87sheerips

Sent u a PM Jason!!!!

As far as Ive seen, the 404 is a JOKE!! I smoked a 404 with DMC 916s, with my stock jugs, .100 over, non ported with FMFs. Somethings not right there. This 404 was dialed in too. It ran good, but id stick with porting your stock cylinders!!

so why dont you set the price for a smooth shifter tranny?? Id prolly send mine off to ya, and im sure most of the HQ would too!

sweet, cant wait to see you blow out some bikes/sleds out there. there seems to be some hot heads that come out to white lake, you see that?? anyway, i guess im guna keep these fmfs unless I run into some cheap T5s or CPIs. Hell, maybe even shearers if the price is right. Let me know if u run into any deals, especially around SE MI. Later,....................... JD

Sorry, i didnt read all the posts, but it sounds to me like u need a new swinger pivot shaft or bearings. This was happening to me when I popped the clutch, and the swinger was moving, allowing the chain to loosen up and slip a little bit. Put a new pivot shaft in and it fixed it. Jack your bike up uner the motor, and try to wiggle your swinger side to side. it shoule be tight

true that, I already tweaked my subframe with the stock grab bar on! Ill figure somethin out here, still let me know if any of u have a bar for sale, thanks for the comments!!!!

Just like the title says, Ive had this stuff for a while, just seein if anybody wants to trade sumthin for it. let me know, thanks. '

Like the title says, these seats are new, besides being used in the 2005 detroit auto show. My buddy gave them to me as a trade, and am not going to use them anymore. They are located in SE Michigan. Let me know what u want to trade, or shoot me an offer if you want them! thanks!

No shit, and ive kinsa been doing more drag racing lately. Hmm, i think im guna have to save my pennies and get some. But I traded some older T5s for these pipes since they are chrome. I hardly noticed any difference... although I did have the T5s on this bike before it was ported. Do I not know what im missing?? Ohh and im running a 15/41 gear right now, helped this bike a lot on the top end..

Ive been waiting for a good thread on this topic..... I have an agressive dune/trail port with 20cc domes, and 28mm keihins that pulls hard on pump gas, even with the FMF gold series I have on right now. Ive been wanting to switch up pipes, but how much will I gain in the drags or lose on the trails?? My top end seems to rip, i smoked a HRC kitted 450r up top, by at least 4 or 5 bikes. I also ride a lot of trails, mostly in the U.P which are long and fast. I cant complain about the FMFs, but want to see if im missing out on significant power gains. Daj.. you mentioned a 2-5hp gain with shearers or CPI, u think I should just keep the FMFs if they are performing? I guess you will see this winter on white lake (if we get a winter that is).... Thanks,, JD

Ive run gearsaver 80w, 7th gear tranny oil (85w), 10w40 4 stroke mtotr oil, now I just put in amsoil 10w40-hopefullly it works good. Pretty much any name brand oil will be good. I switched to 10w40 for the winter to keep it from thickening up. Run what you can buy at the damn store IMO!!!

yep, Thats what I think im guna do, make a smooth ass grab bar, maybe weld it to the frame and grind everything smooth, I bet that would look sharp!

yea, and backing the nuts should be fine for installing them. Just be careful not to over torque and start strippin shit!

hahha u see that right side head pipe all smashed to fuck! id like to hear the crash story!

TTT :woot:

true, i do want aftermarket of some sort. I guess beggers cant be choosers!!

hahahahah true, true :beer:

No freakin grab bars??

Got a nice 97, search for "trail beast" in the for sale section. I need 2g's for it! I live in SE MI, in Highland PM me if you are interested!

I like my TUSK HD clutch. cant beat it for 35 bucks

When my CDI was taking a shit, it would die at high RPM's under load. If you can try out a buddies, try that. Or buy one for 50 bucks on here to keep as a spare none the less.!

Just realized I need a new grab bar. Let me know if you have somethin nince, not OEM. Thanks!! :beer:

BUMP... Someone needs to trail ride!

TRUE, but banshees are no longer made, and I think its sweet to keep rockin the j-arms. Yea they are weaker and ride harder, but cheap and fairly easy to find and replace. Plus you can bend them back on the trail if you bend one!! haha Just my opinion :thumbsup: