husky

http://cgi.ebay.com/ebaymotors/ws/eBayISAP...4294&rd=1,1

I took the shee out on the local track and was having some trouble with it breaking up in the mid range. checked timing plate, checked jetting and made sure plugs looked good. The only thing i found is when i stopped running the clamp that connect the pipes were fried. could this be the problem?

Do you still have this bike??

Thanks for the bump!

Are u sure you dont want a craptor???

I just picked up a left over 05...New virgin to play with. My wife said it was either the 2000 or my 06 700 raptor which no one would give me what I need out of that..

I am looking to sell or would be interested in possible trades??? Would like $3000. out of it. Located in Pekin Illinois. Pic in sig. 1. Powder coated frame. Almost everything else was sandblasted and sprayed with farm implement paint. 2. Custom painted Lakers Plastics. 3. After market Full Flight +2+1 a arms and tie rods. 3. Works shocks. 4. New braided brake lines for front and e brake block off. 5. New Front bumper. 6. New handle bars with tether switch 7. New pro peg nerf bars. 8. All new bearings were installed in EVERYTHING while I had it apart. Now for the engine. Very mild. 1. fresh rebuild with new crank rods bearings and pistons. .20 weisco pistons. Engine is very strong with very low hours. Starts within first few kicks. I only ran 100 octane with Amsoil. 2. New chain. 3. New Pro Design filter. 4. Like New DG. Pipes & silencers This quad is in great shape with only minutes of woods riding. I set this quad up for flat track racing but can be used for any type of riding. You will get the quad with like new Razr back tires and bandit fronts.

Very big help...Thanks for the input.

How do I go about sinking carbs and also how do I get the idles of each carb to match? Thanks for any input.

Thanks guys!

I do not have the black box, that is my problem or I would leave it be. Thanks for any input guys.

Anyone???

First off I know that their is other post with the same q's but they answered their own q's before they got a answer so here I go. I am rebuilding the shee right now and all I have left is the tors removel kit. Problem is I ordered it from Vito's 3 weeks ago and still have not received it. I called vitos and I was told it would be another 3 at least because they are out. Now time for the q. Can I disconnect the tors box (electrical) and still adjust the idle with the box until mine comes in..Im dying to go ride and this is mainly all im lacking. Thanks for any input.

Looks good thanks alot..

No lights no switch