FadedDreams

I have the Duner port and its great.I would get it again if i had another motor.But like Nater said,get in touch with Dan and he'll port it however you want.You won't be disappointed.But be patient,hes kinda busy so don't expect an instant reply.

Heres the site for all you cheaters out there. San Andreas cheats

How much would the shipping be for the 6 bolt sprocket hub to Pa,15440?Soon as i save up some more,i plan on getting the axle if someone else doesn't get it first.

DirtRider was banned,then he came back under different names and ended getting those banned too.Boonman was just in chat the other night,maybe hes busy modding shiftstars and lightening flywheels.Not sure about any of the others though.

When i had Pro Circuits,i was using 280 main and 30 pilot,and i'm at 1700 ft.The mains were perfect,but i think the pilots were too big.I'd try the 27.5's first and see what you think.

I'm almost positive thats powdercoated on there.The who owns that shee was in the in powdercoat business.I'm not sure what name he went by,but if Nyuk chimes in,he'll know because that used to be one of his shees. The flames are already cut inot those pieces,he just made it stand out by powder coating them.

This would be the tool that you could use.

Heres the site RMW Billet He used to post quite a bit on here,but haven't seen him around lately.Had a nice banshee with all his parts on it.

I found my invoice from them.It was $135 for both pipes and the shipping was $25 from them.I found the email from them too.They charge $20 to $40 for the silencers depending on the size.

Here are some pics of mine right after i got them back. Heres one with them on.

I had my Rockets coated by Jet-Hot.I think it was $130 for the pipes and would have been $40 for the silencers,but i didn't get them done.Wish i would have.What kind of problems does it cause,i've been running mine for a couple months now without any problems.

I would say go for the Noss head.I had the Pro Design,and i don't know if it was me or just a flaw in the head,but the o-rings on the domes would always mess up and i would burn coolant.I would take the head apart,put new dome rings in and about 2 weeks later,same problem.The 1 piece head is a better design anyways.

I think the GYT-R just has better spark,where the Dyna has 4 different timing curves.But i might be wrong about the GYT-R.

With the Blaster pegs,it moves them down and back compared to the Banshee ones.Supposed to give you better traction and better control while jumping.I have some i've never tried either.

Thats cool how it comes up with all that stuff.I thought my elevation was alomst 1700 feet,guess i been wrong this whole time. ZIP_CODE 15440 CITY GIBBON GLADE STATE PA AREA_CODE 724 CITY_TYPE P COUNTY_NAME FAYETTE COUNTY_FIPS 051 TIME_ZONE 5 DAY_LIGHT_SAVING Y LATITUDE 39.7297 LONGITUDE -79.5912 ELEVATION 981 PERSONS_PER_HOUSEHOLD 2.60 ZIPCODE_POPULATION 333 COUNTIES_AREA 790 HOUSEHOLDS_PER_ZIPCODE 161 WHITE_POPULATION 330 BLACK_POPULATION 0 HISPANIC_POPULATION 0 INCOME_PER_HOUSEHOLD 27500 AVERAGE_HOUSE_VALUE 80100 MSA 6280 CBSA 38300

I think the RAD tapered carriers have a lifetime warrenty.But others have had problems with that company ,so its up to you if you wanna try them.

I'm worth $1,672,864.00,which is way more than i thought it would be.This could be a good way to get a raise from the boss.Tell them that how much i'm worth to this company.

I don't know if this will help,but my motor is 15:1 and has to be ran with race fuel.

I had the Bandits and was on hardtop alot,and they wear very good.They are a heavy tire,but you won't be worrying about having flats with these,very tough.I tried them in both directions,but never really noticed a difference.They do good in the snow,which surprised me.Downside is the yarehard to slide with,side lugs grip too good.

You would be very happy with the Rockets Brian.I went from Pro Circuits to Rockets and it was a big difference.I couldn't imagine if i had a drag port.They are really worth it.

It was $135 to have Rocket pipes coated from Jet-Jot.Was well worth the money.Should have gotten everything coated when i had it done,but i wasn't thinking.

I lost one on the front,so i ordered one from Yamaha,put in on and then the next day i lost the new i just put in.For some reason those front ones don't want to stay on.But thats the only one i ever lost.

I have the the 20x11x10 and they are great.Best tires i've ever ran.Fronts are 21x7x10,and they are really easy to turn with,not like some tires.The mxc are the smaller sizes,anything over 20 is the xc.Have you tred Bob at Magnolia Yamaha,thats where i got mine.

It kinda looks like just the outside part is billet.I really don't think you could have your chain sliding across that,wouldn't it hurt the chain.Guess it would add some more bling either way.