doorslammer

thanks allot mate I'm gunna get on the lathe asap! do you use the dust caps with these? :thumbsup: :cool:

thanks allot fastrthnu exactly what i was looking for, but i thought there was people already running works shocks with their yfz arms gunna get to work this weekend

if you have 450 arms and spindles on you shee i have a Q for you can you take the shock out and have the arms support itself at full droop and take a measure from the center of the top shock mount and the center of the a-arm mount? thanks

nobody knows?

hey all i have got a set of 450 arms on my shee, and wanted to keep the stock ride height. i planning to buy a set of works shocks but dont know how long they have to be from what ive read, to keep the stock ride height the need to be 17.5 inches from eye to eye, is that right? also does 2003limitedshee still sell the spacers? thanks

i ordered a set of brand new dmc aliens and a pro power pack from the states and it cost me $870aus shipped to my door pm 4stroker on this sites or on www.ozatv.com, he has a set of second hand toomey T5's for sale, bare metal and i think he wanted $500 + P/H for them

i agree im trying to get a heads up on what my jetting should be for my new pipes but after reading through 10 pages and an hour of your time is gone to find that one person had a SIMILAR setup and conditions to what you will be running it gets very time consuming and old quick BTW: from what ive read dmc aliens K&N w/ outerwares and no airbox lid sea level 65-120 degrees F start with 280 mains?

hey are you selling it with the idle srews and tap? how much for, might be interested but i live in aus.

anyone running either of these, or is streamline and mtoion pro the same brand?

hey all looking to get a twist throttle conversion with T.O.R.S carby cap removal. which do you think is the better brand, considering quality, price and performance/how long it lasts for looking for people opinions before i buy thanks

hey all what pipe would you pick out of the two for a rider who does a bit of everything, beach, wide open tracks, tight technical and a bit of MX... thanks

hey all i am after some DMC pipes with alien or 916 muffler set-up need to be able to be shipped to aus and only around the $400usd mark please tell me what shipping will cost to WA 6720 thanks

proxy servers are your best bet like ragesandshee said

i know what you mean... its like having a turbo diesel without the turbo

quoted one of the comments "i fixed my kick starter put a thicker o-ring in it a bit of greese and check the spring and bearing when its taken apart mine was cracked off just replace it with a more heavy spring same size as stock and problem solved by the way ur bike be faster with different powerbands stock clogs it up" read the last bit... the stock powerbands seem to clog up?

did you mean like this bobby banshee solder the red wire to the red one and the black one to the black one and plug her in?

Also what should i set the overheat LED to go off? thanks again...lol

you mean like a little 9v they use in tv remotes etc thanks for everyones help to!

hey man where do you live? ill help you out with the metric mixes cause im aussie and that what we use for 5L of fuel add 160mL of oil 10L of fuel add 320mL of oil 20L of fuel add 640mL of oil thats a 32:1 fuel mix ratio i buy 4 litre bottles and use a 1 litre oil bottle to measure my oil, it doesnt have to be exact. what oil are you using, fully synthetic, semi sythetic or mineral, might have somthing to do with the smoking as well hope that helps

hey all just got my trail tech vapor. just some questions which radiator hose do i put the temp sensor in? should i use the brake rotor bolt with the magnet or glue the other magnet on? how do tap the power without using a battery, can someone give me pics of how they did it and what they connected where? thanks

i have a pro design and havent had any rubbing confusing

yep gave mine a rebuild june 2007, hadnt had one since 2000 when it was made...lol

sounds exactly like mine did and this is how i fixed it i went throuth the wiring and re soldered all the joints (that were splitting or rusty) and than used emalgium (think thats how its spelt) its a tape that steches and seals very well than i got new plug caps and wires (NGK) and replaced the old ones, i think that was the problem i also sealed the wires going to the stator with salastic than i could go through water... happlily i hope this helps

LOL simple and straight forward... gee it makes life easy

this may sound stupid but did you have enough fuel in the tank