Oilsmoke

One of my Favorite Band. Love the song 38. special & gimme 3 steps. I Like there new cd alot too.

I am a Varmint Hunter I built a Winchester model 70 in 22-250. 26 inch Bullbarrel, Pillar & glass bedded receiver than Full floated the Barrel, Trigger Pull was Set at 34 oz. Sync Ramline black stock 6x24 power Target Scopes. 22-250 It would shoot a .300 group at 100 yards. I also reload too. 3550 fps 55gr Sierra Blitz Only thing left was there Feet. Few beers and Dobbie to calm the nerve. Dogs bread like Flies, There is a Point to it. Why do you swat them? There dirty? Maybe you don't want them in your House? Or they Just play bug you. But it's more the Gun for me and The long shot. Am I a Sportsman Hell no I am a Target Shooter. You can't even See a Dog with the naked eye at 500 yards and the challenge is the wind. They are very small target like a 6 inch high chunk of 2x4 turned sideways. and as far as the video goes I should make my Own

One Question IQ Test There is a mute who wants to buy a toothbrush. By imitating the action of brushing one's teeth, he successfully expresses himself to the shopkeeper and the purchase is done. Now if there is a blind man who wishes to buy a pair of sunglasses, how should he express himself? Think about it first before scrolling down for the answer... > > > > > > > > > > > > > > > > > > > > > > > > > > > > He opens his mouth and says. "I would like to buy a > pair of > sunglasses." > If you got this wrong...please go dig a hole and hide.

Personal I think Jim Stated a Number to riase intrest and He is one of a Few that Could make it happen, So I will wait and See his pudding. And if he does I will say Proudly PassionRE Ported my SHee and If he come Up Short I still will. Get Grinding Jim

The T5 will Rev-out Better on the top end with a harder pull in the upper RPM range. T6 will to better in the mid to range than on the top end. The t6 just don't handle the extra flow than porting brings But the t5 love it.

check & clean the fuel tanks petcock screen.

cover

I read some where that is Took more horsepower to turn the supercharger than a Ford diesel makes.You can weld with Magneto current and the Sparkplugs are only good for the first 2 seconds.

OH OK. Mine seem to warm up fine. It was sure a mod for under 10 bucks. I love mine.

thats Good too hear Schizo. Did you ever try a differnet slides?

Nick I have the Exact setup I just put the very tip in the the 90 degree part so it will flow. Never had a problem. I ran it all season this year.

that was will done

Where are the Good Pipes? CPI Rockets RDZ GGR Shearer SLP Just teasing Bro.

Agreed You mostly need to add some fuel in the pilots by turning them in alittle and drop the clip one slot. if you where spot on in the hotter temp. and I did misunderstand that post. My bad.

30 degree jump in temp can make up to 3 size main jet change. let's say your rich and 90 degree outside temp. 2 month later it's 60 outside and your Shee runs alot better than you know you are rich if it runs better in colder than hot weather. Common Jetting tool.

Bill Engvall is Coming to mind right Now. Probbally as good as a NHRA TOP FUEL DRAGSTER. About 2 runs .

TDR Power valve Setup. I would go with the 480 ANd your Crank to save 5 bills. Oh and I run a .080 spacer plate with no gaskets and never had a problem And I can swap domes all Damm day if needed. Pro & cons I quess.

I would like to get some new Plug Wires and Caps? Brand Cost Urls would all be helpful. Jim Smart what do you recommend. Pm if you like.

Stan That A&S triple On the Video it did 3.57 second sand run in 300 feet @ 96.7 mph. I think it's the record holder now. But don't hold me to it

Close to mine I run a long rod Compression is to high to run pump gas with my noss head and 19cc domes at 4300 feet. 180+ what are you planned rides ? wood, trial dunes, dragracing. Mx, Desert,Sand pits Coal hills?

KGL Most of them Kurds Had bullet holes in them. I wanted you to know. Everybody Only thing Kerry as Done is Should us How Far up he can stick is head up His own ass and he made it to his shoulders . If you hate Bush Fine Vote for Nader. Kerry a Hippie Tree huggin little Querr. But we need Saddam out of there. On human rights Alone. All Bush did was Finish the Unpopular Job His Dad Started and We all wanted it done back then. Ah Hell Kerrys right Maybe we DON"T need any mideastern OIL for a Banshees. And for all you guy that think Machine guns are a Bad Thing kill are Kids & Cops on are streets Think of this: You think they paid 400 to 1200 dollars for it at the Sport Store Got it register paid taxes for it Or bought it in the black market? Just as couple of issue I find Kerry stand on things are I tell you what you want to here So you vote for me Bullshit. Only thing Kerry as Done is Should us How Far up he can stick is head up His own ass and he made it to his shoulders . A vote for Kerry is a Vote for is 2cycle Band , No place to Ride AND no OIL. Anybody know his stand on Public Ground? Better Check it out before you cast your vote. Know Bush as open up places for us to ride in. That alone should be enough to Get everybodys vote ON A FRIGGEN BANSHEE SIGHT. anybody play Backgammon?

Jim that was Insightful Post. As is any business you will always have the few that are not happy with it.I work in customer Service and See it all the time. If you stand behind your stuff and you do. That's what Counts, after that It's up to your customer to tune it with the combo They have put together. And I know You care.

Sell them T6's Bro. Also remeber Strokers Like AIR. you may look in some bigger carbs too. Stock stroker cranks can be had for under 300 stroker are 500+ look at www.proflow.com for good crank afiar price. Carbs are cheapest new there I have found. Plan before you throw the cash or you will be over 2 G's in minites. Good setup strokers with the right part could be done for 1500 if you shop ebay.

Dunebuddy WHere is this at? Calif?

Nice Try But thats Bullshit. The owner Of Gearheads In my town who loves and as owned many Ktm Had a worn fork slider bushing and Had to wait 8 weeks for this Supreme Technology There wasn't One in the USA. One instant, Other one was My Friend Frame broke at the Peg support. Wouldn't warranty it Either. Poor customer service SO you can Have A KTM Euro Piece. I would have a Kawasaki Any day Even If you Think a Standard fork style is (OLD SCHOOL SHIT)!! Grant Today's Machine are lot better than the Older ones But I never Said they weren't Some People just need a Chevy not a Formula F1 to Play on. I will do better without your advice . My cave is Fine.