BigRed350x

Yes. Stock cylinders are often over-looked and under-estimated. I'd go the triple port stocker route. But all depends on the porting.

I had a couple people asking about my black bike so I put it back in my sig. lol I have to photoshop the white bike out though, since "theshee" owns that one now. I miss that bike. It was a fun little stock-stroke. - Jared

Bummer man! Hope to see that cheetah cheetah soon!

I've got a set of 39 PWK pumper carbs and a mikuni pump I would sell ya if you can't trade for what you are looking for. - Jared

Sent ya a PM.

I have a couple sets of paddles and a couple sets of carbs. I'm looking for a set of Small Bore in-frame or out-of-frame (doesn't matter which one) CPI's or shearers. I have a set of 22x11x8 10paddle extremes on black-label rims. Also have a set of 22x11x10 10 paddle haulers on douglas rims. I have a set of 35 PWK alky carbs, a set of 39mm keihin pumper carbs with the pump. Need a set of pipes. Don't care if they are in-frame or out-of-frame as long as they are small bore. CPI or Shearer. - Jared

A price would help...

We will be there the 14th thru the 16th.

You better make it out!! haha! Didn't take you long to find this post. Was hoping you would reply. You know I will be calling you for weather updates the week before we head out... :biggrin:

My buddy Calvin and I will be heading down to sand mountain the 14th thru the 16th. We will probably have all 5 of our bikes with us. Hopefully we can see some of you down there! I'm hoping to get some fast runs up the mountain on my new 10mil Twister. All of this is weather permitting of course. - Jared

I had dave at noss machine make me some custom domes for my black bike with these ideas in mind. It was a bit of a pain to get it tuned to where it wouldn't detonate at the lower rpm range under a load out on the dunes, but once I figured that out its amazing how my setup runs with some domes that I had him cut quite a bit different than normal squish domes. Experiment around and try stuff in real life. Its interesting what you will find runs good compared to what books will tell you runs good or doesn't. Most people who heard what my squish was and how it was shaped told me it wouldn't work. Turns out it works pretty dang good, and with almost 0 degrees timing advance. :biggrin: - Jared http://s70.photobucket.com/albums/i94/powe...llshooting2.flv Running rich, it still pulls plenty hard with the setup I have.

My buddy Calvin and I will be heading down to sand mountain the 14th thru the 16th. We will probably have all 5 of our bikes with us. Hopefully we can see some of you down there! I'm hoping to get some fast runs up the mountain on my new 10mil Twister. All of this is weather permitting of course. - Jared

A price would help... I have those same bowls on my black bike. Good stuff. Bump!

Bump! Carbs still available!

It will be running at the planet sand drag races in NV this november. Check out planetsand's website and see if you can get the days off and you can ride down with me. - Jared

No. Extensive welding will be necessisary. I suggest totally melting them down and re-casting them in this case. :biggrin:

$1500 anyone? All polished. K&T Drag port. New pistons...

I will vouch for him as well. He's an awesome guy and does some good work. I wouldn't hesitate to send some cylinders to him if you are looking for some port work. - Jared

We will have to teach you on the override... and order you some iron ankle protectors. haha! Rick wants to do a sand mountain trip in nov. want to come? - Jared

I'll make you a deal on a K&T drag ported 10mil Trex top end... - Jared

I already have 38's 39's 40's and 41.5's... Thanks though. Just looking to sell them outright. - Jared

I removed the over-flow tube from the inside of the bowls so I could use the factory barb on the outside as the supply line for the powerjets. The insides have been milled down to ensure the powerjet gets enough fuel.

How about $1700 ?? Anyone? - Jared

I can get pics tomarrow evening after work... I'm selling them because I don't really have anything I can run them on now. I run 38's on my duner, 41.5's on the K&T Trex and the Twister bike, and the cbr600rr raptor uses FCR's. I sold / traded any of the bikes I would run these on. I also have about 6 other sets of carbs...

$285 Shipped! Would go great on a stock stroke - 4mil duner / drag bike.