Animalman294

They are always a good idea, the cooler the bike runs the better it is. The only question you need to ask yourself is if you can afford one................... :beer:

Thats about right to me................. :beer:

Everything that Rippen said is correct. But for $100 bucks who cares get the thing and if you don't like it sell it and go back to what you had............. :beer:

You may check your intake and carbs for air leaks (starting fluid or ether test). If you have an air leak water could just as easily get sucked in and make it run like shit 'til it dries out......... :beer:

You need to get bigger carbs when you start pushin' more air, not just making it flow smoother, or by adjusting the port timings by porting. You'll be fine, but sheck your plugs if you are worried about it............ :beer:

Yeah, thats what I have and never had a problem, except for the damn pick-up wire rubbin' against the flywheel and almost cutting it in two................. But that was my fault................ :beer:

Your sig says you are runnin' +4 timing, if you are runnin' a POS timing-key you may have sheared it off................. If you are get a timing plate they are more reliable............... :beer:

Well Duh.................... :yelrotflmao:

Can someone get the address to that tard, so that we can pay a visit to him and show our appreciation for wasting our time (2:14). If you think for a minute that a back woods moron like that can afford a 60gig PS3 I got news for ya. But that box when thrown bounced like an empty box, not a box that has a heavy computer game in it. When the round was dropped on it, the box again bounced the round off of it like a spring and then it bounced up like an empty box. Then when the host tard pushed on the hole in the box, notice how he pushes lightly and then notices it pushed in to far, plus the box moves again. Why did the box move, there's nothing in it................... :shoothead:

Yeah, it would help a little to know what it looked like and where it was stolen from. I agree though if all that was done someone either made a scouting trip for the lights and then came back later for the quad, or maybe did both at the same time. Does your shop have customers that visit or is it a home type shop? Good luck man........................ :beer:

Yeah, I have some AV gas I'm going to have to put into my lawn mower and weedsater now because its 9 months old................. ::

85 Horse and you are runnin' a -1.5 swinger........................... Bet thats fun to control................. :yelrotflmao:

you will be much happier with the port job. It may cost you a bit more, but it's worth it..... :beer:

Yeah, you should be fine just check your plugs, and you'll really like the V-3's........... :beer:

Well, if ya got the motor and the ambition, put it in and let her fly.................... :beer:

Well just race 'em, if ya need more power get a few more parts............... :beer:

Deja-vu................ :woot:

Motion pro makes a good one and you can get it at any motorcycle shop, as long as it says it will work on a Shee. It's about $10-12.............. :beer:

170 on 91!!!!!!! Damn boy, you at least need to run 50/50, but at 170 you should be on race fuel. You better be dead on with your jetting, because otherwise thats an expensive lesson........ :beer:

Yeah, I heard it is a good way to cook them, but damn it is also extremely dangerous if you don't do it right.............. :shrug:

Damn, seems like everything thats fun has the ability to seriously hurt or kill me............

Yeah, people sue for anything in this damn state.......................... :shoothead:

I agree with dajogejr, you all can see who I fealt comfortable dealing with and he had great prices and took the time to explain things to me............... :beer:

Cotton-Eyed-Joe and Corkforbrains very nicely stated................... :beer: I think that judgement and experience thing was modeled after me............. :yelrotflmao:

Damn, ask and ye shall receive............... :beer: