Tedder

PM back at ya for an address...Have a shaft and all three forks

I'm pretty sure I can fix you up with decent serviceable parts that I won't run in my drag bike. Send me a pm and let me check when I get home but say $10.00 plus the shipping.

Sent a pm on the new V-2's but got no response...Are they gone?

I'll give you the asking price for the new V-2's PM sent

Be very carefull anytime there's a possibility of mixing regular with synthetic oils. I was to cheap to throw out my old race fuel and weed eater gas before the start of a new seson and decided to burn it in my lawn tractor. Ended up with the WHOLE fuel system full of little tiny "jelly" beads. It was a nightmare to get cleaned out.

I've had 3 of Jeff's baskets in my 1/4 mile asphalt bikes. They've held up perfectly. Great units and a bargin price!

No - You do not use the cushions in the FAST clutch.

230 mains - You sure your not way rich at WOT

For sure Jeffs (FAST RACING) Magnum baskets are a great buy. Heres an HQ link of some recent basket comments. http://bansheehq.com/forums/index.php?showtopic=133868&view=&hl=&fromsearch=1

I've used Jeff's baskets on 3 asphalt motors. None ever showed any wear and never had a failure.

SOLD - Pending payment

Pics-Click on to enlarge

Absolutely like new condition RDZ OOF Drag pipes One out each side Small bore / Small flange Used on asphalt only Less than 4 hours total run time on them *Ceramic coated* $375.00 shipped within the lower 48 Add $10.00 if Paypal

Stinger $375.00 shipped I just got them but turns out they're big bore and I need small. I'll get my own pics for anyone interested but if your a Planet Sand member so you can see pictures the whole post of where I purchased them is in the for sale section. http://www.planetsand.com/forums/ubbthreads.php/topics/1040327#Post1040327

Got a very nice set of Shearer one out each side small flange big bores for sale. PM me if interested.

These guy's are absolutly right, Detonation will rattle the plugs loose. Been there done that with both my alcohol bikes. 99.99% of the time it's a lean condition. Fair warning - Fix it or you'll break it for sure.

Assuming the process was done correctly it's still a little rich but remember the WOT run only tells you that the main curcuit is correct. If it were mine and it pulled hard from bottom to the top I'd probably drop one more jet and run it there for a while.

LOL - Most of you guys are younger than my kids. I'm 52 from Northeastern Ohio.

The pressure plate can be put on in a way that it doesn't drop down over the clutch pack. There is a punched mark on the inner clutch boss and an arrow mark on the pressure plate. Make sure you have them lined up correctly.

$20.00 "gift" sent I almost sent you a pm before posting up in the wanted section! Thanks

Like it say's - Looking for a bunch of GOOD stock clutch springs. Don't want to spend a ton of money but let me know what you have. Thanks

Lots of opinions on the best way to tackle jetting. Heres my .02 Although I haven't done a plug chop in years I did when learning and would recommend it for any first timer with little or no tuning experience. Start by reading all the info you can find on the subject. Plenty of good info right here on the HQ. Once done you'll feel pretty comfortable with the whole process before even firing up the bike. Look for others with comparable setups and altitudes to get you in the ball park then do a few plug chops. Done correctly you can nail the mains pretty quick then work your way down through the other curcuits with "the seat of your pants" Good luck

We use Digitrons on our asphalt bikes. Great tool but it's not something you throw on and use exclusively to tune your bike. Do that and I'll guarantee a crappy running bike or toasted motor. Search on this site about jetting recommendations from other members with similar setups to yours and on doing a proper plug chop.

Thanks for clearing that up for me Brad - Those pics don't look anything like I remember. The additional material on the sides will be a nice improvement. Could one of the new units be purchased without the cutout in the grill area? Ted

I have a single 19CC Pro Design dome if you can find someone else with one. LMK