ClaudeMachining Posted July 16, 2018 Author Report Posted July 16, 2018 Use the fmf springs they are super stiff seem to get a better seal with those. Sent from my iPhone using Tapatalk My pipes do not have standard hooks location. I have 3 hooks on each pipes. I'm still figuring the right combo to have the right length.Envoyé de mon SM-G935W8 en utilisant Tapatalk Quote
trickedcarbine Posted July 17, 2018 Report Posted July 17, 2018 How is it that I dabble in the devil's lettuce regularly and always remember to tighten the hardware? 1 Quote
locogato11283 Posted July 17, 2018 Report Posted July 17, 2018 How is it that I dabble in the devil's lettuce regularly and always remember to tighten the hardware?Because you’re American. Quote
ride.race.live Posted July 17, 2018 Report Posted July 17, 2018 (edited) On 7/15/2018 at 7:25 PM, locogato11283 said: Fucking Canadians. Jesse would’ve blown it up already. Maybe... but I have never forgotten to tighten my PTO nut or flywheel nut guns4children style Edited July 17, 2018 by ride.race.live 1 Quote
ClaudeMachining Posted July 18, 2018 Author Report Posted July 18, 2018 Found the right one to go on the bottom side. I drilled a second holes in the spring bracket.I ordered two 55mm and two 60mm to be able to mix lengthsEnvoyé de mon SM-G935W8 en utilisant Tapatalk Quote
ClaudeMachining Posted July 19, 2018 Author Report Posted July 19, 2018 This!!Envoyé de mon SM-G935W8 en utilisant Tapatalk Quote
ginger Posted July 19, 2018 Report Posted July 19, 2018 once you get the right length lock tite them, they will slowly vibrate loose. Quote
ClaudeMachining Posted July 19, 2018 Author Report Posted July 19, 2018 once you get the right length lock tite them, they will slowly vibrate loose. Yup.Envoyé de mon SM-G935W8 en utilisant Tapatalk Quote
Ayesully810 Posted July 19, 2018 Report Posted July 19, 2018 looks super ghetto, but what ever works ! plus my front rad and gas tank cover are zip tied together lol so who am i to talk Quote
375hp banshees Posted July 19, 2018 Report Posted July 19, 2018 Are your bungs held in by work gear clamps?Sent from my XT1080 using Tapatalk Quote
ClaudeMachining Posted July 19, 2018 Author Report Posted July 19, 2018 Are your bungs held in by work gear clamps?Sent from my XT1080 using TapatalkOn my last 2 sets of pipes i had weld on bungs. This time i decided to try clamp on bungs.Envoyé de mon SM-G935W8 en utilisant Tapatalk Quote
ClaudeMachining Posted July 19, 2018 Author Report Posted July 19, 2018 you ride this paint shaker yet?My springs problem is sorted out. Last thing is filters, but I will make it work this week end I guess.Envoyé de mon SM-G935W8 en utilisant Tapatalk Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.