jinx44

Yep, AK74 is 5.45X39 vs 7.63X39 for AK-47 and SKS.

I have never used that service, but I have used ones like it in the past. You can actually get any atv/motorcycle up to '97 titled through tennessee.

Here in southeast MO, you can get an AK at a dealer for $300-350, new romanian with american parts (must have 10 parts made here). Full auto is about $1500 and you must have all the paper work. I want a dragonov, and a CETME to add to my collection.

I have some billet tie rods with freshly chromed ends. $60 shipped

HS customs makes a great looking one.

So anyone coming over this way?

$4000 OBO

Bump Someone make an offer.

Proquad, I am done racing. My bike is for sale. D has pretty much stopped racing also. We might still come out if you all are going to be there.

Its loosing its fun. I don't like the promoter at the local track so I have been traveling to races. It was getting too expensive. I bought a mustang and am starting to play with it.

Its a very short track, it will be slick, dusty, and not much room for parking. It will be a slow schedule and they are also racing TT (just not a national TT). D34 and I are both local to the track. We can afterwards. I won't be racing it though.

Picture Second photo. Green frame with white/blue plastic #44. Since the picture it has new factory tank cover in late model blue and a matching gripper seat as well as shearer pipes. The engine is a '99 model. The original frame was bent and it is now on a straight frame. I do not have the title to the new frame, but I still have the orginal and the title for it that can go with the bike if needed. Engine: 4mm, .020" over Passion 12 port stroker. 2 races on new engine. New H129 crank with TZ bearing. NOSS head GRR lockup and GRR clutch saver shift pro, modded star, dogs removed from tranny, billet shifter all for easy shifting. Lightened/slotted flywheel V-force reeds, aluminum intakes, 35 PWK carbs New shearer inframe pipes Dyna ignition Engine may be available seperately. Email with offer. Suspension: +2,+1 Aarms, -1 roundhouse swingarm AFCO shocks 150lb front springs, adjustable rear shock Durablue sway bar LSR adjustable axle Braided brake lines The only thing this bike needs is new rear tires and you are ready to race. It has made 80HP on a low reading dyno. Very fast with a good rider. $3500 Email me at sandric@go.com

I have some stock bore/ stock port cylinders that can be honed and ran with 64mm pistons. $250 shipped

$250 shipped

I have some stock bore/stock port cylinders $250 shipped.

If your crank is still good, sell it on ebay. Buy a Wiesco then you have a crank that is fully rebuildable. Their stock cranks aren't welded, but all of their strokers and longrods are including the stock stroke long rod. Perfect time for a 4mm.

1000RR.net For CBR1000RR's. Where are you from? www.streetfighterz.com is the local stunt forum for st. louis.

Chroming on my shearers that are about 2-3 months old is not as good as my CPI's. The shearer's make more top but less mid and a lot less bottom.

What year is the dyna for?

GRR has some great looking pipes. A&S said that my GRR's would do fine with my CUB's, but I had a friend needing a set and my cubs aren't in yet so I sold them to him. I am getting the shearers that Dan has built for the cubs but I will also be dynoing them against the GRR's that I sold. My friend ran a 4.6 last weekend with a mild gas 350 stock swingarm and the GRR pipes, so something has to be right with them.

I have heard the track in Dyersburg has opened back up this year and is allowing ATV's to run. Any of you heard this? I would be up for a trip to George's. I just hate to drive over 2 hours down and not be able to run. I think I remember how to get there. Is that hwy 412 from Kennett over then go through Paragould and follow the signs?

Jeg's has the best prices on the M/T tires. Stock rim size is 9".

I would be scared to wheelie a car at George Ray's . If you loose control there isn't much to keep you on track. I didn't know you could run ATV's there. Let me know also if you can. I WILL BE THERE!!!!!!!!!!!!! Damn Benton, MO track won't be open this year so I built my bike for asphalt for nothing. Benton is 20 minutes away and that is where I planned on running. From what I saw the time I was down at George's, he let everything else with a motor run so I don't know why he would be against ATV's.

Another tip: I figure 1) If it looks like a Duck.... 2) Walks like a Duck & 3) Quacks like a Duck.... It needs another 10 minutes in the microwave.

Maybe if I try a "direct thrust" bottle with the G3's, I might have made some awesome power.