Mickz30

Hey guys,My banshee's front passenger wheel sits al bent and when u drive on the road,it sometimes lifts off the ground too. My rim has i small dent on it,but wouldnt think that this is the problem. Also my banshee has yfz450 shocks in the front.and when u lift the bike up at the front the driverside wheel is on the ground and the passenger wheel is lifted up a couple of inches. Would my banshee need lining or any new parts up front that are worn. Has any1 else had this froblem when they installed yfz450 shocks??????????????????? Many thanks Micky

Hey guys,My banshee's front passenger wheel sits al bent and when u drive on the road,it sometimes lifts off the ground too. My rim has i small dent on it,but wouldnt think that this is the problem. Also my banshee has yfz450 shocks in the front.and when u lift the bike up at the front the driverside wheel is on the ground and the passenger wheel is lifted up a couple of inches. Would my banshee need lining or any new parts up front that are worn. Has any1 else had this froblem when they installed yfz450 shocks??????????????????? Many thanks Micky

I dont know much about them, They came of my banshee that was supermoto equipped,, I took them off as they where too low for motocross and trail riding They are purple with REIGER wrote on them And when they where on the shee it was about 4 inches of the ground when u sat on her

Yip finally got it lol My swinger had an adjustable link on it,but i couldnt see it when i was looking at it as it was hidden up inside the swinger lol! Thanks for all your help

As above have a full set a reiger lowering shocks for banshee. Would trade them for aftermarket front shocks to suit motocross?? pm me

As above not bent or any major dings or scrapes.Blue netting on them. Im in Ireland an would post anywhere as long as buyer pays for the ride!! $75 plus shipping!

Il get some up tomorrow of the rear shock an dogbone,,Thanks alot guys

I think my dogbone has a longer than stock arm on it!Which makes it sit lower? By me saying arm i mean the bit that bolts onto the swingarm guys Anyone ever see one like this

No shock nat blown,my dogbone linkage has a longer arm that bolts into the swingarm, Which i think is making it sit lower,any of u guys ever see one of these linkages with the longer than stock arm? Oh an by me saying arm i mean the bit that bolts to the swinger!

To start of with i took the 3 reiger lowering shocks off the shee. Then put YFZ 450 shocks up front and stock shock in the rear. My Banshee now sits like a chopper when i sit on it lol Would there be any mods in the rear of the shee to keep her low to the ground at the rear,even with the stock shock in? Can anyone tell me if there is anything that would keep the shee low at the rear?And what it looks like? Im Puzzled Many thanks

Now that u mention that about a lowering link,my dogbone link sits really really low to the ground. Can u buy lowering dogbone links? Maybe this is my problem,mine sits roughly 2-3 inches from the ground when i sit on the shee? Many thanks

What kind of shock,can you get the stock shock set up? And are the front a arms expensive to buy? Do you know what size stock a arms are,so i can measure mine to see if they are stock or after market! I havent a clue lol

Hi,well im setting my banshee up for motocross an trail riding,i have yfz450 front shocks an a stock rear shock,but when i put the front shocks on an the rear stock shock in my shee now sits like a chopper!LOL My bike was set up for supermoto racing when i bought it, I know very little about setting up the bike lol I measured my rear swinger an its 16-17 inches long,is this a stock swinger or is it bigger or shorter than stock? And what would cause my banshee to sit like this? I thought maybe th swinger!?!?!?!? Can any1 help me asap as im running out of patience lol! Thanks alot guys

Hi,well im setting my banshee up for motocross an trail riding,i have yfz450 front shocks an a stock rear shock,but when i put the front shocks on an the rear stock shock in my shee now sits like a chopper!LOL My bike was set up for supermoto racing when i bought it, I know very little about setting up the bike lol I measured my rear swinger an its 16-17 inches long,is this a stock swinger or is it bigger or shorter than stock? Can any1 help me asap as im running out of patience

Hey my swinger is 16 or 17 inches long,could anyone tell me is this +2 +4 or what, i dont have a clue lol!! What size is stock swingers an would they be beter for trail riding that my 16 or 17 inch one? Many thanks in advance