mikerambot

Where in Chicago are you, I got a thumb throttle for you. South loop or Naperville works for me. $20 and it's yours.

I got one too, tors cable cut off. Let me know via PM or email.

Stator and flywheel went with the engine. I have a stock CDI and two coils, one without cables needs to be tested, other with cables in good condition. Make me an offer.

camatv your parts have been shipped. Thanks!

It's Pavesi 125cc modified Swedetech. I can't wait for this crappy weather to go away!!!

You're welcome. Everything else is still on sale. Ask for stock parts that are not listed, it all needs to go.

Spark arrestor

bansheejoel thanks for making me smile I see how you got post count you whore! It's nice to see we share similar interests excluding sexual orientation. That shifter card does not belong to me, it's my friends, so is that banshee R1 atv and a raptor SV650 you will be seeing videos on youtube of. He had ported banshee engine on it pushing over 70hp but blew the crank. Cub is replacing it next week when it's back from replating. Here is my ICC cart you can drool over Windycityjohn spark arrestor is made by Toomey Racing USA and it's two to one design, costs $165 new. Let me know if interested and how much $.

If you knew how to read you would've known that the cub needs cylinder work done and it will be replacing that old shee engine found it that shifter cart for some sideways action at the track... but what would you know about that

Thanks guys for picking up some parts! Here is what I still have left, pricing flexible! Accepting offers on other small misc. parts found on the bike... Stock crank (one bad rod bearing) - $40 + S/H Stock shocks with covers - FREE + S/H Tommey T5 pipes chrome with silencers and spark arrestor (holes drilled for temp sensors, can weld) - $180 + S/H Aftermarket CDI box - $50 + S/H Extended swingarm +2 heavy duty with axle, chain, sprocket, dogbone (LoneStar) - $250 + S/H ITP pro t-9 Baja front wheels and 50% tires - $100 + S/H ITP +1 rear wheels and 40% tries - $100 + S/H Stock wheels with good tires (fronts bent, 4 rears) - $100 + S/H ASR +2 +1 Pro A-arms with stainless brake lines (used 3 times!)- $330 + S/H AC Racing Pro nerf bars - $130 + S/H Renthal bars with aftermarket clutch lever - $50 + S/H 2 sets of stock A-arms - $40 + S/H ALBA graphics plastics and seat - $150 + S/H Frame (straight, no title) - $100 + S/H front hubs with brakes (new bearings) - $100 + S/H DigaTron with 2 temp, 1 RPM sensors (broken LCD for now) - $100 + S/H Aftermarket front bumper, rear grab bar, axle skid plate - $100 + S/H E-mail: mikerambot at yahoo dot com

What about riding this bansheeR1...

PMs replied, thanks!

One more...

New cage for my cheetah cub...

Updated parts and ballpark pricing: Keihin PKW28 carbs with intakes/K&N filter/modified air box/jets/no cable - $140 + S/H Stock cylinders (one has a visible scratch) - $100 + S/H Stock crank (one bad rod bearing) - $50 + S/H Old tranny - FREE + S/H Stock shocks with covers - FREE + S/H Paul Turner Coolhead (Same as ProDesign) 21cc domes one with pitting - $100 + S/H Tommey T5 pipes with silencers and spark arrestor (holes drilled for temp sensors, can weld) - $200 + S/H Aftermarket CDI box - $50 + S/H Extended swingarm +2 with axle, chain, sprocket (looks like LoneStar) - $250 + S/H ITP pro t-9 Baja front wheels and 50% tires - $100 + S/H ITP +1 rear wheels and 40% tries - $100 + S/H Stock wheels with good tires (fronts bent, 4 rears) - $100 + S/H ASR +2 +1 Pro A-arms with brake lines - $350 + S/H AC Racing Pro nerf bars - $150 + S/H Renthal bars - $50 + S/H 2 sets of stock A-arms - $50 + S/H ALBA graphics plastics and seat - $150 + S/H Frame (no title) - $100 + S/H front hubs with brakes (new bearings) - $100 + S/H DigaTron with 2 temp, 1 RPM sensors (broken LCD for now) - $100 + S/H Aftermarket front bumper, rear grab bar, axle skid plate - $100 + S/H New dual fuel pingel - $50 + S/H E-mail: mikerambot at yahoo dot com