ToomeySheeLE

Helps you shift easier.. Until you need to tear into your bottom end its not worth your while. Splitting the cases to change your shift star doesn;t seem to make much sence.

Alrighty, keep me posted.. are those UPP intakes any good? I've heard they tend to crack and get air leaks? Also dave.. would i notice any difference in power from the 35pwks vs 34 pjs? the setup i will be running these on is a 4mm, F.a.s.t dune port, Cpi inframes, pump gas, custom domes.. Thanks for you input. Brad

Hey, Just wondering if anyone has 35pwks or 34pj's they wish to part with, also possibily interested in you intake setup.. Not looking to spend $375 for carbs or i may as well buy them new.. just looking for a used set in good condition. Thanks Brad

Good point Meat Innocent Americans will pay dearly for the mistakes of their tyrant Zionist Government. No matter who they take out Saddam, Bin Laden or whoever, it will never change the fact that america will forever be hated by thousands all around the world.

I have some new pwk28's for sale. With Uni filters and throttle cable.. PM me if interested.. If for some reason you think they are too small(which you wont, unless you do some stroking) you can always have them bored to 30mm.

Grade 7, teacher left room and students started throwing shit up into the fan and watched it wing across the room.. best things were scissors;kid got smoked in the arm, pudding cup, went flying accross the room and exploded onto a wall leaving a nice chocolate stain.. and a skipping rope, kinda ended the fun as it tangled up the fan and slowed its pace... teacher came back in "whys there pudding on the wall?" "why is there a skipping rope hanging from the fan?" luckily she was easy going. Grade 8, we had a supply music teacher and everyone was fooling around and not listening, few of us decided it would be funny if someone walked up and punched him, we convinced the most ballsy kid in the class that we'd turn the lights out and he'd run up and slug him. well it happened just like that lights came back on and teacher ran down to the office to report the incedent, couldn't prove who did it and after the principle gave us a whole class chat still no one would rat... good fun.. Grade 8., we had a supply french teacher.. a real french fucker too, he showed us this really weird video of who he claimed was his son.. it was all french music and a guy was shootin heroin in his arm, he died in the end and it ended with a shot of his whoring girlfriend crying(why we were shown this fucked up video in grd8 is still beyond me)..........anyways after the video he came over to where buddies and I were sitting and fingered my friends waterbottle cap(like he was nervious or something) my friend said "dont touch that with your dirty frog hands" the teacher replied, "oh sorry I forgot i was just playing with my hairy nuts in the washroom".......needless to say a huge deal was made over this and the teacher ended up losing his job..

.......I think thats why he wanted to know if someone had a chart in the first place..... If .030 meant 20PSI he'd be good to go.

Close to Sea level.........400 ft above The main question is how much is gained by taking how much off... that would be the same gain regardless of altitude..

Common guys.. someone must know... Those of you running a milled head, what did you have it milled to and what compression increase was there? say you want to stick with running 91-93 octane, therefore 150psi per cylinder is still safe.. how much milling would that take.. any ideas?

Just came across some Rocket pipes on Ebay, one of the last sets built apparently. Never used. If i didn;t have a set of CPI's I'd be on that like a pedifile on a 12 year old. http://cgi.ebay.com/ebaymotors/YAMAHA-BANS...sspagenameZWDVW

You beat your keyboard when you laugh? I always thought swimmers gorilla taped their nutsack to their ass to maximize water flow.

Hey, I live in Ontario, and have gotten all kinds of shit from Rocky Mountain.. give them a call to place your order. 1800 336 5437.. are you afraid of phones? Its usually a chick and she sounds hot enough.. I usually pay by creditcard and have no problems at all. Have them ship it USPS (united states parcel post) it will go to your nearest post office, and save you money over UPS and other shipping methods.. Good luck Brad

CPI and Shearers are just two of the popular pipes for a drag port.. You could also look into Grand River Racing(GRR) and RDZ pipes. Some people run t-5's as well, and may accually have their powerband come on faster with a pipe like that instead of a really huge inframe, like the others listed. Good luck with your choice. Words of Caution : If your builder is calling his port job a "full port"... I would look into getting someone else to do the porting.. He probally means a drag port because thats as extreme and "full" as you can go....Or on the other hand, as ruined and fucked up you can get your cylinders back if he's not up to the Ultimate dremel challange.

I have a new set of 28pwk keilins for sale if your interested.. Comes with Uni Pod filters, throttle cable, and some extra jets. I'd like to get $350, but open for offers. Brad

Hey everyone.. Just got some TDR reeds for modified motors, I ported my stock cages removing some material just about everywhere and thinned out the middle bar, I see that these reeds are completely one peice with no slit down the center like stock. My question is would it be just as well to remove the center bar altogether or will it make them last longer by offering the reeds more support.. Also it says to use the stock back plates on the instructions.. do you guys that use TDR reeds use that metal stock back plate?Thanks for any info.. I called TDR and the broad that answered the phone may as well be in the porn industry... she was a dipshit...and didn't care to let me talk to a tech...

Yeah.. you messed up.. There are 2 bolts that you need to loosen.. One on the top of the carrier and one on the bottom. they run through, you'll need a wrench or socket on each side.. I believe they are 14mm and 15mm. Easiest to turn your tires so you can fit a socket between the disc brake holes and sprocket hole on the other side.. After these 2 bolts are loosened off, you can go ahead and tighten the adjusting screws on the back(after loosening the locking nuts of course). You should accually notice the carrier moving backward as you tighten the bolts... Feel the chain for tightness and then tighten the lock nuts and the 2 big bolts that you loosened to begin with.. Try to keep the adjustment screws even on each side.. I find counting the number of threads showing the easiest way. I dont have anypics.. perhaps someone else does.. Good luck BRad

I like 14-38 gearing for everything, the ratio is close to 15-41, but saves on rotating wieght.

Yeah it just may not hit with as much power.. I thought you rarely get wide open anyways? If your looking to improve your power all around you need to get some engine mods done, playing with the gearing and tire sizes just changes the way the power gets to the ground, not the overall power output.

If your rear sprocket still has good looking teeth on it, save a few bucks and just get a 13T front at first, it alone will make a noticable difference. Also perhaps your losing alot of lowend with wheel spin, slapping some new rubbers on will make a major improvment. It depends what kind of riding you do as far as changing tire size.. I wouldn't ever use an 18inch rear.. be bashing the rear end off every other rock.

will throw in set of duncan pyramid reed valves for $400........

Everytime i see her on the jewtube these days, she's eating McDonalds.. I bet she'd taste rank....

Man, I wish i got into this post when it was in its prime. If Richards wasn't a kike i think it would have been even a bigger deal. He should have hung a No niggers sign on the way in for his act.

Hey everyone. Trying to sell a new set of 28pwk carbs, comes with throttle cable and 2 Uni Pod filters.. Building the banshee up over the winter and will need to go bigger. Great for the woods racer. Like to get $375, open for offers.. Thanks Brad

Who did you buy that swinger off of for 100$? LOL, I want to find one that cheap.. I see the Swingarm Shop has alot for sale and offer them powder coated for around 200$ but they dont answer emails.... : (

Yeah they are tards.. but tards making a killing if they are smart enough to resell them.. Fuck i wish i tried to scooped one up.. Some of the stores here were only getting 2 units.. I know a guy that got one today and he said that there was a foot race inside Toys R Us... I dont know how he managed to get it without getting beat..