Darthwall

adjust the tops of the cable adjusters to where the slides line up with each other see how far they go open after that as long as they still close all the way adjust the throttle adjuster so that the slides move as soon as you touch the throttle or not gepending on how the feel is

at your local PPG store they have a spray can type of bumper striper im not 100% on this but it is supposeto work really well as long as you follow the directions I havent used it on plastics but have used it on the poly bumpers on cars you spray a heavy coat on and let it sit for a little while then you can scrape it off just a sugestion look into it before you do it the people at the store should be able to answere all your questions

you should just be able to go down to the local hardware store and get some zirks they are on tons of things so they shouldnt be too hard to find just bring your arm with you ya kinda sucks but if you dont know the thread type what else can you do and if you go to yamaha more than likely they are going to charge you the price of 1 compared to all 4 at a hardware store lol atleast the yamaha dealer over here does

I think its pointless to ask anymore the guy said he would send pics to me like 4 or 5 days ago and never did so he must of backed out

good seller fast shipping recieved the items in excelent shape and it only took a day to get here thanks

great seller got what I paid for as described in great shape and fast shipping

http://img152.imageshack.us/img152/9872/img8822.jpg http://img21.imageshack.us/img21/7349/img8821.jpg

I normally use turtle was chrome polish and it takes off rust too its probably alil less effective but works really good with some time put into it

tires are really nice not alot of wear I have had them out for maybe 30 minutes at the most they are 9 paddles had them for about a year and still inflated rims nice shape need to be polished. but I am looking for the same tire in at least an 11 paddle 12 prefered but I will look at all offers or will consider for a +8 or +10 swingarm and if the deal is right I might add cash to the deal

another boost bottle gone

and up again

well can you send me pics of the hubs like I asked a day ago!

that is exactly what I was curious about seems like it wont be to big of a list to do. how long are those tips they look like they are around 3" or so?

no that head is not part of the deal that thing alone was about as much as Im asking for the whole setup and bore is on 66mm and could use a light hone but doesnt need it

325 anyone?

thanks bill great guy to deal with glad those worked out for you hope to do buisness again thanks

I'm over in yakima Wa just curious if you ever want to get rid of those plastics im interested

just need a decent priced pump that works off vacuum

where are you lacated at?

PM sent

im interested in the sproket hub and brake hub if you will split it all up

I am not a wiz on stock carbs but drop the mains down 5-10 and try again! most likely 10 and see where you are at if it is still a wet look go down more

Ok here are some pipe pics for ya price is up for offers but take into consideration that these went for 700+ and are really comparable to t5's but you can adjust the low and top end on them and just wanted to add that these are not beat up old pipes they have some use but there is only two small rub marks on them from the head and the left silencer has been repaired where the factory weld broke great shape and constuction these are tough mother f*cker mo doubt about it. also considering trades on swingers

all pms returned

what elavation are you at? and carbs are you running? also what mains are you running along with pipes