boonman

I wasn't aware they still made those things. (Macs). Macintosh apples however, are very pleasing to my palette.......

Phew, good thing I jumped to Ford, just in the nick of time I see!!!! I still own my "pussy" Dodge truck, untill it sells at least!!!

I am located near Buffalo NY.

You should fix both sides at the same time. Likely, to repair one side, you will have to bore it. Therefore, you will ned ot bore both sides. You get jets from the dealer, or a mail order joint......

Did I read correctly that you are losing tranny fluid and smoking out of the right side? And it is bogging? ALL which are signs of a crank seal failure on the right side? And you wonder why it doesn't run right? Split the cases, and fix what needs fixin. Get ya some gasket sets, and a tube of yamabond. And a clymer manual. What airbox setup are you running? Do yo ustill have the snorkel on or something?Oh yea, if you are going to sell it, I'll come down and buy it. but it doesn't have to be that way. It is a simple fix. Something is being overlooked.

Throw it away, kick yourself in the ass, and then get a new flywheel. I would be worried about it being out of balance. I would worry about it being warped to all hell. As BD said, NEVER use a gear type puller, or a jaw type puller.

Ummmmmm, no you don't. Really, you don't..........

Is the coil grounded properly? It needs a good ground to the frame. Reeds could be also bad.... Clogged jets? Try unplugging the TORS just to eliminate that as a possibility. It doesn't take much to make the shee engine run.... fuel at the right time, properly timed spark, and compression and a pipe...

I have NEVER got on here drunk....

Stan, I have the exact same problem!!! I leave shit all over the place. But it makes the day go by, especially when you leave it 10 seconds before that, and it takes you 20 minutes to find it!! That is a sure sign of mad cow disease. pRobably one of the first symptoms. Not to scare you at all... I am really anal about my toolbox. It is God's chest.... Everything has it's place, and I get pissed when I notice a tool is out of place. I will have to snap a pic of my socket drawer(s). Friggin sick.. Wrench drawers, the same way. The only messy drawer, is the screwdriver drawer. WTF? you can't organize them things for shit. My garage is a mess. And it pisses me off every day I have to go into the shithole. People watching over m,y shoulder is the worst. I get pissed. Don't watch WTF I'm doin, worry about your own shit. I hate people that f*ck with you, and then bitch when you f*ck back. (so to speak I guess). Bitch, if you can't take the heat, get out the kitchen.....

Holy crap. You're young yet. Have a good one. And happy Birthday....

Alright. Here goes. I compulsively speed when driving. I don't know why, I am always in a hurry eeven when I'm not in a hurry. I have to pass someone, even if I go 1MPH faster. The TP thing, it rolls from the top, over to the front. not to the rear. Pisses me off, and I have to change it BEFORE I do anything else. In the shower, I always wash my left arm first. I will not sit down with my wallet in a pocket. I rarely carry it with me. My keyring has a million keys, but I only carry the particular ring I need at the time. I can't have alot of shit in my pockets at ay time. My lawn has to be perfect. Straight lines, perfectly trimmed. Striped like a baseball field. Shit has to be clean. Nothing goes on the dashboard of the truck. I can't stand shit on my face. Dirt, sweat, anything. it annoys the piss out of me. I count everything. Stairs, steps as I walk. Revolutions of the engine that it takes before it fires up. EVERYTHING I eat has to have salt on it. Pepper too most of the time. I put salt on everything. lots of it. I help people more than I help myself. Sometimes more than my family. Wife gets pissed. When skiing, My first turn is ALWAYS to the left. no matter what. When mountain biking, coasting, my left foot has to be forward. Can't do it any other way. Have to balane the checkbook, and pay bills as soon as they arrive. i tap everything out. Used to play drums, don't anymore, but my steering wheel is always getting abused.... I drink. Every day. not to get drunk, but more or less, just 1-2 beers or mixers at least every day. I have to chhange everything. NOTHING remains stock when it is in my possession. Stock is for the general public. I am not the general public...... There is mucch more, but I have to go eat, I mean drink lunch.....

I run and recommend Xtreme Haulers. 8 paddle. Flawless tire. But any paddle will be a whole shitload better than a knobby, so, whatever you can get your hands on in your pricerange would be beneficial......... I am thinking about keeping it in the states this trip, to see how much longer it is to get there as opposed to running through Canada. Last trip, I spent an hour and a half at the border, waiting to cross. That sucked.

Who says a stock she can't go 100??

You can find an easy reference in a Clymer service repair manual. Available at the dealership, or on Ebay. You need to re-jet after doing any mods dealing with the engine. (like removing the lid). in order to go back to thumb, you need the throttle housing, a new throttle cable, which is available through Motion pro, or any aftermarket place that sells banshee parts, or ebay..... You will make a slight increase in power. Either way, if you still have the stock air filter, removing the lid is a no-no. The lid keeps the filter in the box. I recommend getting a pro-flow adapter plate for the stock airbox, and getting a UNI foam air filter with an outerwear to pull filtration duties.

And if Denny Can't, I will!!! Or at least have fun trying!!!

And why not???? I'm down if she's down!!!!!

My vote is for Val-Du-Lakes campground. Camping is cheap. i will be there, just have to know the dates. DB is definitely 94, and they do check more often now. They pulled me for a DB check going in in my STOCK Super Duty Diesel. I had the shee in the back, and they never checked that, but they did check the truck . There is no camping in the dunes, well, legally that is..... But the campgrounds are not far from. There is a place to get race fuel very nearby. Alcohol, I don't know about. (the fuel, not the beverage) But, there is NO alcohol allowed in the dunes. In order to get in, you will need a $16.50 ORV pass, for each vehicle that is to go in the dunes. That means if you want to play in the truck, you will have to pay for the truck, and for the shee. You also have to pay for a daily entrance pass, which is $7 a day I believe, or a season pass, which is $29/year. There is ways around it. Especially if you have an enclosed trailer. (hint hint). I am down, as will be others. (the people that came with me to coalfest). I will likely bring the family as well.

Take it to a machine shop, unless you have some snap guages and are proficient at using them. Bore them jugs, and start fresh. You have already blown the thing twice. Also, check your jetting. Why not? Can't hurt to check it out. Also, you are going to have to make absolutely sure that you don't have any shit down in the crank. If you got some debris down there, you will soke some bearings. And that will piss you off.

you mentioning that you used two different kinds of pullers, I hope you didn't use a jaw type puller. If you did, and put ANY stress on the flywheel at all, you might as well throw it in the trash once you get it off. It is junk......

I would weld it before it goes back in if it is alright. (within spec) I have some pics, but unfortunately I can't upload them. I have to figure a few things out on that end. The specs are listed, (as you've found) and if everything checks out, I would weld it. (and true it).

Klotz super techniplate.

I don't watch baseball. I don't play baseball. (well, except to play catch with my kid.) But, Boston sucks. Not just the baseball team, but the whole city. I can't stand Boston. Paaak tha caaaaa in the yaaaad??????? WTF happened to the letter "R" in the language over there???

Holy shit!!!! You're young my man!!! No harm in bein' 35. Either way, hhapppy birthday to ya!!! Hope you have a good day!!

Here is a couple pics that may help you. It's the only ones I have... They are of a motor I just built about 2 months ago... EDIT: I cannot upload this type of file. f*ck this shit. I am sick of it. I can't get any hosting to work, and I can't upload a fuckin JPG file. This is bullshit.