Jgspahn

How much to make me one?

When I used to have a Facebook I remember a guy on there way selling clear clutch cover inserts. Does anybody have one? I know you have to get one with the lockup clutch, but at this point I dont really have a need for a lockup. I like the look and ability to see inside the case.. are there any other options out there to do this?

I bought everything he had. A couple of clutches, stators, two sets of cases w/chain whacks, three cranks (I think one may be a stroker crank cause it looks different ) two transmissions, stock carbs, set of old fatty, set of old aliens pipes or something??, bunch of stock front arms, stock and +something swing arm.. Gold mine for 150$. The stuff was his sons who moved off and abandoned all this stuff in his dad's garage.. Real life American pickers!

hmmm nice odds there... Ill sell it to you for 200 shipped starwriter

DAMN thats a 260 dollar stator.. and its crap? That sucks.. If it tests out fine do you think I should still use it? Whats the benefit of a 200W Stator?

Awesome.. It just had a stock front plate or whatever you call it, but hey ill take a 200 dollar basket over stock anyday! Im wondering what makes it better than stock? Wears out slower or something?

Well I have a rear skid plate for like the carrier, but thats all I run. I liked the idea of a belly one. I ride some gravel roads, but i dont think those pebbles are gonna mess anything up on the bottom.

Here is a different angle to explain what I mean. The one on top is the 2nd one from above and the bottom one is the first. Why is it so much bigger?

Here are pictures of the silver clutch: And here are some of the Hinson one, and a side by side comparison of both Didnt really know what angle yall needed to see to tell the wear or whatever, but theres a buncha random ones.

i looked it up on ebay... is that basket really worth 200$+ ? I had a stock front piece on it tho.. online for the whole clutch its freaking 800 bucks.. What makes it so good? Looks like I got a steal with this lot of parts I bought off this dude a few months back!

Ok, so the second one. Just wondering, why not the first? It is bigger than the other two ( I would think that meant more power ) and has like braided wires in it which makes me think better made.. just seems better made, except for having only half the plastic stuff on it. Also, how do you tell if a stator has a floating/floated ground?

I got three clutches in a lot of parts that I bought. This is my first time into a banshee motor so I have no Idea what a stock clutch basket looks like. I obviously realize one is not stock, but id like to know if its a good one. Also the other one looks billet to me, but it could be stock.. iono. I only posted pictures of 2 because there were two of the ones that were silver. 1. I have two of these (above) and both are exactly the same. I included a spring in the picture because I have spring questions at the end of this post. 2. This one (above) is not stock for sure. Is this a good basket? Can they go bad? Do I need to check anything on it? . . . . . . Spring Question now.... . . . I have a picture of three different springs: They are (from left to right) 1. Brand new FAST springs that came with the clutch kit I bought 2.Large gold spring that came outta the black hinson clutch posted above. and 3. Spring outta the silver clutch posted above. . . . . . Annnnnnnnd one more thing... . . . Top one is the brand new FAST clutch kit I bought, and bottom one came outta the hinson basket. Is the bottom one stock? Which should I use? Sorry for the long complicated post.. I should work on getting my point across better and more concise eh..

I found three stators in a lot of parts I bought. They are all three different in little ways.. hopefully yall can help me figure out what is what 1. This one (above) has to be something besides stock. The poles are twice as thick as the other two, and the covering of the wires is like braided instead of just the usual plastic shield. Also, only half the poles are covered in the plastic stuff. 2. This one (above) has all the poles covered in that plastic stuff, and seems to have some wire grounded to it in different places than the first one 3. This one (above) seems to be pretty similar to the #2 one, but it looks smaller and feels lighter or something to me. BUT as an added bonus it came attached to an adjustable timing plate.. SCORE!

Thanks for the quick reply man

Im installing my crank, and I get to the part of the service manual where it says align the bearing knock pins with the pin slot in the crankcase lower half. My two middle bearing have them, but my two out sided dont... is this a problem?

Damn I just sent a pm about the pegs

http://fayar.craigslist.org/mcy/3945926520.html This can't be a banshee can it

Pm Sent

This is prolly showing my ignorance, but does moly grease say moly grease on the container?

I'm in the parking lot of a local Yamaha dealership that stayed open a few minutes late so I could get there.

Sweet, thanks! Anybody esle find it slightly stange for someone to know the Male porn stars by name... JS

whoops.. i guess the img didnt paste... the nut on the clutch

Gotta go buy a socket tomorrow, and I don't want to drag this old shitty motor with me... So what size is it guys?

Booooom

Which one for case sealant