Bansh-eman

go with kevin at herrjugs racing. i have sent tons of guys to him and i have not had a signle person regret it. only possitive feedback

like the title says, im looking for a Rear Marvin Shaw Hillshooter or a Coilover thats 13 1/2 inches Eye To Eye let me know what you got and send picts plz

awsome, thnx alot guys edit: i didnt think about it until just now but all i had to do was messure my shocks that i have right now. durrrrr

ok if you have a stock hieght bike i need someone that can measure the distance from eye to eye of your rear shock mounts. try and get all the slack out of the rear end by lefting it up first then messureing it. i need to know the length for my new shock but i have no way to messure right now thnx greg

nope, i play them all the time.

you want to set your idle off the idle set screws... then you want to sync your carbs by adjusting the pull of the slides using the caps. if you use the caps to hold the idle you can run into problems when you turn the bars, if the cable is too tight it will casue the carbs to open more and rev the motor...

Agree with Xxmelt if you really want to get parts sold and not waste time post picts of what is for sale. it will cut down on the time it take for you to say yes or no i have that item, then you have to send the pict to see if its up to the other person quality. then send payment info... do your self and the buyer a favor and post all the info in one post. they get to see the picts and deside right then if its up to the quality they are willing to pay, then the only thing left is sending payment. there has been too many dead beats doing business like this on here and a few other sites that no one is going to waste their time buying from you when they can buy from someone that is already established and takes the time to post things up right the first time around.

i went ahead and got a set off ebay. everything was 375 shipped. i got them bare though so i can have them chromed.

nah im not getting the brake lines, i just need to get new a arms and tierods now that my shit got stolen... and i refuse to pay lonestar or quicksand prices. i did a little search, i think im going to give them a shot...

anyone else?

Anyone use these A Arms? i see them on ebay but havnt heard anyone talk of them. Anyone have any experiance? I have to buy new arms now that mine got stolen.

i dont have any first hand experiance with them but i have heard enough bad things about the skirts breaking that I'll just stick with weisco

i have a PS3, i dont play any games on it though. i pretty much use it as a blueray player and when my friends son comes over he plays my old ps2 games on there. there arnt as many good games for ps3 as 360 right now. but hopefully it will change.

sold pending payment

i have never riden a bike with fox but i could not tell a single bit of differance from elkas.. i would assume they are just as good as fox.. they have to be to stay in the same market with them... but like i said i have never rode a bike with foxes..

there is a rv place right off the I-10 in ontario (sp?) thats where i got mine at. brand new Extreme Megalite was bout that same amount... had 3 beds and all the normal in and outs... 23 foot yadda yadda yadda

top it off and then start your bike... let it run for a few mins then top off your rad again.... keep doing it until it doesnt drop any more....

just make sure that your radiator isnt gummed up ... connect all your hoses and fill the engin ice... you dont dilute it... its ready to go right out of the bottle... i run distilled water and water wetter. you can make a ton of it for much cheaper.

just go to walmart and buy a jig saw and cut the plastics then get a razor and scrape the edges tosmooth out the melted plastics and then sand the edges to make it perfectly rounded

ill vouch that the chrome ones do look good, only thing is i wish they where thicker...

Ok guys I'm getting some Marvins this go around. I have some Works Performance Pro Series Tripple Rate With Remote Rezzies Fronts and a Work Performance Quadstar Rear Shock with remote Rezzie. Fronts are setup for 210 Lbs and +2 arms Rear set for a 210 rider and a +4 swinger The rear also has a brand new spring on it. They where rebuilt last summer for duning. If your interested Let me know. Ill sell all of it for 500 plus shipping. Also if you wish to use Paypal you cover fees. If not Ill accept Money orders. Willing to split but would like to sell all in one.

click my trip to 29 palms this wek paid off. i made 195 bucks off the left over money i get for food, and got my self some new shocks

i love how the naacp is trying to get invovled and say thahe is being wrongfully profiled and that he deserves a second chance because he admitted he was wrong.... its fuking retarded.naacp, jessie jackson, al sharpton... all of them are stupid worthless bitches. they talk about racial profiling this and hat, but they are some of the most racists basterds out there

awsome, just let me know and ill paypal you the dollars for shipping. awsome, thnx again man! you guys have been a life saver! id never get this thing back together right now without you guys cause of the baby coming in a few weeks.

awsome guy to deal with! he sent me several parts for free when my shit got stolen! Need more guys like him that are willing to lookout for other members on the HQ!!!