2strokespirit

This is all going into a RZ banshee, but yeah maybe, otherwise I will get a 4mm!!

I have put the crank into one of the casings and it does not fit, I have measured the pin to the side of the web and it is about +- 3.25mm more off set than a standard crank, so I guess its a 7mm stroker...

Sorry to hear man, thats bad. I want to add, I also had a almost near death experience when I used the twist throttle for tricky stuff. I have replaced it the next day with my old thumb, twists are for 2 wheelers. Hope your friend recover soon..

Hi this is the pic of the 4mm long rod stroker cranks which I can buy as a dealer from Taiwan for about $160 - $200. Can someone identify it as a name brand crank? Vitos does not make a 4mm Long rod as far as I know, so for who else will these be made? There is a number on the conrod, G - 115. I have a few questions, can one use Yamaha big ends in a hotrods crank if you want to rebuild? http://img182.imageshack.us/img182/8632/dsc001193sl6.jpg I found this on e-bay and if you look at the pics, it runs with the same mains as this hotrods, the only thing that are differant is the spacer between the inner mains have 2 o'rings instead of one. http://cgi.ebay.com/ebaymotors/HOT-RODS-HO...sspagenameZWDVW

Yes, its one of the programs that all the engine builders use. Its a good one, little expensive..

I get the message...

I know there are thousands of bearing companies, but when they enter the countries, they come with a certain "made in taiwan bearing" I just thought maybe one of these componies will sell it with that specific bearing, but tey probably replace it with a more popular bearing. This cranks spacer between the centre mains are a not red like the hotrods. Are all the hotrods spacers red? Anyways, I think its a vitos, but this company claims they made for another well known brandname. Anyways I will have it on Friday and will take a pic..

Please help me identify a crank, I got cheap stroker cranks for $160. Can someone tell me what is printed on the main bearings on the sides, or what is the make of the bearings, of one of these cranks, I just want to see if I can maybe identify this crank. Thanks

You can buy 1 ring pistons from pro x if you ask them, but most 2 strokes have 2 rings, some mx bikes under 175 like the 125s has just one ring. Some has a 3rd ring wich is not the ring, but goes under the 2nd ring. I have never seen a pro lite with just 1 ring for a banshee.

Pump gas? what octane?

http://www.dremel.com/en-us/attachments-an...537&G=66240 I port with my dremel, I also have a 90 degree cutting tool to do the transfers, but a dremel can do the job just as good, I have a Digital 400, variable from 5000 - 33000rpm and use the pencil attachment to do the intake and exhaust. It is powerfull enough, its not the idea to push hard on the metal to make it cut, its how fast it can cut, 33000 cuts/minute. I use it for engineering purposes as well as proxxon.

They are both liquid cooled. :biggrin:

I know what jug you used, there are 2 options!!

:yelrotflmao:

Thay replaced the a-arms!!

I can get the company name, can you maybe pm the name for me please and the info you have, I will call the guy tomorrow and ask him.

Well here is a local company that sells aftermarket products, name brands like wiseco etc. They are importing new cranks, stroker long rods etc, they look like the wiseco and Hot Rods, but they come from Taiwan with no name. They say its the same company that makes cranks for some of the name brands. Hard to believe. Ok so for like $200 I can buy a brand new stroker crank, that is a dealer price, would you guys do it? I just don't like the "made in taiwan" part, but these days so much things is made in Taiwan, even my new Wiseco pistons that was imported from the states, the g pin wrapping says made in Taiwan, the piston is made in USA and the rings is made in Japan. Anything except taiwan... Please guys any comment?

I have sold a lot of trailtech computers in the past, I have a vapor myself, Its a pretty cool toy, but they have all sorts of issues, The speedo cable I have replaced ALL of the computers I sold, they have loads of issues and like said, the connectors is not a year old and they cracked. I have replaced my own one under warrenty 2 times!!! I have done lots of warrenty replacements. Like said its a cool toy, but they have to much issues. If mine will give any more problems I am going to throw it away. I bought it for the water temp gauge which is really accurate. I will just get a water temp gauge. Oh the rev counter on the 2 strokes is also not accurate.

Make 100% sure the carbs are syncronised and close. If all off this is good, you have a air leak somewhere.

What are you telling me? I was under the impression from a website its far cry 2, anyways thats kinda good news in a way.

He does sell 4mm cranks, but they are more expensive..

If you are going to ride hard, you might get a 450.. All engines give problems some time in their life. YFZ450 do like to seize because of the oil pumps, but thats sorted right now. I would buy a YFZ or LTR. If I had the money... KTM 525 XC!!!

i want to clear this up. I phoned HD and the service was excellent, they treated me good and everything was sorted. Listen to this, HDs products are 100% satisfaction guaranteed, they say to me if the balljoints failed after such a short time, they will replace it!!

FAR CRY 2 is CRYSIS. Its the same thing..

word... They are going to "detune" the game so that the PS3 and XBOX can run it, It won't look even close to what it should, like on a pc with a GOOD graphics card and I mean REAL GOOd card. The PS3 and Xbox 360 are way to underpowered, yes WAY to underpowered for the game. I read more then 2 times on the internet that there will not be a game in the next 3 years that will be beating Crysis's graphics. It took litterally a few years to wrote the game... Like said, if you don't like it, its because your PC can't run it, because it is absolutely awesome graphics...