JTmachining Posted December 2, 2018 Report Posted December 2, 2018 Thats incredible that i putted about 60 hours in it just for that ;-) Next step is adding domes and the final one adding jackets Science is fun, isnt it ;-) Use electric fan with Yamaha 4 stroke ATV rad if heat is a prob. U all geeked out with electrical as is on ur Banshee Quote
ClaudeMachining Posted December 2, 2018 Author Report Posted December 2, 2018 16 minutes ago, JTmachining said: Use electric fan with Yamaha 4 stroke ATV rad if heat is a prob. U all geeked out with electrical as is on ur Banshee I dont have any cooling prob my friend. It's all for fun. Geeks are doing geek stuff ;-) Quote
JTmachining Posted December 2, 2018 Report Posted December 2, 2018 I dont have any cooling prob my friend. It's all for fun. Geeks are doing geek stuff ;-)SMH Quote
n2otoofast4u Posted December 2, 2018 Report Posted December 2, 2018 Thats incredible that i putted about 60 hours in it just for that ;-) Next step is adding domes and the final one adding jackets Science is fun, isnt it ;-) You've pissed away 60 hours on a model to tell you that water will flow in one side, and out the other???? Claudia........ these are outdated shit boxes! Put down the mouse, turn off the computer, and go find some pussy! 1 Quote
ClaudeMachining Posted December 3, 2018 Author Report Posted December 3, 2018 You've pissed away 60 hours on a model to tell you that water will flow in one side, and out the other???? Claudia........ these are outdated shit boxes! Put down the mouse, turn off the computer, and go find some pussy! Good idea!! Envoyé de mon SM-G965W en utilisant Tapatalk Quote
ClaudeMachining Posted December 4, 2018 Author Report Posted December 4, 2018 Domes added.... Next step, adding jacket.Envoyé de mon SM-G965W en utilisant Tapatalk Quote
ZillaFreak Posted December 4, 2018 Report Posted December 4, 2018 Have you tried reserve flow to see how the divider will act? Quote
ClaudeMachining Posted December 4, 2018 Author Report Posted December 4, 2018 Have you tried reserve flow to see how the divider will act?Not there yet. Next steps will be adding cylinders cavity. I will probably do it in 2-3 steps.Envoyé de mon SM-G965W en utilisant Tapatalk Quote
Ayesully810 Posted December 4, 2018 Report Posted December 4, 2018 try to exasperate the flux tube, more gain there Quote
Keno Posted December 4, 2018 Report Posted December 4, 2018 Don't forget to model a thermostat, since a thermostat greatly increases the amount of cooling.... "Sarcasm is intended in case something is lost in translation" Quote
ClaudeMachining Posted December 5, 2018 Author Report Posted December 5, 2018 Don't forget to model a thermostat, since a thermostat greatly increases the amount of cooling.... "Sarcasm is intended in case something is lost in translation"That was something, isnt it??? The thing that surprised me the most is that the dude at weicked motor sport doent seem to get it either...Envoyé de mon SM-G965W en utilisant Tapatalk Quote
specialblend07 Posted December 5, 2018 Report Posted December 5, 2018 1 hour ago, ClaudeMachining said: That was something, isnt it??? The thing that surprised me the most is that the dude at weicked motor sport doent seem to get it either... Envoyé de mon SM-G965W en utilisant Tapatalk Can you explain what you guys are talking about? Quote
ZillaFreak Posted December 5, 2018 Report Posted December 5, 2018 On facebook, a retard thinks a thermostat is added to a coolant system to improve cooling capabilities, makes an engine run cooler. Quote
specialblend07 Posted December 5, 2018 Report Posted December 5, 2018 13 minutes ago, ZillaFreak said: On facebook, a retard thinks a thermostat is added to a coolant system to improve cooling capabilities, makes an engine run cooler. I thought you were banned from the FB group? Quote
ZillaFreak Posted December 5, 2018 Report Posted December 5, 2018 I am banned everyone, but my minions tell me everything. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.