jtraptor660

Radiator, front shaws, chassis, wiring harness with dyna cdi, chariot tensioner all still available. Also have a stock ba.shee seat and tank with dual pingel.

Rear shaw sold.

Sorry if I don't reply to this quickly. I posted my number because I'm not on here much anymore.

Swinger, chain, and throttle are gone. Marvins are 15" fronts and 16" rear

No idea on trail riding. I prolly wouldnt use them.for that. I think i replied to everyone. Throttle and plastic are gone

+ shipping on all items

This is whats left of the partout. Custom built chassis with aarms and stem....1500.00 obo Arched +10 swinger with flame carrier holder...350.00obo Boss oversized radiator...225.00obo Marvin shaw shocks, all 3 for 300.00 obo Black full bore plastic rear are drag cut...350.00obo Chain for a +10 swinger...50.00 Aftermarket thumb throttle...35.00 Chariot chain guide...30.00 Call/txt/pm for more info and pics. 623-341-3516. Willing to do some trading. Im into rc cars and softball bats

send me ur email or number abd i will send some over.

5500. Still here

dang. it doesnt. well i have some pics on my phone. http://forums.atvdragracers.com/topic/9147-10mm-drag-build/ try this link

10mm cub fully drag ported by D&M here in AZ 68mm cylinders 1-5 over ride n in the middle crank works crank OOF shearers 39mm alky khiens billet bowls +10 proformance prototypes arched swinger jj&a drag axle with billet housing billet side cover lock up spindle mounts on smoothies drag cut rear with 22x11x8 12sls's marvin shaws fill bore plastic, black oversized radiator. The chassis i got off of wannaplay from here and got shafted it can be read in the resolution section. since ive had the front end and the motor mounts redone by metal tech here in AZ. its a +4 in the front from what i can tell. Aarm set up. I traded my 450 for the motor. was told it had 119-121hp in stock chassis. dont know a whole lot of internals other than ive put probably give or take 30 passes on it and it was new other then dyno time when i got it. frame was powdered green but have since had some work done to chassis and needs another powder job. the aarms steering stem and swinger are a dark metallic green and powder looks good on them. NO TITLE as the frame was a custom build but i can generate a bill of sale. un sure what these are goin for today but im hoping to get no less then 6k for it. not wanting to ship so locally only (AZ/CA/NM/NV) and as of yet im not sure if i would part it out unless i got decent offers on the motor and chassis. i have pics on my phone and if you would like some please txt me at 623-341-3516 or email me at itsmejojo12@hotmail.com as im not on here often. i am getting out of drag racing and wanting to get a family toy. rhinos or sandrails. would be open to trades for some kind of family toy. rail rollers. i found this link of my build pics. http://forums.atvdra...0mm-drag-build/ some things are bit diff. i have more updated pics.

10mm cub fully drag ported by D&M here in AZ 68mm cylinders crank works crank OOF shearers 39mm alky khiens billet bowls +10 proformance prototypes arched swinger jj&a drag axle with billet housing billet side cover lock up spindle mounts on smoothies drag cut rear with 22x11x8 12sls's marvin shaws fill bore plastic, black oversized radiator. The chassis i got off of wannaplay from here and got shafted it can be read in the resolution section. since ive had the front end and the motor mounts redone by metal tech here in AZ. its a +4 in the front from what i can tell. Aarm set up. I traded my 450 for the motor. was told it had 119-121hp in stock chassis. dont know a whole lot of internals other than ive put probably give or take 30 passes on it and it was new other then dyno time when i got it. frame was powdered green but have since had some work done to chassis and needs another powder job. the aarms steering stem and swinger are a dark metallic green and powder looks good on them. NO TITLE as the frame was a custom build but i can generate a bill of sale. un sure what these are goin for today but im hoping to get no less then 6k for it. not wanting to ship so locally only (AZ/CA/NM/NV) and as of yet im not sure if i would part it out unless i got decent offers on the motor and chassis. i have pics on my phone and if you would like some please txt me at 623-341-3516 or email me at itsmejojo12@hotmail.com as im not on here often. i am getting out of drag racing and wanting to get a family toy. rhinos or sandrails. would be open to trades for some kind of family toy. rail rollers. i found this link of my build pics. http://forums.atvdra...0mm-drag-build/ some things are bit diff. i have more updated pics.

I have a 1-5 wcr over ride drag tranny. No more then 10 passes....325.00 shipped A set of yamaha douglas blue label rims, 10inch fronts 8" rears. Powdered orange. The orange on fronts and rear are slightly diff colors. 85.00 plus shipping. Twist throttle with cable for 35mm khiens... 45.00 shipped Lightly used hd clutch fibers and plates...40.00 shipped Gold pro taper handle bars. Bigger clamp needed. 50.00 shipped Stock raptor 700 exhaust header and all...50.00 plus shippong yfz seat. Cover is personalized with a name but cover is in great shape...50.00 plus shipping yfz six pack rack. Mounting holes are wobbled out but otherwise in great shape. No mounting harware or brackets, 35.00 plus shipping OBO on all items pm me or txt me for details/pics 623-341-3516 Mite do some trading. I would like a set of painted black glass for the front and rear of my drag bike.

Nope still owes me. Havnt heard from him in prolly a year or more.

Ok i looked them over real good after some interest. The front and rear rims look to be powdered a diff orange Rears are darker then the front. The paddles look not to be skat trak but skat trax hauler. Never noticed that when i bought them. I will reflect differences in the price.