can only get it so nice with a grinder. There isnt any gashes. I want to be sure it's not too bad so powder coating will take care of it and it wont be noticeable.

[rjdgriff]

[RagunCajun]

Oil field still sucks. Long story short, im finally ably to finish it. A few things back from the powder coater today. The rest i brought will be here after mardi gras. I know the colors choice isnt for most.

 

http://i240.photobucket.com/albums/ff111/raguncajun/DSC02052_zps8l7spgf1.jpg

with flash on camera http://i240.photobucket.com/albums/ff111/raguncajun/DSC02053_zpslbgyxul2.jpg

 

It looks different in any type of light. I had Cascade send samples of material of colors. I will be having them do a seat cover for me to go along with my theme.

[bluebanshee98]

What color plastics will be going on this bike?

[RagunCajun]

I havent ordered yet. But the plan is OEM white. I'm probably gonna put out a want add on here and FBhq group for a white fullbore hood.

[Deadbeat]

different, you do ya colours for 1 person man and fuck everybody else

[rjdgriff]

Looks like a copper color, going to name the bike Penney?

 

 

Trail bikes, FTW

[bigweav81]

Oil field still sucks. Long story short, im finally ably to finish it. A few things back from the powder coater today. The rest i brought will be here after mardi gras. I know the colors choice isnt for most.

 

http://i240.photobucket.com/albums/ff111/raguncajun/DSC02052_zps8l7spgf1.jpg

with flash on camera http://i240.photobucket.com/albums/ff111/raguncajun/DSC02053_zpslbgyxul2.jpg

 

It looks different in any type of light. I had Cascade send samples of material of colors. I will be having them do a seat cover for me to go along with my theme.

I hear ya with the oil field. I'm a driller on a work over rig.............., and work has went to shit! Quickly.

 

sent from yo mammy house.

[trickedcarbine]

I hear ya with the oil field. I'm a driller on a work over rig.............., and work has went to shit! Quickly.

 

sent from yo mammy house.

Is it safe to assume that consumer prices will stay low enough till the little guys from America can't compete and eventually shut down, leaving the Middle East in charge of creating $4.00 a gallon gasoline again?