bbcmudtruck

Pm replied. I wish I wouldn't have had my head in my ass when you were selling yours!

If your going to freshin up your bottom end you should just go ahead and have kevin build you a +4 and port!!!!

You have it on backwards. Turn it around and a big c-clip fits on that groove in the splines.

You have a helluva nice bike man, but I'm only lookin for a motor, and preferrably nothing more than a dune port. I hate to see you sell it, didn't you just get it done!

I'm looking for a complete 4mil cub with carbs filters head etc... I would prefer no more than a dune port. Let me know what you got and who built it. Thanks Ryan

Well.... There is just too much going on. To much writing, to many pictures. It's way better than the cartoon one though. Whats the front going to say? What if you made two banshee jugs the "R's" in Herr, or "G's" in juggs!

Hey Gdub we are heading down to LS oct 23rd-26th. It will be my first sand trip as well. Head on up man, I will be the only banshee in my group. Unless Loco is rollin????!!!!

Hey its cool man, just so you know your motor is kickin ass on the dirt track as well. Let me know when you get some stickers made up. Ryan

Haha, well do you have any stickers made up yet Kevin? I don't think I'll need a shirt...

HIllclimber I like that style way better. I'm in no way putting you down grim, I know you've been really working hard on the shirt design, but I think its to clustered and cartooney. I have a winning HJR motor and have been pimpin HJR port work to every guy I beat. I would like to see a more race oriented design. How about something with out Tims bike in it? That bike kicks ass six ways to sunday, it just seems that your trying really hard to make that bike work. Again, no offense but I plan on having me a HJR hoodie and hat, but I wouldn't buy that one. Ryan

I got a BSA 8-32x44 mil dot reticle on a trade the other day. It has side wheel focus and also eye focus. It would be an excellent varmit scope. I got it from a dealer that uses one on his prarie dog gun. It is brand new, never mounted with rings and the warranty papers. I will trade it for parts. Let me know what you got. I will take more or better pics if someone needs them.

I just bought one from the local shop and it was $5 bucks. If you can't find one, I will get you one and mail it. Ryan

One easy thing to do is make your doubles, table tops or whatever to small. Before you make the whole track, make one jump at a time and see how it does (to much or to little), then proceed. We have made a few over the last couple of years and it never fails we make the doubles to small or to close together. They always seem bigger than they are. If you use the doubles correctly you can really air them babies out! Good luck to ya, and for dam sure post some vids! Ryan Here is an example of the doubles being to close together and not big enough. http://s265.photobucket.com/albums/ii224/b...nt=DSCN0714.flv Its very easy to over shoot the table top as well. http://s265.photobucket.com/albums/ii224/b...nt=DSCN0715.flv

Preferably an aftermarket or rebuilt rear shock for 200lbs. Ryan

TTT

I need some 33 pwks and everything to go with them, filters, intake, throttle cable.....

Agreed, I am trying to find a refurb auction on a matching brake lever now, the best I can find is a buy it now for $40. Still better than new price. I would recomend the refurbs though!

I did the same with an ASV F3 clutch. It looks brand new and I got it to the house for $11. It came with the perch also.

Sign in starts at 1:30 today in Mt. Ayr, IA. The Ridgway horseshoe race has been cancelled and will be rescheduled.

Does anyone run a dual rate rear shock? What are the options, can I get my stocker rebuilt and make it a dual rate, or is that an aftermarket shock only? Is there any advantage or disadvantages to running one? Ryan

Mt Ayr Iowa is having straight line drags and I think an atv rodeo this weekend sept. 27th at 3pm. Registration starts at 1:30. Also, Ridgeway Missouri (about 50 min south of Mt. Ayr) is scheduled to have their horseshoe drags that evening. I'm waiting to find out for sure if they are still racing at Ridgeway and will report back with an update. We plan on making both races if possible.

I'll try a set for ya. How bout you sponsor me with a set front and back! :thumbsup: Seriously I'm in the market for some right now, if you have a set a ready to go I'll give them a try, and report back to the HQ. I have +2+1 arms and stock length swinger. Can you get different colors? It would be tits if you could get a blue set made. Ryan

Quick Robin, to the Red Dragon! Haha, I would like to see it in action, looks fast.

It looks to me that you could shim it at the pipe hanger and the stinger hanger. Get you some washers and shim it out from the bike a little bit. It kinda looks like its bent or misaligned anyway. My T5s align with the frame, it looks like yours curves inside it a bit on the left side. Ryan

Hey dude, I'm still interested in the blue frame, I just want to see some 01 blue plastic on it if you can. I don't want it to clash, the frame I have now already does. The price is right man, my local powder guy wants $300 just to powder a frame! Ryan