Jump to content

Sandking

Members
 View Profile  See their activity

  • Posts

    1,197

  • Joined

  • Last visited

  • Days Won

    1

 Content Type 

Everything posted by Sandking

  1. Sandking
    Sounds like you need to replace your needle valve which plugs the hole when the floats rise.
  2. Sandking
    Good luck selling those I think everyone on this forum has or had a set lying around in their garage until they found their way into the trash.
  3. Sandking
    Sounds like a great set up and its ported by a great guy.
  4. Sandking
    If you want to advance the timing get a timing plate for lick 50$, if you get the key and its not properly installed it can sheer off and break. Check up on the mods section its been discussed many times and there's detailed instructions on installation.
  5. Sandking
    T-5 let Kevin know so he ports for your pipe.
  6. Sandking
    Remove the carbs , flip them over and remove the float bowls. The floats are the black circular plastic pieces that move up and down. Flip the Carb back over and measure the distance from the base of the Carb to the base of where the float comes to rest. Should be 20-22mm.
  7. Sandking
    WHITE frames always look good now finish it up and get it dirty or sandy
  8. Sandking
    Check your float heights they should be 20-22mm from the float mating surface without seal to base of float. On stock Carb.
  9. Sandking
    Porting=power........HJRRacing can hook you up. He's a cite sponsor.
  10. Sandking
    dont do it just get extended a arms made for a banshee. a few have done it and switched to a banshee made extended a arm which should tell you something.
  11. Sandking
    ELKAS are great but if you ride recreationally you don't need resi's on the fronts. Either a arm option would work and look and feel better than stock. Long travel isn't necessary for a limited budget.
  12. Sandking
    Go into the mod section and do a search for "wiring" there you will find what your looking for
  13. Sandking
    Contact K&T since they ported it they can give you a good starting point.
  14. Sandking
    Everything about your bike is low- mid if you want a little more top end gear higher.
  15. Sandking
    Just unplug them but double check that the pilot and main jets are clean
  16. Sandking
    How much for front works shocks?
  17. Sandking
    Clean the carbs again and specifically the pilot and main jets
  18. Sandking
    X2 for a FAST clutch
  19. Sandking
    Just remove the pin and nut at the bottom of steering arm and see if the spacer is there.
  20. Sandking
    I warned you.
  21. Sandking
    You might try eBay guys here aren't fans of the boost bottle.
  22. Sandking
    Sounds like your missing the spacer that goes BTW the small portion of the base of the steering shaft and bottom seal. It can fall out during removal of the shaft.
  23. Sandking
    X2
  24. Sandking
    There's one on the left front and right rear on my bikes
  25. Sandking
    The Ris guys are awesome I've camped with them a few times. They'll even work with you on prices once your a repeat customer.

BHQ Quick Links

×
×
  • Create New...