WINDYCITYJOHN400 Posted June 29, 2014 Report Posted June 29, 2014 better than a stock pipe lol Yes. Quote
Russell Wealthall Posted June 30, 2014 Report Posted June 30, 2014 I'm runnin pro cuircuit for trail and it'll lift 6 th gear wheelies on limestone tracks no worries only a421 with 35 mm and 26 cc domes at 4 degrees heavily mod airbox with toomeys foam filter standard gearing I'm happy with that would mind trying the drag pipes but until them it's all good Quote
Russell Wealthall Posted June 30, 2014 Report Posted June 30, 2014 Tried 24 cc domes hurt the revs Also 168 main 45 pilot Quote
possum Posted June 30, 2014 Report Posted June 30, 2014 my bike does 7th gear wheelies. Now what?? 1 Quote
rjdgriff Posted June 30, 2014 Report Posted June 30, 2014 my bike does 7th gear wheelies. Now what?? with stock pipes and +16 swinger going down hill on ice Quote
bluebanshee98 Posted June 30, 2014 Report Posted June 30, 2014 with stock pipes and +16 swinger going down hill on iceDon't forget with slicks on also Quote
DBR06Banshee10 Posted September 8, 2014 Author Report Posted September 8, 2014 So has anybody tried snipers? Sent from my iPhone using Tapatalk Quote
LaegerEliminator Posted September 8, 2014 Report Posted September 8, 2014 YesWho Dave? Sent from my DROID RAZR using Tapatalk Quote
dave5.0 Posted September 8, 2014 Report Posted September 8, 2014 We all have. You stood next to a set jabbering at Coos. Quote
ban565 Posted September 8, 2014 Report Posted September 8, 2014 We all have. You stood next to a set jabbering at Coos. Me and SKOOTER Quote
RobertR Posted September 8, 2014 Report Posted September 8, 2014 I've ran snipers on a serval both on race gas and methanol. They are a really good pipe. Quote
LaegerEliminator Posted September 8, 2014 Report Posted September 8, 2014 We all have. You stood next to a set jabbering at Coos.But, isn't the question if any one has used them on a Serval? Can you post some side view shots of yours Dave? I want to see how low they sweep down out of the exhaust spigots. The Snipers look like they don't sweep as low as most other pipes. I have clearance issues on my Laeger with the location of my nerf bar spud on the front. Me and SKOOTER I noticed them on Skoot's but not yours I guess. Sent from my DROID RAZR using Tapatalk Quote
locogato11283 Posted September 8, 2014 Report Posted September 8, 2014 So far Snipers have out-performed Shearers on every motor we have run them on. This includes a 10mm Serval and two 4mm Cubs. Here is the thread for the 4mm Cubs - http://bansheehq.com/forums/index.php?showtopic=174368&page=1 Here is the thread for the 10mm Serval - http://bansheehq.com/forums/index.php?showtopic=171645&page=1 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.