MDS2106
-
Posts
766 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Gallery
Store
Everything posted by MDS2106
-
.040 over cylinders with stock porting, comes with weisco pistons,wrist pins and bearings. Ran great just pulled off to upgrade, cylinders still have crosshatch from last rebuild. Needs new freeze plugs, some how the old ones got tossed. $225.00 shipped
-
pm sent
-
+2 brakeline on a +4 swinger both swingarms use stock carrier
-
Here is a couple of pics so you can get a idea of the lenght you want.If you buy a +6 you will have to tie that s.o.b. in a knot.... +4 brakeline on a +4 swinger
-
Sometimes the # of teeth is stamped on the sprocket
-
I put a +4 on my son's and its a little long but it still works.On my bike I put a +2 on when I changed the swingarm and It fit alot better..
-
sold pending payment
-
Leaking coolant into tranny
MDS2106 replied to 4everwantedbanshee's topic in Banshee Repairs and Mods
Might want to pull the clutch side cover off and check the o-ring that seals the pipe into the side cover.. -
were can i buy single jets for my Keihan carb
MDS2106 replied to peterlocal22's topic in General Banshee Discussion
Your local motorcycle shop should stock keihin jets... -
You need 2 circlips per piston.Stock pistons also have 2 clips per piston
-
1 more
-
A set of 34-38mm intakes, worked great moved the carbs back off of the clutck arm. $30.00 shipped
-
uppp
-
pm sent....
-
I have a set of cylinders and pistons off of my son's 2002 banshee, stock porting .040 over.Cylinders need nothing just bolt up and run. $250.00 shipped
-
I picked up a carb kit on ebay for around $14.00
-
66.50 is +.100 over
-
I got some 10 paddles,maybe we could work out a trade.
-
Go to the autoparts store and you can b8es ngk's for a little over $2.00 each
-
When I bought my son's banshee,I noticed that one of the reed cages had some oil residue on the flange a few times after we rode,It wasn't a drip just kinda wet with oil.Well I pulled the reed cage only to find that someone had left the gasket out.I installed a new gasket and haven't had a probem since....
-
RB racing does great work.Here is his website.. http://groups.msn.com/RBRacingTwoStrokePorting
-
Most of the guys we race with, including myself don't run a cross over tube at all.
-
On my stock carbs i ran 360 mains with Rb dune port and pods at sea level...
-
Change the reed gasket..
-
Banshee Inline Radiator Cooler 21 fin
MDS2106 replied to xXBlessedWithDeathXx's topic in Banshee Repairs and Mods
He also has great prices on case savers....
