Jump to content

wayne_smith97

HQ Premium Member
 View Profile  See their activity

  • Posts

    2,121

  • Joined

  • Last visited

  • Days Won

    6

 Content Type 

Everything posted by wayne_smith97

  1. wayne_smith97
    New clutch kit and and 30 dollar msr lever and you would be surprised how easy the pull is. Also get a new cable
  2. wayne_smith97
    Good info, thanks
  3. wayne_smith97
    Is there a way to detect the O2 sensor fouling before holing a piston?
  4. wayne_smith97
    Oh boy
  5. wayne_smith97
    I have the skull and top hat form jd. Everywhere where I ride, people compliment the grille.
  6. wayne_smith97
    https://jackson.craigslist.org/snw/4952930993.html Just seen this on CL. I hate when shit like this happens. Keep your eyes open and your shit locked up!
  7. wayne_smith97
    Seen that several times. If he'd drop it to 35 it would sell.
  8. wayne_smith97
    Good to know, I may try to push mine a little higher.
  9. wayne_smith97
    I agree with old skool. Just wait. It may be only 6lbs but I personally believe that it could push it out if not cured. (Though I have no proof it will)
  10. wayne_smith97
    Just get you a clymers manual and follow it to a "T". Best of luck to you.
  11. wayne_smith97
    That's fair considering that the cases have to be split and I would have to drive from west tenn to Wisconsin.
  12. wayne_smith97
    I tried to buy it at what I felt was a good price considering me having to drive to Wisconsin to pick it up. He still wants nearly 3k for it. That's why I said good luck
  13. wayne_smith97
    Read post I made a few post back. A qualified machinist will give you this answer
  14. wayne_smith97
    Good luck
  15. wayne_smith97
    Just trying to flip it quick
  16. wayne_smith97
    Take the cylinders to a machine shop they can tell you whether they need a bore or just a hone. 64mm is stock
  17. wayne_smith97
    Get a second gage and recheck. If the same reading shows up, do a leak down to determine if there is a leak. Then rebuild
  18. wayne_smith97
    That's fine
  19. wayne_smith97
    5108 planer drive milan, tn 38358. Ask for Wayne. Come collect your money
  20. wayne_smith97
    Make sure your floats are set at 21mm
  21. wayne_smith97
    Clean carbs and leak down test before you even start it again. Could just be the carbs are out of sync, but you should do these things listed above as a safety precaution
  22. wayne_smith97
    Did I miss where he said what fuel he is running and what compression he's at? If your running pump gas the +4 is good. If your on alky you can up it to 7 or 8 maybe more
  23. wayne_smith97
    I can't speak for alba. Never had any work done by them.
  24. wayne_smith97
    Are you running pump or alky
  25. wayne_smith97
    My donation to the cause is read and research. A billet dipstick is real cheap. Also how can a plastic dipstick screw up case threads

BHQ Quick Links

×
×
  • Create New...