Bansh-eman

I am going to be out of town this weekend. I will not be home until late on Monday. If you have any questions or want a part, send me an email. gcworth@gmail.com I will not have intrnet to check the site so I will have to hope my phone gets signal way out in the sticks to use my email.

Here is an update on what all is left. Like before it is broken down into the two sections. Motor: Polished K&T Drag Ported Cub and Blaster Pistons 1000 Blue Chariot Head w/ alky domes (I think they are 18cc) 125 Cascade Billet stator cover 175 Boss Billet Intake (38-41mm) 100 41mm Packard Lectrons w/ Billet Bowls 500 Stock Flywheel 75 Nology custom braket 20 Kicker gear with spring 25 65l per hour Black Mikuni fuel pump 25 mount to bolt it unde your tank 10 Ported for 421 cub case halfs, Powder coating has seen better days 175 Stock coil 20 Stock CDI from a 2000 - 50 Flywheel puller 10 Chain braker tool 20 Spring puller tool 5 Used clucth cable 20 Used Throttle Cable TORs removed 20 Regina Gold Non ORing Chain fits +12 - 100 Roller: Lightened 2000 Frame Powder Coated Candy Blue with clear title 400 Custom Painted Stock Plastics 400 Seat With Custom Cover 75 Chrome Mod Quad Stem +2 - 100 Chrome Fireball Racing Super Light Drag A Arms and Spindles 500 10x4 Boss Spindle Mounts with Super Lite Buffs 21in - 450 Chrome Stock Pegs 40 Chrome SLC Customs +12 Ladder Bar Linkage Swinger with Boss Brake Plate and Chain Slider 500 JJ&A Hillshooter Axle with 40mm BOSS Carrier and tools 550 Drag cut douglas rears with superlite haulers 350 Candy Blue Linkage 25 Candy Blue Rear Caliper With Block Off Plate 70 Rear Brake Disk 20 Trail Tech Lights 80 Cascade Tail Light Bracket 10

Chain Tensioner and PODS w/ Outterwares SOLD!!!

Shearer OOF Pipes and Nology SOLD!!!

Chrome Rear Brake Lever SOLD!!!

Nylon A Arm Bushings

Stock Gas Tank With Billet Tusk Cap And Dual Pingle Chrome Motor Mounts Upper and Lower SS Brake Line for +12 and Blue Anodized Clamp Chrome Stock Rear Brake Master With Resi and Billet Cap Rear Grab Bar All SOLD!!!

Marvin Shaws SOLD!!!

Todd sent me a message on them first. Let me wait and see if he wants them and I will get back to you. You got a pm Alf for right now I am going to leave it on the tank, I will get back with you if no one wants all of it.

Todd sent me a message on them first. Let me wait and see if he wants them and I will get back to you. You got a pm Alf for right now I am going to leave it on the tank, I will get back with you if no one wants all of it.

Todd, I just sent you a pm on ATVDR

No thanks.

TAG bars SOLD!!!

Thumb Throttle SOLD!!!

ASV Lever SOLD

I am starting a new clean thread to finish the partout of the motor, and now I have added the rest of the parts from the roller to be parted out. Please referr to the link below for the new post. http://bansheehq.com/forums/index.php?showtopic=127588 Admins please lock this thread.

Ok Guys I am parting the Roller out now. I still have items left from the motor part out so I am going to break everything down into two different sections. As with the other stuff all prices are plus shipping and any fees. If your paypal has a verified bank account you can gift the money to me and not have to pay fees, otherwise you will be required to pick the paypal fees. If there is anything that you need that isn’t listed please PM me to see if I have it. Link to some picts are below. If you want some more picts send me a pm and I will do my best to snap some for you. http://img689.imageshack.us/g/dsc01575ql.jpg/ Motor Part out: Polished K&T Drag Ported Cub and Blaster Pistons 1000 Blue Chariot Head w/ alky domes (I think they are 18cc) 125 Cascade Billet stator cover 175 Boss Billet Intake (38-41mm) 100 41mm Packard Lectrons w/ Billet Bowls 500 Shear OOF Drag Pipes (Same Side Left) 425 Stock Flywheel 75 Nology custom braket 20 Kicker gear with spring 25 65l per hour Black Mikuni fuel pump 25 mount to bolt it unde your tank 10 Ported for 421 cub case halfs, Powder coating has seen better days 175 Stock coil 20 Stock CDI from a 2000 50 Nylon A Arm Bushings 10 Flywheel puller 10 Chain braker tool 20 Spring puller tool 5 Used clucth cable 20 Used Throttle Cable TORs removed 20 PODS w/ Outterwares 30 Regina Gold Non ORing Chain fits +12 100 Chrome Rear Brake Lever 30 Roller Partout: Lightened 2000 Frame Powder Coated Candy Blue with clear title 400 Custom Painted Stock Plastics 400 Seat With Custom Cover 75 Stock Gas Tank With Billet Tusk Cap And Dual Pingle 125 Chrome Mod Quad Stem +2 100 asv lever 25 Chrome Fireball Racing Super Light Drag A Arms and Spindles 500 10x4 Boss Spindle Mounts with Super Lite Buffs 21in 450 Marvin Shaws Comps (all 3) 300 Chrome Stock Pegs 40 Chrome Motor Mounts Upper and Lower 75 Chain Tensioner 20 Chrome SLC Customs +12 Ladder Bar Linkage Swinger with Boss Brake Plate and Chain Slider 500 JJ&A Hillshooter Axle with 40mm BOSS Carrier and tools 550 Drag cut douglas rears with superlite haulers 350 SS Brake Line for +12 and Blue Anodized Clamp 25 Candy Blue Linkage 25 Chrome Stock Rear Brake Master With Resi and Billet Cap 40 Candy Blue Rear Caliper With Block Off Plate 70 Rear Brake Disk 20 TAG Bars 20 Chrome Stock Thumb Throttle With Extended Billet Lever 40 Trail Tech Lights 80 Rear Grab Bar 30 Cascade Tail Light Bracket 10

I got a set I will be selling soon. However they are already painted. http://bansheehq.com/forums/index.php?showtopic=122103&st=0

Stator, Timing plate, and Clymers SOLD

I forgot to mentin that I have two sets of Quick Disconnects and a purge bottle setup for sale. 35 plus shipping and fees. I do not want to seperate any of it, As it is setup to have on set n the bike, one female end on the purge bottle, and the extra male end on a peice of Tyvec hose incase you need to drain your fuel tank.

Not sure how fast your needing it, but I got a +12 Chrome SLC Customs Ladder bar that I am trying to sell with my roller. If I can not get bites on the whole roller I am going to part the roller and sell the parts. asking 525 plus shipping and fees for the swinger. Will ome with slider and Boss brake plate. Oh and its a likeage setup swinger.

The screws will not safely come loose from the stator and timing plate, therefore I am going to sell them only as a pair. 120 for the Billet timing plate and 200 watt RS Stator.

OK. So here are the parts that I still have. Keep in mind this does not include the parts off the roller, as I am trying to sell it first and if I can't then I will part it at a later date. As before all prices are PLUS shipping, and if you want to use paypal add 3% for fees. Polished 421 cub Drag Ported by K&T and Blaster Pistons - 1000 (Sold pending money order) Blue Chariot Head w/ alky domes (I think they are 18cc) - 125 (Sold Pending money order) RS 200w Stator - 100 I also have a Billet Timing plate I will sell for an additional 20 Cascade Billet stator cover - 175 Nology Coil w/Hotwires - 125 (Sold pending money order) Boss Billet Intake (38-41mm) - 100 41mm Pumper Packard Lectrons HV's w/ Billet Bowls - 500 Shearer OOF Drag Pipes SB no silencers (Same Side Left) (Sold pending money order) Stock Flywheel - 75 Nology custom braket - 20 Allows your Nology coil to hang in stock location Kicker gear with spring - 25 65l per hour Black Mikuni fuel pump - 25 Have a mount to bolt it unde your tank for 10 Ported for 421 cub case halfs, Powder coating has seen better days - 175 Stock coil (I got this off ebay 2 years ago and never used it, I don't know if it is good or not but I was told it was) - 20 Stock CDI from a 2000(I got this off ebay 2 years ago and never used it, I don't know if it is good or not but I was told it was) - 50 Nylon A Arm Bushings - 10 Clymers - 15 Flywheel puller - 10 Chain braker tool - 20 Spring puller tool - 5 Used clucth cable - 20 Used Throttle Cable TORs removed - 20 PODS w/ Outterwares (small holes from rubbing in outter wares) - 30 Regina Gold Non ORing Chain fits +12 - 100 Chrome Rear Brake Lever - 30

Give me a little time and I am going to type out a new list of everything that is left, plus some of the stuff I didn't put on the first list. Remember this is just the motor and other smaller items. I still have the whole roller. If I can not sell it, then I will part it out in the near future.

Crank and Lockup w/ cover SOLD!!!