HangingTough

I have a 87 Shee, looking for a -1 swingarm. Anybody has one or knows where I can get one, please let me know

Plugs look o.k. 1 rich, 1 lean. I will check on that oring and see what is happening. It was torn at one time but I thought I fixed it but maybe I tore it again. Thanks I'll check

I checked the plugs and it looks like one cylinder is running rich and one is running llean. Also how does one plug around the white part , be carmal and the other half be black. Not sure how to fix that

Can't fiqure out why shee is running so hot. I have a Cool Head with 21cc domes, 20 fin Inline cooler in the hose to the head. Yet the Fluid starts boiling after 20 mins of riding. The little hose on top of head just starts freaking out after shut down with boiling fluid going threw it. Also have Antifreeze coming down two studs of bottom of engine. Comes down studs in a good flow to. Its the 2 studs that are really close together in the middle underneath. Not sure why thought. Need Help getting frustrated

I have Trinity 2-1 35mm carb setup and was running 162 Main, Just installed G3 Reeds with 12mm spacer not sure what to rejet main to. And or do you have to do pilot and needle. Anybody no what main to use, or can suggest something. Are you supposed to go up in Main or Down. The guy at dirracing sent me 190, 200, and 210 but didn't sound like he was sure what he was talking about. Now I have fuel coming out bottom of bottom nipple on carb when I rev Up. Please help

Got 2 problems and need help. I put 70w-90 Amsoil in Crankcase and now all of a sudden fluid is coming out two studs ( the ones right behind the drain hole that are really close together) constantly on the bottom of my engine. Not sure why or what to do....Also put new G3 reeds with the spacer in today and up Main Jet to 190 and now I have fuel coming out the bottom of the carb. I think its that overflow nipple. But never had this problem with fuel spraying out when I revv up on the throttle need Help

Thanks guys, it is a 20 fin so I hope it works

How do these inline super coolers work? And where do they go? Do you just cut a line and then clamp it in or what?

I prefer G3 Power Curve Reeds form dirracing. From what I have been told, I'm sure somebody will correct me if I am wrong. Reed spacers placed after the reeds give you more Low End, and I have seen people place reed spacers before the reeds for topend.

Thanks mine should be here in 2 days. Why so much influence on the needle kit?

Got a question with 6th. When I am in or out of the powerband when I shift to 6th I lose everything. I doesn't die but i doesn't grab more RPMS it just kind of settles. Don't know if I need to go further down of my main or what. I am already at 162. I have Trinity 2-1 so its a little easier to jet. Help

Got a question when I hit 6th in or out of the powerband I lose everything. I doesn't die but it doesn't keep reaching in RPMS it just kind of slows and settles. Wondering whats up with 6th

The T6's are more for stock banshees, depending on your aftermarket I would go with the FMF's, I am going with the FMF SST just because I want the low end for jumping. I have heard great things about the Toomey Top ends thought.

Hey you guys heard anything about these reeds. Seems like a really good deal with dir racing. Just wanted to get the low down if you've heard anything

No but keep us informed!