Darthwall

I have some stock fronts that I could let go for 35 shipped

where are you located

its all the money you want to spend as you can see sleeves and cubs are close together if it is a set of non ported cylinders I would go with cubs just for the price difference but for trail/MX and really want that power go with big bore stockers. its all trail riding or drag/dune?

they really are people! construction of these are awesome work great all around

send some detailed pics to [email protected]

I have some cpi oof drag pipes and in new condition and some K&N pods w outer wears pm if interested

I have the carbs with no TORS and cable no air box K&N pods with outerwears

great guy to deal with thanks

Yep that is what I am running nice bars they hold up really well to abuse previous owner of my bike got them his 11 year old was riding it around he jumped it and couldnt figure out how to bring it back down flat! He brought it down but on its side bent a spindle and some plastic brackets but the bars where 100%

I will say it I have used octane booster and have made some good power! the ones I like are REAL LEAD and NOS off road, fuel additives. the REAL LEAD is supposto be the same stuff they put in race fuel to make the fuel high octane the more OZ,s per gallon you put in the higher the octane works preatty good I think you can go up to 118 octane? And the NOS stuff is supposto have NITRO mixed in it if you get the OFF ROAD formula. I have tried the Lucas stuff before and was not impresive to me at all! its all trial and error google REAL LEAD and give it a try

I think if your jetting is ok and your leakdown test is ok I would definatly get a different set of pipes I went from a stock motor to a 4mm drag ported stock cylinder with 34PJ,s and had LRD adjustables on at first set for top end I had a small gain on power but after not riding it in 6 months didnt think much of it lol I got a set of CPI oof,s put them on and WOW its a hell of a difference front tires are off the ground through 4th now

no I think your talking about a overflow it skimmes the top of the water into your filters or sump depending on your water turnover you can get one of those for 50-100 bucks the calcium reactor stabelizes your calcium level, PH and ALK

I dont know how much they will charge I think I heard this off of gunbroker too I know last year I was looking for a nice HMR 17 and lots of dealers said they could ship to local gun shops/sporting goods stores ive shipped ammo no problem but guns might be alil different

I dont know how much they will charge I think I heard this off of gunbroker too I know last year I was looking for a nice HMR 17 and lots of dealers said they could ship to local gun shops/sporting goods stores ive shipped ammo no problem but guns might be alil different

I think you have to contact a sporting goods store and ship it to them they are able to deal with stuff like that

http://cgi.ebay.com/ebaymotors/YAMAHA-BANS...1QQcmdZViewItem Check them out good deal for someone

how much do you want for the +2 stainless lines

ya this sounds good just make sure to fill in all those little scratches with either coats of primer or some glazing putty wet sand smooth with 400-600 grit whipe it down with alky and tack cloth and shoot it take your time it will be worth it I just did my white plastics last week spent around 12 hours start to finish

WOW! those must make like 100 horse power lol

ya my bad I wasnt paying attention you dont need a calcium reactor for a cichlid tank this is for keeping corals mostly SPS

same deal its just a different head they can be made. for the price comparison I would look on ebay and find a set of ported cylinders you can normally get them with a nice port job and pistons for around 300 bucks! Do your cylinders you are running now have BB sleeves in them? if not then that is the last bore you can go and I would try and get a couple of bucks out of them before you have to resleeve or just have a set of paper weights lol

up up and away

pm sent awhile ago lol

bump for some nice lookin pipes hope you sell them it seams like everyone that was interested in mine wants me to give them away lol

Pm sent on tank