87sheerips

check parking brake assmbly/plug

Use Bondtyte 1104, call the guy on my signature and hell hook u up. Supposedly better than yamabond considering it doesnt break down as easily. I just sealed my cases with it and it is great, i think he sells it for like 15 bucks . He uses it on all his methanol drag banshees so im sure its great stuff.

I just bought my first bottle ofengine ice, who has had experience with it, what are the benefits, or faults of it??

what up, well after this rebuild im flat broke, but i just found out my rear pads are shot, im lookin for the best deal out there, please help!!!

88 banshee that was a pit bike. clean as hell, all original. all stock. Got stolen after I rebuilt it while I was injured, now I have an 87

I bought a sun star sprocket from a kid on here for 18 bucks with the hub, good deal but the sprocket is bent!!! what the hell! so yea just an example, gotta be careful even with th e banshee bros??? bullshit

what 2 of the 3 factory wires do i use to hook up the new foglights??

cool, well I have no rear light so I should be fine i hope?

My buddy and I just fabricated some headlight brackets (which are bad ass) out of stainless steel, etc. Ive seen this done before, but I figured id ask to be sure. Can I run regular 12v car foglights (small KC's) with my stock electrical setup (stator, etc) Let me know cuz I really want to use em!, ohh and what 2 out of the 3 stock wires will I use to hook em up??

My 87 is bored .100 over, wiseco has the stuff for it. If you want new cylenders, call the guy on my signature and he can hook you up with a REALY good price. Tell him JD from MI sent you. But yea, the .100 over is great, so if u can do that it would be the cheapes way for ya.

Anyone know if its possible to do in michigan??? ive been trying to find out forever!!, if its possible thats the first thing on my list

I bought my 87 for 1400, and it is bad ass, just doing a rebuild for cosmetic value, look on autotrader and yull find a cheap one. Just do a thorough inspection (compression testing, seals, bolts and fasteners, drive train setup,) just look it over real good, and of course test drive it. I talked this kid down from 2200 when i brought my compression tester, kind of intimidates some sellers. Give it a try let me know what u find.

Hey there, just wondering if carb cleaner would be safe on my raidiator hoses, along with some steel wool to get em clean. I just finished cleaning my jugs with it, so im wondering if i can just continue onto the hoses, any advise would be great, thanks a lot

ill be there labor day weekend for sure, the bansh will be all done for sure, and broke in. let me know where yur stayin that weekend banshdog, if yur goin that is

Did u get the part????

hell yea, I was plowed last night at like 4am on here, Lota beer pong and natty light!!!!!! goota love the natty!

I have no ripping in the pedals, but the rubber boot that is still attached to the carb has two triangle boots on eack side. I am running keihin PWK 35mm carbs. I have some minor abrasion on ONE of them on ONE side. Doesnt efect reed pedals at all, but was concerned with possible leaking. The machine ran reat before I took it apart, and because of money imthinking about leaving it for now. Tell me what u think.

ta ta ta ting ting tank tank ting ting ta ting ting yea yea toomeys baby

get a 4 stroke

Ok, might be a stupid question but I dont know much about reed valves. When I was taking apart my reed assembly today, I noticed that one of the boots (the triangular black rubber that goes into carb) I think its the boot at least. One out of the two triangles on one side has a little tear on the edge. It ran great before i took it apart. Should I replace it? Sorry about the confusion but any help or lesson on reeds, boots, and cages would be great, thanks

Mine are 66.675 mm, whats my bore size?>

Hey there, I have an 87 banshee, got the jugs out and want to paint most likely red. Whats the best way I should go about prepping and painting these bad boys. About Bore size, im reading 66.675 mm on each cylender. Is this .100 over?? My mechanic is thinking that its not .100 over, but im pretty sure it is. Please give me some advice!! thanks a lot.

Hey man, im tellin you, call james at the banshee connection, he has numerous banshees that he constantly rotates and parts out. he should have one for a couple bucks. He has so much shit.

Call the Man That i have posted under this. Yur problem will be solved. Tell him what U need, tell Him I sent ya and u should be all set for pretty cheap, even if u DO have to get a hub. do not go to the stealership, this guy is the shit!!

Hell yea, thanks for the info, Ill most likely be draggin sept 19, since my shee is under construction, im only an hour and a half away. its Great to find this out instead of driving 3 and a half to the dunes!!