FadedDreams

505 is the dry weight.Its in the newest Dirtwheels where they test it against the Shee.

505 pounds.

Damn,i guess i'll just have to be picky who i ask to be a dealer for.I didn't realize thats how it works.

I'm in south-west Pa.I'm just getting ideas right now,gonna see how much support i get after i start emailing companies.

What type of license do I need,vendor?Where would i get one.I'll have to check around and see what info i find out.

I've been thinking about opening a place to buy aftermarket parts for bikes,quads,stuff like that.We have nothing like that around here,that i know of and i'm sure it would do good.Only other places you can get parts is the local dealership and they order the stuff when they get around to it.But what i was wondering,how do i go about getting the companys to let me sell their stuff.I know i need a license,but wasn't sure what else.

I have 2 as well.I think thats all there is.I bought my Banshee new and i'm the only one whos taken the engine out.Unless they forgot them from the factory.

When you send an email to Patriot,you get an automatic response saying that it could take up to 72 hours for in house work,and could be even longer for new,incoming work,to get a response.So he pretty much warns you how long it could take.

Heres the link. Ported Cages

I would go with the Pro Design plate and either the foam or K&N filter,its up to you.i'm not to sure about the PowerLid thing,maybe if it was cheaper it might be worth it.If your not gonna be mudding just leave the lid off and save the money for other mods.

Heck for that price you might as well go to the dealership and have them get them.

I would Ebay is gonna be your best bet,but like Schizo said,they are going for $198.00.I bought mine a year or so ago off Ebay for $180 new.I have heard too that the 3's aren't as good as the 2's.I'm alomst positive it was Tats they was talking about that.

The scalloped beadlocks from OMF do look sweet,but like any beadlock,they aren't cheap. These pics give you an idea what the scalloped wheels look like,even those these are for a truck,but they do make them for atvs. Actually,only the second pic is a scalloped wheel.But since you wanted red,it shows what it would look like.

This is the cable you need. BANSHEE: THUMB TO AFTER-MARKET Keihin Carbs (cable only) Part# M01-813 This is off Nac's Racing site,but it shold be the same part number anywhere you order. I'm not sure about your jetting though.

I have the Duner port and would get it again on another banshee if i had one.Holiday weekends are a bad time to contact Dan.Last email he said that he was extremely busy with getting eveything ready for this weekend,and that he could asnwer my questions better after that.Its just a bad time of the year,cause all the sand riders are getting work done now getting ready for the drags.Not to be a smart ass,but all the info is on his site.It explains what type of power to expect,what he recommends and the package price.

Yea,i'll find out more tomorrow hopefully.When you rebuild one of these,don't you have to get the cylinder replated.The way i understand,it runs,but not very good without a new magento.I used to have a 185s about 10 years ago and i loved that thing,i couldn't imagine something like this.I've heard they have awesome power.

I have the chance to pick up a Tecate 3 wheeler 2 stroke for next to nothing.It comes with an extra motor,not sure what shapes its in yet.And a few other parts extra.The only parts that it needs to run is a mageto,and maybe s throttle cable.Not really sure on the condition of it yet,but for the price it doesn't matter.It could make a good winter project.I would like to hear anyones input on them,good or bad.

Yea,thats the first thing i would do is grind down those stock pipe tabs or you'll be scratching up those nice pipes.But other than that,i haven't had any probelms either.

i'm down for whatever.I'm gonna be there if we have one in the fall.Even if i have to ride my banshee from here to there,i'll be there. The HQ Charity ride sounds like a good idea,if the coal company will go for it.Hopefully by then they won't mind us riding there.

I have the Rockets,but have never used CPI's,so i can't compare.But i know they were a big difference from the Pro Circuits i had on.I had a video on here,i'll have to find it and post it again. Ok,i found the clip,right click and save.Its not the best,but you can hear what they sound like. Rocket pipe video

You are rich for sure,thats what mine was doing when i was messing with my jetting.A quick way to see if that is it,take off your airbox lid to see if it runs better.Thats what got me going in the right direction.

I was thinking about picking these hubs up,but i haven't heard too much about them.In the description it says strongest hubs you can buy,but i don't know. Hubs

I remember seeing the fronts going kinda cheap on Ebay,but the guy didn't have any feedback so it could end up being just a scam.If i find the link,i'll post it.Might still be on here somewhere,not sure if it got lost or not during the upgrade. Ok i found the link to the auction,its not going as cheap as it was though. Fullbore Plastic

i have a set of 18 inch Tamers and i thought they hooked up great.Haven't even tried them since i grooved them.But i would say that if you are going to get a new set,go with Klaws.Thats what i have now and won't change unless they come out with something better.

Do both of you have the same port as Duece or are they different.Cause i could understand the disappointment if your doesn't run the same as his sounds.Must be something else going on then,cause if you have jetting right,something else must not be right.