jinx44

Couple more things to add. Bracket to hold overflow tank after removing the factory air box and a stator that I believe is for a 95-96. Its been awhile and I can't remember what the early and 95/96 plugs look like. I know its not 97-up. I also have a custom brake master cover that has flames and is chromed.

I found a new rear wheel stud in the package from Yamaha, so I have a single complete hub now if anyone needs it. I have now decided to move my shop, and this stuff isn't worth moving around anymore. If someone wants to make an offer on a bunch of stuff together, email me at [email protected]. Otherwise its going in the scrap pile. Thanks to those that have purchased from me.

I just found another set of A-arm bushings if anyone needs them.

Its sold.

Ah. Thanks for the info. I was thinking it fit the late J-arm bikes.

I just came across a Moose replacement brake lever that is new in the package. The package is beat from getting moved around and thrown in parts bins. I will package deal it with any of the above parts. The 3/4" reed spacers would be easy to tap and install a couple nitrous nozzles...

I actually have a Roost Boost in my tool box that I pulled off a Tri-Z many years ago! lol I just noticed I didn't even mention or price the boost bottle. lol I will throw it in someones box if they want it. And I appreciate you buying them. Follow up with me when you get them. Thanks!

Items that have been paid and shipped: Lowering kit, grab bar, airbox, reed cages, intake boots, bushing kit, and brake block off plate. Items that are pending payment: Tie rods/ends and spacer plate. I found a couple more things: Pair of 10x5 front wheels with reinforcing rings. $75 Custom billet aluminum brackets that go in place of the headlights and allow you to mount an Autometer gauge pod facing the rider. VERY cool setup for someone needing a fuel pressure gauge or nitrous bottle pressure gauge. $20 Bearing carriers (all 3 styles that came on banshees). All still have bearings that are intact, and spacer tube. I would plan to replace the bearings. $20 each. Rear hub with one stud missing. $15 Rear shock. Was working great when removed several years ago. $30

I have another one here that is an inverted design, like a funnel. I was only 20-21 back then and didn't have as good of a grasp on how engines operate, but looking back I can see why this funnel style didn't work due to the flame speed. I couldn't give it much timing at all (I was running a Dynatek and was able to easily adjust my curve). It was detonating so badly it would rattle the spark plugs loose no matter how tight you had them. lol .030"

Lots of parts are spoken for so far. No one has been interested in the same parts yet. List of items pending: Reed cages, intakes, airbox, lowering kit, grab bar, spacer plate, bushing kit, brake block off plate, and spacer plate. The guys that have emailed/pmed me about these items have first chance.

You lost me...

Domes are not recessed, if that is what you are asking. They are set up for zero deck. I was going to use them on a 4mm that used a spacer plate.

I haven't owned a banshee for a few years, but I had several back when I was into riding. I have sold all the bigger parts that I had, but I still have a few small things that I need to get out of my way. Though I will be checking this thread and updating it as things sell, the quickest way to contact me is via email at [email protected]. All prices INCLUDE postal shipping and paypal fees. With that being said, the parts are cheap and USPS and paypal will be making far more money that I am. Unless you are buying multiple parts where I can ship them together, prices are firm. .076" spacer plate for 4mm stroker: $15 Front lowering kit: $15 3/4" thick Pro-flo reed spacers: $10 3/8" thick Pro-flo reed spacers: $10 Stock reed cages (3): $10 Stock intake boots (2 modified, 2 stock): $10 Stock throttle covers (3): $10 White Brothers parking brake block off plate: $10 Twist throttle: $10 Aluminum tie rods with chrome tie rod ends: $30 Locking axle nut: $10 A-arm bushing kit: $10 Brake hub for drag axle: $15 Custom domes from Noss Machine for Pro-Design or Noss heads. These have the normal angled squish, but flat dome. David Noss and I tried several different dome shapes back around '01-02 and this is a set he built and I never had the chance to try. They are 18cc. $15 Stock air box with Pro-Flo plate, K&N filter, and Outerwear: $30 Stock swingarm shortened 2": $50 AC Racing grab bar: $25 Stock Radiator: $25

She is definetly a looker. And thank you for the purchase!

Both of these guys are great to sell to. I appreciate it gentlemen.