Jump to content

FadedDreams

Members
  • Posts

    558
  • Joined

  • Last visited

Everything posted by FadedDreams

  1. I've got some Pro Circuits on Ebay right now,going cheap. Pro Circuits for Sale
  2. Same here ,the red marks on mine are all spread out.Really didn't notice until i had it together,but i've been running mine for about a year without any problems.
  3. I've seen the Wolf ignition in Dennis Kirk.Its not cheap and you would probably be better off getting the Dyna ignition if you want to get anything.
  4. I agree with everyone.I bought his pipes and as soon as he got the money i had the pipes 2 days later.No worries from him at all.
  5. Here are a few parts i have on Ebay. Ebay Stuff
  6. I have the taper bored 30mm,but i'm not sure what kind of gain they gave me cause i put them on at the same time i got ported.
  7. How much you want for the flywheel puller.
  8. Got any pics of the pipes.
  9. I've had some trouble with my Pro Design head,but haven't really heard too many others have problems.But if your going to get one,i would get a Noss head.Also Lefty,do you really have a RKT head,if so,how do you like it.
  10. I'll start at $150.Thats cool how it opens from the top like that.
  11. I had a problem with the TM Designworks pipe clamps on Pro Circuit pipes.When i did get them on the pipes,they would leak and then when i tried to put them back on the o-rings would get pushed out.I also had the problem with the Motion Pro spring puller,but it broke just as i got the last one on.But i like a tool to last more than 10 minutes at a time.
  12. I used Super Techniplate ever since i bought my Shee up until i got it ported with no problems.And the only reason i changed is because the builder said it burns dirty compared to oil without Castor in it.But i still run Klotz,just now its fully synthetic.
  13. I have rear wheels with a wide off-set.They are ITP .190,they only had the tires mounted to them because the wheels were too wide for the tires.I'll sell them for $80 if your interested.
  14. I know DG will sell just the brackets,but you have to call them and ask for them,its not on their site.I was gonna buy a set for mine but i left the plate off this year,and never got around to it.
  15. 23 front and 22 rear is what i have been running and its great for trails.And you might not even need to drop a tooth on your sprocket,i would try it first and see how you like it.I didn't,but the only complaint i had was with my choice of tires,i had Bandits and they aren't very good to slide with.But the fronts are great.
  16. I have Pro Circuits and the Dune port from Patriot Racing,and it runs great.If i wouldn't be rich on my jetting it would be even better.Flat out hauls.
  17. I was going nuts because after workj i always check out the HQ,and i was terrified when it wasn't there
  18. The new site was worth the wait.Its sweet,but its gonna take some time to get used to it
  19. I have a set i'll sell.I bought them to use with a set of Klaws,but didn't realize how wide the wheels were.I can post some pics sometime later if you want.They are brand new,only had the tires mounted on them,never ran.
  20. . Have you had a problem when hitting water? no 2. Did it bog or rev? neither 3. Do you have stock carbs? yes 4. Do they have the tors still on top? yes 5. What year is your banshee? 2001 I had pro circuit pipes,v-force reeds,cool head,and pro flow plate with k&n.I've went through water that have been over the footpegs,splashing on the engine.I could ride in the rain or with moisture in the air. Now I have 28pwk's bored to 30 and so far haven't had a problem with them other than jetting.
  21. Its like everyone says ,just research who you want to do it and what you want to have done.Just ask alot of questions,I know when I was wanting to learn from Dan at Patriot Racing ,If I wasn't so far away he would have come to my house and choked me.But he took the time to answer every question I had,no matter matter how dumb they were to him. But if you want a quick answer,Yes get it ported.You will love it.
  22. I just added my stuff up and I got $8950 in mine.I never realized I had that much into it,but I guess the machine itself was almost $5800.
  23. I remember seeing somewhere that just for a 500 kit,it was around $4000 for that.So I'm sure this guy has alot of money tied up in that thing.Especially with all the chrome.Definitly is bad ass though.
  24. I'm like DUNE-A-TIC,they both have their place,but I would like to have a lowrider.Where I live people have their beat down Fords with a lift and huge tires that cost them more than the actually truck.
  25. I'll be 20 on May 26.
×
×
  • Create New...