locogato11283 Posted December 3, 2011 Report Posted December 3, 2011 In an effort to free up the first page of the Repairs and Mods forum, I have created a Tech Info forum for all the pinned links. If anyone has anything they feel would be a good addition to the forum, please let me know. The new forum is located here: BansheeHQ Tech Info Forum Quote
jbooker82 Posted August 2, 2012 Report Posted August 2, 2012 How about what pipes are best thread. Quote
AKheathen Posted October 18, 2012 Report Posted October 18, 2012 it seems to be sullied by those thinking it's the repairs and mods section.... who's moding it? 1 Quote
Dogmeat Posted June 4, 2013 Report Posted June 4, 2013 My banshee is getting pressure in my rad from my cylinders, enough it shot out 3ft with one kick, but I don't think it's from the top orings.toulk my cylinders off and they look %100. Checked compression and ones only 15lbs below normal.. Is it possible my waterpump wore threw my casing and Is getting it from the bottom end..? There is no water in my bottom end oil Quote
03DMshee Posted July 10, 2014 Report Posted July 10, 2014 Im gonna go with flex capacitor on this one..... Quote
jdsfel Posted August 6, 2014 Report Posted August 6, 2014 Im gonna go with flex capacitor on this one..... Quote
samthebeast Posted October 1, 2014 Report Posted October 1, 2014 my yamaha banshee cdi has stoped working i have 3 yamaha rd350 9 wires cdi systems and one stator along with pulsor and magnet can anbody please help me in doing connections i mean wiring because its not giving spark in plugs help me plz Quote
dawnguzman Posted December 2, 2014 Report Posted December 2, 2014 In an effort to free up the first page of the Repairs and Mods forum, I have created a Tech Info forum for all the pinned links. If anyone has anything they feel would be a good addition to the forum, please let me know. The new forum is located here: BansheeHQ Tech Info Forum Hey loco great links Quote
Miabansheeboys Posted December 20, 2014 Report Posted December 20, 2014 Is the dowel pin on the clutch cover really important? I forgot to put it in when i polished it any imput Quote
trickedcarbine Posted November 13, 2015 Report Posted November 13, 2015 If the bike has a timing plate or higher compression, it helps. Quote
trickedcarbine Posted November 15, 2015 Report Posted November 15, 2015 tricked.....are you trippin again? why you diggin up old posts buddy?Think it came up while searching and I just missed the date. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.