Washburn

See the thing I dont like about that is that stuff can really throw your tires off whack. Theres no substitute for the balls it would take alot of slime to have the insurance of the balls unless you made the best of both world with slimy balls

Hey, they were pretty nice balls Dave. If I ever see you at Silver Lake I will show you my colored balls. I know youll want to squese em :biggrin:

Heh, you should se the PMs he sends me :biggrin: Here you go Dave http://tireballs.com/atv.html

They are uninformed and they think the only was is their way. Thats the only sence I can make out of people like that. No matter what you tell them they are always rite so its a waste of your breath. You have 2 ears and one mouth for a reason.

Ha, yeah I seen that. How much is a case of them if you know? What department do you find them in at wal mart. I should already of asked these questions but I was really thrown off when I seen them in there. All colorfull and shit Yeah spongebob I dont know if it was him that said that or someone on here. Ide opt for aqua teen hunger force myself. Ide even pay extra :biggrin:

Who runs Tire Balls? I seen my mechanic Cody Buchanan's tires off of his bike and I seen em in there. He told me what they were for and I said thats cool man get me some. He said its not a purchase he just made he saved for them. I said so just get them for me and he told me the price 7hun is a little much. Then I seen him take a coustomers tire off and he had colored balls in there I asked WTF. Are they some sort of off brand crazy looking Tire Balls he said no there wal mart balls. Said they help with flats. Has anyone ever tried either of these. Im buying some wal mart balls to see how they work.

Jay, Ive seen people get 4mil agressive woods setups and still stay on the stock carbs so they can keep all of that lowend. Yes they are bottleing up the overall power and not poping the cap with 28s or 30s but they do take ayawy. I would suguest keeping the carbs you have or getting them bored out to 28mm and saving some money unless you plan on getting some heavy duty porting and if thats the case your going to be concentration on keeping the rpms down enough so that you can corner properly. Thats just my oppion though.

Yeah 300 a month sucks but Ide rather that then the whole thing at once you know what I mean. I used to own my own roofing buisness and insurance sucked but I still made. Then I got hurt and couldent hustle shingles up a latter anymore so Im back in school. Im still not sure what I want to major in but Im paying as I go. I found out if you count on something and it falls through its better to not owe any money because backup plans for shit like that dont exist. Its better to pay your way as you go instead of relying on future income cause life can throw some hard ass curve balls at you. That I cant stress enough but people do what they do. Its true it all will work out in the end no matter what but always be responcibe for what your doing while your doing it. My sister dident know this was comming at all. She just meesed up her loan somehow. She does NOT want to take my money so Im paying for it in her name. Its complicated. Hell her Boyfriend is the head chef and genaral manager at Lidias resturant in Pittsburgh. Real high class joint. He offered and she wont take his money either. Even on a loan. Ha shit If I was a good looking girl Ide be on that. But I understand and respect her decisions very much. Shes a good girl and she will be a Lawyer one day. I should charge her plus intrest :yelrotflmao:

So I save up for months for my Elka Elites and rear linkage and A-arms. I buy my A-arms with the intention of buying my shocks but I needed like 250 more for all of the rear stuff so I told my guy to hold off untill I get the money. Thank GOD I did that. Anyway my sister just graduated from Paralegal school with intentions of going to Law school. We arent rich far from it so she took out student loans. Her school just told her the day she graduated "You dont get a diploma without giving us 4k for your student loand". WTF Isent the whole point of taking out loans for school so that you can graduate GET A JOB then pay them off? BASTERDS! Looks like another 5 or 6 months so I can save up all over again for my suspention. In the meantime I will have my A-Arms -1 or 2 swingarm with roundhouse carrier and a scoots steering stabilizer. Dont mean jack without suspention though. Oh well what can you do. Time goes on. Thanks for listening to me bitch :verymad:

Are you useing that Mobil 1 in your Banshee? Ive heard bad things about that oil for ATVs. Not good for the clutch. Great car oil though.

Holeshots are and always will be my favorite tire. The Razr 2s will outlast them by far and they are very comprable witch is why Im buying a set cause I run through tires like water. If I had the money Ide buy the XCRs all around. I already have them on the front.

Thanks 3 :thumbsup: Im not even going to atempt that. Ive never so much as Held a welder and I need it to be extra extra strong. Im sending it to Loco. I know what you mean about snaping axles. I snapped 2 in the same riding location in one months time on 2 diffrent bikes. Never hurt a swingarm though. I guess my guy has a powdercoater lined up cause he has his stuff PCed and Ive seen coustomers bikes in his shop PCed but if its more than 100 for the swingarm forget about it. Ill use bondo and spraypaint. Ive never had anything PCed,

Overall Quads 2007 Series Series Place Points Rider City, State Rider Number R1 R2 R3 R4 R5 R6 R7 R8 R9 R10 Numbers 1 984 Rice, Jermey 199 199 98 98 99 98 98 0 95 0 1 2 947 Pickens, Jeff 198 192 97 0 97 95 0 99 100 69 2 3 947 Shadron, Denny 194 195 91 0 0 94 89 96 90 98 3 4 929 Rusch, Ron 186 193 0 87 93 92 91 0 97 90 4 5 929 Shankel, Bradley 187 190 0 94 89 90 92 95 92 0 5 6 924 Sommers, Brandon 197 200 99 99 98 43 90 0 98 0 6 7 893 Buchanan, Cody 179 180 0 0 87 81 87 92 94 93 7 Yeah, thats him. This is what I will be doing as soon as I get my Banshee together. Cody always used to beat me in races but when Im all setup and I get him to do my 4mil I will stand a way better chance. Plus I practice More. Where are you from Blaster668?

Ive never seen them ran on anything. Ive heard of a few people on the internet with them on their yfzs. If you cant tell the diffrence between a works shock and a shock thats suposto be top of the line the price tag says that anyway then they are either valved and setup horribly wrong and you still should be able to feel a diffrence or they are not that good. Look into them ALOT before you but them. Ideal is to find a few people who have ran them and a diffrent set of shocks.

Ide get a Noss head w 21cc domes and a ricky stator timing plate and set it at +4 if you want to run pump gas (Depending on elevation). that will give you alot more lowend and more power throughout the powerband. Then save up another hundred or so and buy the V3s. Or if your looking for the best powergain for you money get your head milled and get it ported. What kind of pipes do you have? What style of riding do you do? Where are you located and what elevation do you ride at?

I am going to take a link out and put a half link in and adjust it so its -1 for now then when I get my suspention I will have an extra swingarm cut -2. Problem is I dont have a roundhouse carrier and I dont want to Dog Walk. My LT250R used to do that all of the time and I couldent stand it. I searched for about a half hour. Do you remember the title of the thread or any phrases that the search might pick up. I dont want to hasstle you to type it all over again. I do appricate any help you give me thats for sure. I figure why not cut my stocker for a few hundred less than a brand name. Im not one to pay for things so my quad looks like the badest machine out there I need it to preform as the baddest machine out there for as little as I can get away with spending. Thank you, Neil

I wonder what they are going to do to the one they messed up? 2 guesses ya only need one. Morons, I bet it was looked at as no big deal they are all probably laughing and one guy comes in the back and says thats ok I usualy clean out air filters by sticking them in the bikes gas tank to save money. I expect nothing less from our fine Yamaha dealers.

What is involved in choping 2" off of a stock swingarm? How strong is it when it is welded back together? How much did you guys that had it done pay?

Indianapolis VS CHICAGO W-L-T Indianapolis 15-4-0 Chicago 15-3-0 I would like to see the Bears win but I would like to see Manning get a ring and Dungy win one My pick Indianapolis Colts

33 pwks and T5s would be an excalant setup IMO. I would still call Jeff and see what he has to say about that though. After all he did the port work.

I did a search and I see the handel bars up for everyone to view but the grab bar still isent in the search. Guess it will be when I get off of work tomorow. Thanks guys :thumbsup:

I want people to hit the search button for LT250R and be able to see my items so they can bid on them is what I was saying.

Pics of the swingarms. Price? [email protected]

pacificcoasttoys.net Was a link givin. If not Im sure you can find him by contacting the guy HELLBILLYl on page 3 http://www.on-dunes.com/forums/viewmessage...&topic=1052 A Trick I always use is if Im looking for a specific company I cant find just by typing the company name in is always put what they speicalize in after the name. FI google Fireball Racing ATV

Yeah that sure does SUCK. Thank you for responding so quick. I appricate it.