trex banshee

Whoops I meant to say GREAT not greay. sorry about that Chase and thanks again.

I bought some stuff from him and it arrived really fast. Thanks again Chase!

I am looking for a +6 swinger and it must be the round housing carrier design I would also prefer it to be chrome but doesn't have to be and for it to include the carrier but again doesn't have to be included. Thanks

how much for the lightened flywheel??

ok cool, is there anything else you would consider trading it for or is shocks all you need?

well I mean where the spring will go through, the big part of the swinger, it should be something like 3 to 4 inches. Can you measure that spot?

How wide is it where the shock is going to go through?

I am not seeing any pics????????????

I used to watch it but I quit cause it is all just bullshit! I mean why don't they use lights???? It would be soo much better like this one race i seen they said a guy jumped so they had to watch the replay and watch that dumbass bald guys hands to see if he left early. And the lengths that is bullshit too cause if it is a good track the track will be completely different 4 or 5 lengths ahead of where you are supposed to start, and for the finish they go off the guys naked eye which can be really hard to determine in a close race. And lastly the guy who runs it is a dumbass I don't think he as a clue what he is talking about. One more thing I don't like the whole headstart thing anyways the whole show is about racing for pinks so that means the racers are telling the other guy their shit is faster, right??????? well then run heads up you pussy or shut your fucking mouth. I could go on and on but I would like to hear what someone else thinks!

well i am not sure on stock carbs but I don't know why it would be any different but on mine Andy at GRR drilled and tapped in a new main on the outside of the carb towards the top that acts as another main when you are at full throttle so you can get that much more needed fuel. (cause alcohol burns so much faster). he also drilled out my 142 mains to a .098 thousands hole and put in alot bigger needle(not sure of the kind), THen i had to run a pingel valve to allow that much more fuel flow and lastly drill my gas tank cap vent hole as big as it would go and take out all the little stuff inside of it for better fuel flow. I know you said proffessional and i am far from that so you could just give Andy a call and he will fill you in on everything.

what bore is the top end on that you are wanting to trade?

I have had nothing but good from it since i changed over to it. I always ran HP2 and loved it but it does not mix with alcohol so I had to switch, and Andy at GRR told me to run the 927 and I did with no complaints.

Well that is a good looking bike except for the front plastics. and also you aren't going to get any where close to 10k for it. Not doggin it, it's just not gonna happen.

Yeh I am sure that will be right in his price range!

You are complaining about using a tank of gas in one day! Try going to alcohol tank of gas lasts about 20-30 minutes depending on how you ride it. Just kidding with ya but yeh your jetting does sound way off, better get her figured out before she goes!

Do I sense a possible trade????? If so I got what you need.

Its good to hear you may be getting it back. My neighbors recently had all their shit stolen too! But no luck in finding them but I did get a lead from a guy who said all them were in butler missouri. They steal them and sell them for drugs! But theirs got stolen about a month ago so they are probably already gone. Everything that got stolen was a 1998 banshee, 2002 400ex (yellow),XR 100 (white and red) not sure of the year. 2004 Blaster (white and red), 2005 Crf 250 (red) and their enclosed trailer (charcoal color) siingle axle bumper hitch. If you hear of any of this when you find yours (hopefully you will) shoot me a PM. thanks

Damn. Wish I lived closer!

Whoops! Sorry bout that Jeff

I had the same problem. Oh well all is good now!

If that don't go through PM Jeff at fast racing his name on here is F.A.S.T racing.

I do now! but it aint for sale.

Ok I thought I had heard of some 120mm in some situations. thanks.

What is the longest rod you could get on a 10mm stoker crank? Is it 115mm or do they sell 120mm rods????

you want the 4 mill stroker with 5mm long rods or just the 4 mil stroker with stock rod length?