shogs

bump

Rear tires, hydraulic clutch, and seat sold! Everything else still up for grabs.

Yup

Bump

Bump. Everything ready to ship monday!

Parting out my banshee and getting everything off the bike and prepared for shipping. Want to get these sold this weekend so I can send them first thing monday. I have everything in the pictures ready to be packaged and shipped. FMF fatty pipes - 260 shipped Carb boots / boost bottle (yea I know)/ stock reeds - 50 shipped Grab bars - 40 shipped each Entire electrical system except the wires coming from the engine. 2gu if i'm not mistaken but i'll double check. 120 shipped. Tires - rear are its fronts are stock rims. holeshot tires with 60%ish tread. Pm me if interested. Helmet skinz. 15 shipped eached. Check there site at helmet skinz for better pictures. .20 over rebuild complete engine. Low hours. Rebuilt transmission. 1200 shipped -2 roundhouse swingarm. 350 shipped +2+1 Fullflight A-arms. 350 shipped -Steel braided brake lines. 50 shipped -2-1 Trinity Carb. 275 shipped with everything -New brake pads all around. Shoot me an offer for 2 or all 4 calipers. -Full skid plates. 100 shipped -Rebuilt kick starter (no rattle). Comes with engine -Ac racing nerf bars with nets. 180 shipped -Elka stage 1 shocks. 350 shipped. Almost new setup for 130-150 pound rider -Maier plastics. 300 shipped. Like new -Rear grab bar. 40 shipped Everything you see in the pictures is still up for sale. I will update the list when I get a chance. The hydraulic clutch, seat, and rear tires on the bike are sold, the ones pictured are still for sale. . When I say everything I mean the entire bike. Just ask if your interested.

bump. Looking for interest in the motor. .20 over cylinders with fresh top end, pro design cool head. Would like to sell as a whole for around 800 plus shipping or part them out once theres interest.

All pms returned sorry on the delay. I'm still getting prices for certain parts but almost have enough interest to start parting.

Thanks for the bump.

I am considering parting out my 2004 banshee considering the low interest in selling it complete. Everything you see in the pictures is for sale. The parts will be listed below and i'll try my best to include prices with everything. If they are high I apologize I have been out of the parts game for a little while. If you make an offer make it with shipping included, i'll do the same. All the parts listed below are mostly the upgrades but obviously everything else is available as well. I also have +3+1 arms that aren't in the pictures along with stock rims and tires in great shape. Message me with any questions whatsoever. Thanks Link to craigslist add. http://frederick.craigslist.org/for/3237860431.html -Hydraulic clutch .20 over rebuild complete engine. Low hours. Rebuilt transmission. 1200 shipped -2 roundhouse swingarm. 350 shipped -ITP Rims and holeshot tires. 400 shipped due to cost of shipping +2+1 Fullflight A-arms. 350 shipped -Steel braided brake lines. 50 shipped -2-1 Trinity Carb. 275 shipped with everything -New brake pads all around. Shoot me an offer for 2 or all 4 calipers. -FMF Fatty Pipes. 300 shipped -Full skid plates. 100 shipped -Rebuilt kick starter (no rattle). Comes with engine -Ac racing nerf bars with nets. 160 shipped -fuel filter -Elka stage 1 shocks. 350 shipped. Almost new setup for 130-150 pound rider -Maier plastics. 300 shipped. Like new -Newly installed seat cover. 60 shipped for the seat -Rear grab bar. 40 shipped -kill switch with tether for wrist. 20 shipped. I copy and pasted this from my craigslist add and I will update it when I have more time. I will not part this out until I have atleast 1500 to 2000 dollars in interest so I apologize for any delay. Like I said before I price high but if I find lower prices elsewhere I am willing to work with you so please don't come here saying I'm trying to rob anyone. Everything works flawless and I can even upload a video of the bike running if necessary. It's still together right now. Everything that I didn't list like stock parts are available as well so just ask if your interested in anything.

http://www.ebay.com/itm/330765611812?item=330765611812&viewitem=&vxp=mtr#ht_600wt_1413 Yes its my auction

-2" better description on my ebay page. Trying to get $400 shipped give or take send me a pm if your interested. http://www.ebay.com/itm/330765611812?item=330765611812&viewitem=&vxp=mtr#ht_600wt_1413

4swilliams is my ebay username but msg me I might still work out a deal on the bigger items.

Everything is now up on ebay.

I have a few different things for sale. I have not been on this site in a little while but I hope everyone understands I try to give a fair price and I ship almost immediately after payment. I have a bottom end that won't shift out of 1st or neutral. I'm under the impression that its a bent shift fork but I haven't split the cases yet. It's a 2000 and the crank still spins freely and has always been covered so no dust gets inside. It has a heavy duty clutch kit, hd springs, billet water impeller, aftermarket cover, and shift star mod. I'm asking 450 plus shipping but depending on the cost of shipping I might work with you a little on the price. -I also have a set of full flight +2+1 a-arms that are in excellent shape as well as the spindles and brakes with brand new brake pads that come with them. All you need its tie rods for the front end to be complete. $350 shipped. -Paul turner low/mid range pipes in excellent condition with the exception of one silencer is cracker a little around where the small tube connects the the big one (if that makes sense I'm sure other people have had a similar problem). Just needs some jb weld or a tig welder to fix it right up. $250 shipped -Stock a-arms that are in excellent shape with shocks. $115 shipped -Banshee boyesen Rad valve in great shape. $100 shipped not in a huge hurry to sell these. All of these parts are or best offer so don't com pain if the price is too high. They also all include shipping except the bottom end. I'd consider any trades for high end paintball markers and equipment such as nitrogen tanks, or planet eclipse markers. Even high end auto cockers would be a plus. No low end junk or any guns that cost less than 500 brand new. Mostly want cash though! Uploaded with ImageShack.us Uploaded with ImageShack.us Uploaded with ImageShack.us Uploaded with ImageShack.us Uploaded with ImageShack.us Uploaded with ImageShack.us Uploaded with ImageShack.us Uploaded with ImageShack.us Help me Sell these fast and I'll be very generous with the pricing!

I've got a set of +3+1 180 pound elka shocks on ebay along with my personal custom powdercoated green cylinders with an agg trail port, a pro design cool head, and a works rear shock setup for stock length 180 pound rider. My ebay account name is 4swilliams or the ebay listings are as follows. New Banshee elka fully adjustable +3+1 Shocks Banshee works rear shock Banshee yfz350 ported and powdercoated cylinders banshee pro design cool head with 20cc domes No reserves or starting prices.

Still for sale. 380 shipped for a-arms, spindles, and calipers. 650 shipped for the shocks.

Need these gone. 900 shipped for everything.

Come on guys I know someone needs these.

The only reason I am selling these are because I blew my bottom end of my banshee and it sat for a while then I decided to buy a built bike for a good deal instead of rebuilding mine. These parts were purchased and used for only one or two weekends before I bought the bike. As soon as I got them I decided to put my front end setup from my old banshee onto this one because it was valved for my weight and in my opinion I don't need them to be fully adjustable. No trades for now. Thanks

What you see is what you get. +3+1 Fullflight A-arms with spindles and brake calipers. All you need is the tie rods and 2 tie rod ends. I also have a set of Elka shocks set up for the +3+1 a-arms and a 185 pound rider. These are the fully adjustable shock. I'd prefer to sell everything together but if there is seperate interest in both I will part. I'm asking $400 for the A-arms, spindles, and brake calipers, and $750 for the shocks. Prices include shipping and I will sell both for $1000 shipped priority mail today only or $1100 after today. Message me if you have any questions or want my cell number to call or text me at. Uploaded with ImageShack.us Uploaded with ImageShack.us Uploaded with ImageShack.us

Forgot to add most prices are negotiable and pics will be added in the next few days.

I have an entire banshee I want to part out and everything is in working order except the bottom end. I shifted from 2-3rd too fast and when I dropped the clutch I heard gears grinding. It could be the shift fork or it could be worse. I will be adding pictures as soon as possible but want to get a list of parts so I can see if anyone is interested. -3+1 Full Flight A-arms (charcoal) These were purchased new less than 10 rides ago. Everything but tie rods included. The tie rod ends will be included. 350 -Elka Full Adjustable front shocks valved for 3+1 and 175pounds. 750 -Stock length round house swingarm with carrier. In good shape. 400 -.20 over aggressive trail ported stock stroke cylinders. Powdercoated neon green. Need to be bored or honed. Don't want to get rid of these so the price is 450 firm. Ported by herrjugsracing -Bottom end that won't shift out of first. Crank spins freely. New clutch discs, pancake bearing, billet impellar, adjustable timing plate, new stator and flywheel. 700 plus shipping. 100$ give or take. -I have 2 single 35mm carb kits. Not just the carbs the entire kit from reeds to filter. Asking $225 a piece or both for $375 -95 swingarm in good shape - make offer -95 a-arms completely rebuilt good to go. Never used since rebuilt. - 100 I have the frame and the rest of the parts for sale but don't want to sell unless you make an offer with shipping included. I also have a 2003 kx125 frame, front forks and clamps, gas tank and seat I will sell dirt cheap. I also have a bottom end that got water logged and is stuck and most likely rusted, however the clutch, parts, and stator are in great shape. Will work out a deal if you can pick it up. I live in Northern Va and will give fair shipping prices. My names cody and call 703-297-5964 if you have any questions or you can just message me. I can send pictures by phone today if anyone needs pictures quick.

I have a 2-1, +4 timing, paul turner mids, and an aggressive trail port and I love it. Regardless of the fact that i could gain hp with 2 carbs i still love it. Its lightswitch power though...no wheelies . I like it for woods riding because if i need to i can drop the clutch in any gear and have tons and tons and tons of power at any given time. Thats just my opinion though. (who knows, if i dropped the same amount of $$ in my z400 i might prefer that) its all about preference and what makes you happy, for your personal situation and style of riding.

Haven't been on here for a while since I haven't been riding much with the cold weather. Now thats its nice again I started to ride my banshee and completely forgot what happened to me around Christmas time. Me and my uncle installed a new clutch and springs and when I was tightening the drain plug on my bottom end I stripped it. We thought that some loctite might do the trick and it did, until a few days ago. I was wondering what my options are. I was thinking of either trying locktite again after I let the fluid drain completely out and getting the threads completely dry or maybe throwing a little weld on it (just a little tack to keep it secure). Let me know what you guys think is the easiest solution.