Jump to content

Sandking

Members
 View Profile  See their activity

  • Posts

    1,197

  • Joined

  • Last visited

  • Days Won

    1

 Content Type 

Everything posted by Sandking

  1. Sandking
    I could be wrong but the Trinity boot is set up for a 35mm Carb. If the 38 fits you could make it work.
  2. Sandking
    Another quality place for billet and anything else custom check out risdesigns.
  3. Sandking
    Nice six grand, good luck.
  4. Sandking
    Contact Risdesigns they do custom painted quads all the time. They have an internet cite.
  5. Sandking
    Sometimes they don't close all the way due to dirt or sand. Just tap the side of the carb.
  6. Sandking
    I just built the same set up with 35s Kevin recommended 50 pilot 158 main and cell needles
  7. Sandking
    One of the floats may need to be adjusted. Give the carbs a few good taps on the sides may fix the problem.
  8. Sandking
    Thanks guys that's what I'm looking for.
  9. Sandking
    Could someone advise me on how I can locate and buy a couple of these brackets. I tried Torque-Racing but their cite doesn't work and there not on ebay. I've thrown away the coolant bottle so I don't need the JD Customs one which is a bit expensive anyways ($45)
  10. Sandking

    How much would it cost for two banshee relocation brackets without coolant bottles. Your cite doesn't work on my cell 951 333 3357. Picture of it also. Thanks.

  11. Sandking
    It will fit the axle but not a banshee rim. It has s different bolt pattern.
  12. Sandking
    OEM Is the only one you can count on.
  13. Sandking
    Just get the bike ported and advance timing +4. Without theporting your going to get spanked
  14. Sandking
    Thanks I figured I would need the compression tool
  15. Sandking
    Can I remove the rear spring by loosening the top bolts with a spanner wrench or do I need a tool to compress the spring.
  16. Sandking
    I just put one on in chrome. Its worth the money and a good mod. Fit was perfect.
  17. Sandking
    The rear shocks not bad. You can have it revalved and a stiffer spring put in if you go with an extended swingarm.
  18. Sandking
    I had issues on the low end but after many dollars it turned out to be the after market stator. TRY the stock one with a modded bike.
  19. Sandking
    Sorry that's for the clutch actuator rubbing. For the throttle it should be an easy pull.
  20. Sandking
    They shouldn't have a heavy pull, check to see if the left side carb plug at the bottom of the bowl is rubbing on actuator. You may have to put spacers btw cylinder and reeds.
  21. Sandking
    Thanks
  22. Sandking
    Which Permatex are we supposed to use for the cases. I didn't see the 1211 at Autozone. They did have the gray stuff.
  23. Sandking
    Skate trak 8 paddle haulers work great
  24. Sandking
    Do you have to do any tran mods for the 4mill or will the stock Trans work
  25. Sandking
    I'm going to get an aggressive dune port by Hjr and figgured it'll be an extra grand for a 4mill. I already have v force 2s and dual 35s and didn't know if its worth the money. I'm 100% duner in glamis

BHQ Quick Links

×
×
  • Create New...