badassbanshee479

this is me vs a 14mill cheetah in a full drag frame.

had a great weekend!! bike ran perfect!

klotz technaplate at 32:1 in the alky bike, atf in the tranny. Maxima super m at 32:1 pump gas in the play bike, maxima mtl 80w in the tranny!

here ya go! this should help! http://www.bansheehq.com/index.php?option=...2&Itemid=28

your pipes are holding you back, I would get the bike ported, pick up some vf3's, advance the timing, and get some cpis or some toomey t-5's. these pipes respond real well to porting and pull better trough the mid range and top end! Also if you are gonna be drag racing, a 2 into 1 carb is not the way to go! it will limit your top end real bad. I would get some 33-35mm pwks if your set on carbs. But they are not needed till ya free up the porting and the exhaust. As far as tunning there are alot of people on this site that can help ya out with all that!

tick tock tick tock are we there yet?? this day is going by soooo slow!!

did you guys even sleep last night?? I know I did not for very long!

we are gonna take over the third floor! we have two rooms, dave has one, and now you have one, sweet!!! party time! dave, cant say I do man sorry. I do how ever have a complete tap and die set :yelrotflmao: we are gonna leave at 6am on friday, cant wait. see ya all up there. I have to go rebuild brents bike.

you need anything dave?? let me know I may be able to help ya out, if not see ya friday in the am!

take your front tires off the rims, put a valve steam in backwards so it will seal the hole and not hit the caliper, then drill a new hole on the other side and insert new valve steam the right way. now ya have offset front rims! sorry to high jack the tread. good lookin set of tires! gonna get a set for my play bike here real soon!

Yep same place as last year. was like 2.65 a gallon.

its right next to the entrance to the dunes. I guess it has a couple of different names. :cool:

if ya got the cash go big or go home! I would run 39's shearers, lock up, override, straight cuts, and a much longer swinger! I have a 10 over on my 4mill and it launches hard as hell! 10 mill is alot of engine and for the most part a drag only engine. but it can be made to do other things! I would get a set of big cheetahs with power valves if you are gonna do other things than just drag! good luck on your decision. Oh and to find out your info on the cases, check out planet sand. I know there are a bunch of guys running them over there.

good to hear its going back together, and that they where not cracked!

thanks for the invite, may have to take ya up on that! dave, dune land has good alky, I have bought most of mine there and never had a problem with it. Bike fired up 4th kick on the stuff that was in it from labor day weekend!

my desk aims at the door so I can shut it off before I get in trouble!

thats how mine is going in! it would not pass db anyway!

better back the timing down and or start running race gas!! You are riding a ticking time bomb right now!

sounds good! see ya there!

man your nuts!!! I let a couple people putt my bike around the yard to break her in and everyone that rode it said it rode so smooth! Thing sounds pissed! Jeff and I made some jetting changes and I think it likes it! No more things that go boom there no motion!!

sweet!!! cant wait! dave you gonna have that beast ready to roll or what?

how was the drag strip?? smooth I hope!

went through 3/4 of a tank of alky today!! thing sounds pissed!!! cant wait to ride!