DaFish Posted February 5, 2006 Report Posted February 5, 2006 i have t5's k&n pods 28mm muniki carbs and bored .40 over ive tried alot of different combos and can't seem to get it right so if someone could help me out with my jettin it would be greatly apreciated i ride at glamis and ocottio sea leveland winter weather please help Quote
FasterThanU90 Posted February 6, 2006 Report Posted February 6, 2006 im at sea level to 500 ft glamis is at sea i suggest a 240 main Quote
shanYE west Posted February 6, 2006 Report Posted February 6, 2006 what jets are you using now and what problems are you having? Quote
rjvoight Posted February 6, 2006 Report Posted February 6, 2006 Let us know what your symptoms are. My bike is set for sea level at the oregon coast and has been to glamis with the same set up in the fall (October weather) with no problems. I am running : 310 main 27.5 pilot Stock needle/clip. K&N with no airbox lid. RJV Quote
DaFish Posted February 6, 2006 Author Report Posted February 6, 2006 (edited) ya but r u guys running 28 mm carbs? right now its at a 290 main 25 pilot and needle is in the #2 groove from top forgot how many groves the needle had and what is a plug chop? Edited February 6, 2006 by DaFish Quote
knight_ripper Posted February 6, 2006 Report Posted February 6, 2006 (edited) do search on plug chop....detailed instructions will follow. I wish I knew what mine were. I can never get mine tuned. Only my mechanic can tell you. Edited February 6, 2006 by knight_ripper Quote
DaFish Posted February 7, 2006 Author Report Posted February 7, 2006 ask him and let me know please Quote
Banchetta Posted February 7, 2006 Report Posted February 7, 2006 If you don't tell us your symptoms, then how are we able to help you??? Most 28 carbs are from other bikes, so the needle taper will be way off base...where did you get yours? Quote
bigboybanshee Posted February 7, 2006 Report Posted February 7, 2006 WE CAN'T HELP YOU IF YOU DON'T TELL US WHAT IS WRONG!!! Is it sputtering, hesitating, backfiring, smoking alot, what is wrong with your banshee? If it is doing any of the above, where in the RPM range is it occurring? Idle? Mid range? Top end? You have to explain what the problem is before we can help you out man Quote
DaFish Posted February 8, 2006 Author Report Posted February 8, 2006 (edited) the guy i got them from didn't sent the float arm and pin Edited February 8, 2006 by DaFish Quote
DaFish Posted February 10, 2006 Author Report Posted February 10, 2006 its idleing when you let off the throttle? Quote
FIRST BANSHEE Posted February 10, 2006 Report Posted February 10, 2006 its idleing when you let off the throttle? 471356[/snapback] Quote
FIRST BANSHEE Posted February 10, 2006 Report Posted February 10, 2006 the guy i got them from didn't sent the float arm and pin 470778[/snapback] this would cause flooding, plug fouling and the engine not to run. also could fill your cylinders with gas and cause a hydro lock where you could bend your rods. I'd fix the carbs first then see how it runs, you need all the parts for it to run right. Quote
DaFish Posted February 10, 2006 Author Report Posted February 10, 2006 i got the arm and every thing and now it won't idle without my thumb on the throttle. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.