uscgflorida

I am running hole shot h d's, the compression and cluch is fine. only like 5 hours on the quad. it is nice and smooth through the whole power band. I think I will change the gearring. I think im just spinning to much. hes pulling on me in the upper rpm's. I went one tooth down in the frunt because i ride alot of tight trails. so ill go back to stock gearing and race him and see if i do better.

Also have v force 3 reeds

Ok I raced my buddy that has an 06 yfz 450 with just a pipe and he is spanking me everytime. I pull from him off the line then he cathes me than i pull again then around mid 4th gear he just walks on me. We even traded quads and it was the same thing, so its not the rider. We than raced on the paved rode and i did a little better but he still beats me. What is the deal?? my mods are listed below. Its an 06 air box lid off w/ pro-design proflow kit pro-design cool head 21cc domes tommy t5's timming plate set at +4 degres pro design water inpeller shift star 1 tooth down in the front and jetting is right on

I have a stock head off an 06 with less than 3 hours on it. make offer.

I hear you man, you must be feeling my pain. I just put a new fuel pump in my 99 Blazer last week.$823.67 for the thing. its the 2nd one I put in, in 2 1/2 years. and my cousin put one in before he sold it to me. This time my friends dad put it in for me. He's a mechanic for chevy and he told me NEVER run the tank below 1/4 of a tank because the gas is what cools the pump and when you run it below a 1/4 tank the pump is no longer sumerged in fuel so it over heats.

The shaft that comes out the end of the slider where does it go??

Man I know how you feel. I bought my first shee (06 SE) back in october and only took it out like 3 times up till a few weeks ago. In stock form it was slow to me, I ride a 1000cc sports bike so it wasnt too ballsy, A bit disappointing. Well last weekend I Did some mods, Toomy t5's,Vforce 3 reeds,cool head 21cc domes, pro flow uni filter, pro flow perpeller, and a modded shift star. Holy Cow the first time I took it out it was a new beast. this thing rips now. so I know how you feel. The more you get the more you want.

What size is the big nut on the cluch?? I think its like 30 or 31mm.

Im installing a pro design cool head, and installing the new studs but they wont screw in all the way. you can see threds still at the base of the jugs. and the studs stick up to far above the head so i cant us my acorn nuts. how do i get them to screw in more?? I used 2 nuts and back them together and all they do is strip the threds on the nuts.

Check out this web site Carbon covers. They dont have the banshee on there site, but my buddy called them and they made him a set.

I have a set of black ones off a 06 SE. Only a few rides on them. no chips or scraches. $70 Shipped.

I will be willing to trade. I have the silver off from a 06 SE. been wanting to get black. post some picks if you can. What year is it off?

what size is the Radiator Hose on the banshee??

Holy S**t, this punk lives right around the corner from my best friend. like 2 mins away. and what flooring company did he say he owns? also in another post I read him saying somthing about a custom banshee shop in spring hill. There is no banshee shop around here, I wish there was.

is there any website that sells +2+1 kits that i can look at?