shogs

As good as these guys advice is remember that every setup is different and different problems happen to every bike. Consider what it would cost to buy new jugs now, and how much it would cost to buy new jugs on top of any other damages you may do IF it does come loose or melts. Not saying you shouldn't do it it could be an easy fix, but keep that in mind.

Probably too long but I like this line when it comes to banshees Not in control till your outta control

I still need to get a picture of my banner now that I think about it, that first pic made me remember. I got a bansheehq.com sticker on my 89 caddy though. . Watching your hillclimb vids is pretty entertaining

I think its his picture that makes it that much funnier

What do you mean by the last part? A Gsxr couldn't beat a 4mill up a hill at Sand Mountain?

Loco didn't ask if you resources were unlimited he asked what they were. If resources were unlimited and money wasn't an issue I would be building a hovercraft or a giant catapult.

My family friend put some of those nerfs on my z400 and I put some on my banshee. On my z400 he had to use a breaker bar or digging bar to bend them into the right spot. With my banshee I just had my dad help me pull the longer side until it fit. Sucks your having that trouble but these pegs seem to be the hardest to install and there the most expensive

Since its probably an asphalt race and all top end like you said make sure your main is SPOT ON. I raced my friends raptor 700 and had him off the line by a long shot. Then once i got to 5-6th gear I realized I was a tad lean on the main...and he started to catch up. Money doesn't always increase speed and acceleration....sometimes all it takes is the perfect jetting.

Haha i'm gonna try my best for sure. I don't think it will be a problem though. The Washington post is a big paper here so it should turn out pretty cool. Give me some ideas of how I can sneak it in there because I think there planning on calling me sometime this week. If theres a picture included I can definitely sneak some stickers in.

Haha thanks man...I just found out today that the washington post in my area wants to do an article on me for some reason. I dont know exactly what they would ask but i guess thats another thing i shouldn't pass up lol. I'll have to fill you guys in on that when it happens. Maybe I can do a shoutout in the article

Yea I should of never asked them in the first place and just slipped it in somewhere haha. And Alf you can't even hate on kiss. I'll admit I don't listen to them much anymore but you must've been a fan at one point in your life. . Thanks for all the comments guys...I was a little worried with the way they'd make me look but the worst part ended up being when I had to make milkshakes lol. Also notice how many times my dad says my name in the last part

This is very long overdue...some people were interested in seeing the episode so i figured i'd post it. Let me know what you think I tried to upload the video so you don't have to click the link but it didn't work. Here's the link

If your saying that when you go to kick it over it won't budge then it's definitely seized. A friend of mind had that happen to his kx125 unfortunately.

what about the fact you made another account in retaliation?

Yea lol that was a joke if some of you thought it sounded believable. 2-1 is easier to tune and in my opinion hits on the bottom a tad harder. If I had a choice I would go back to duals though...just no cash flow at the moment.

Hell of a deal for 1400. Arms - 200 Axle - 100 Jugs - 250 Frame - 100 Plastics - 150 Rims/tires - 250 Pipes - 200 Just right there thats 1050 and all those prices are close to minimum of what you'd get. Was that the asking price or did you talk him down a lot? Seems to be a good find you know the bikes gonna be in good shape when the owner buys new tires before they sell it

Not much but hey someone might need it. I'll knock off 10 percent of the final price for any bhq member. 20% extra for loco or any of his friends though. Just kidding. I also have a frame and forks that are still attached to the bike. I had someone try to tell me that the seals are bad on the forks but I think he may have been trying to get me to practically give him the parts. Local pickup only on the frame and forks and i'll give a hell of a deal for them. Located in leesburg va, bout an hour from tysons or 30 minutes from winchester if that helps. http://shop.ebay.com/4swilliams/m.html

Stock shocks work better on +3+1 arms than elka dune editions do. They have to have at least 6 years of wear on them though Oh woops were talking about carbs. Well 2 into 1's work way better than any duals...20% hp gain bottom end and they pull on the top more than a drag ported cpi pipe having 35mm running bike even though mines trail ported.

I don't think the coating makes it easier to run with a shitty bore/hone job. What the other guy was saying was it just so happened to stick on him once, but other than that its fine. He claimed that they make the pistons hold up longer. I don't know of many machinists, if any that aren't capable of doing a decent bore/hone job though. Just FYI sieze is spelled seize, machinest is spelled machinist, and correctelly is spelled correctly. Spell checks the shit. Just fuckin with ya

Did your friend take the 28's as well? Theres been a lot of scamming going on lately so your gonna have to give a lot more information and recent pictures before anyone commits to buying anything from someone with 2 posts. You seem to have a nice bike that a lot of people would be interested in though. Good luck.

It would be a lot easier if you posted pictures and prices here so you don't have to answer 100 messages of people asking prices on the same part.

I mean milkshakes are the breakfast of champions...or maybe it was wheaties...

Yea i got the pt's and elkas . I had made a thread on here when I first found out they were going to come to my house. I have no idea how to upload it but I talked to my brother in law today and he's going to try to help me get it on youtube so I can post it.

He said he got some parts FOR him, not FROM him. Maybe sheerider20 bought some parts from alf, then later sold them back to alf? Alf may just have been referring to how there previous transaction went, not the current one? Just a thought. I'm sure in time everyone will know what happened but I agree alf shouldn't have to deal with this bullshit.

"drifting" on my z400 in 4th gear around a turn in an open field, flip and roll completely over myself (on my head). Luckily I had a helmet on but that is what broke my collar bone, and almost punctured my lung. All in all not bad for the worst wipeout though. I faceplanted on my brothers bruin 350 and did a front flip off my z400 after hitting a tree. My banshee is loyal, either I spin out dodge the trees lol. Not the same luck on anything else.